Rival MT10 breakdown and beatdown!
Вставка
- Опубліковано 27 вер 2024
- link to products used on my build.
CRCU MT10 motor mount
customrcupgrad...
Hobbypark wheels and tires a.co/d/90oIBsp
ANNIMOS 25.5kg/0.07s Coreless Digital Servo Motor HV 7.4V a.co/d/dGkVhiD
Hot Racing SCX10FT01 15mm Wheel Hub Extensions a.co/d/cVNqS7c
Basher Bodies Funnycar body
www.basherbodi...
Cool little bettle🚗
Some good slaps there to test the mount. 100% Certified CRCU.
It's so nice that I don't have to worry about that mount anymore.
Now the only battle I have left with this car is driveshafts. If can get those sorted, this car will be almost unstoppable.
Very cool Captain. Nice ly modified and a good runner. I still have a v1 max 10 sct, been awesome. It s been sitting all winter but i trust i will race it in my slash this summer. Quuality dude. Talk soon
Thanks for stopping by big Phil!
That slash is going to rip!
Nice rig James💪🏻 just incase you didn’t know I’m Joe that was talking titanium heat treatment with the other day on fb👊🏻🚀😎
Oh thanks for letting me know, I've been meaning to find your channel recently but kept getting distracted.
I've got the attention span of a squirrel 😆
Just got back from testing the kagama with the new motor and spur and it's an absolute monster now!
Still gotta install the towers though, but that's next on the list.
@@captaincouldverc awesome I’ll be looking forward to the video 😎
For a cheap and ridiculously fast servo I recommend the SPT Brushless models like an SPT5828W. If your BEC does 7.4 volts the wheels basically turn as fast as your hand on the steering wheel.
I'll pass on that.
It's twice the price and same speed as mine.
Mine is just as fast as that one according to the spec sheet.
Mine is also rated at 0.07 seconds at 7.4v
I don't need an extra 3kg in strength on a car that weighs less than 10 pounds. Especially at that price, mine are almost half the price of those.
I'll stick with my inexpensive ones. Never broken any of these either, and I run these in ALL of my cars.
@@captaincouldverc I might try the cheaper ones if an SPT breaks but so far they have been rock solid. It would be nice to compare actual performance. I have a feeling that the cheap servo spec sheets are a work of fiction across the board :D
@@radiovlogi
If you get one, you'll immediately learn it ain't fiction.
On yours, when you're turning the tx wheel and release it, it snaps back fast and does a quick back and forth bounce right...
This one does that too.
I've literally never seen a faster servo than this one. Even some of the $100+ servos I've personally seen are not faster than this Animos.
This brand shouldn't be slept on.
The one you have only has mine beat on the 8.4v (which I believe is fiction-the scaling of distribution highly suggests this) according to their chart, no strength is gained moving from 7.4v to 8.4.
Which should be how it gets rated at 3 more kg+ 0.01 faster than mine.
The status on 7.4v is the same as what I use.
The one you have, ain't special by any means. Nor is mine, but at half the cost of what your proposing, I'll stick with what has been reliable and great to me. The oldest one I have of these is almost 4 years old and still going fast and strong.
Thanks anyways.
@@captaincouldverc I'll keep yours in mind. Always good to have alternatives knowing that sometimes the quality just suddenly stops on a certain product. At one point jx exoboost was all the rage and suddenly people needed other options for example, because they started breaking.
@@radiovlogi
Don't you put that evil on me!
Don't jynx my budget boys! 😆 😆
👍👍 A Vortex body will works pretty good. im always on the lookout for something else if anyone knows drop me a reply or any good info about the rig. IF the Captian doesnt mind! Ive been running this thing since it was the Helion Avenge and love it. running a cheap 1/10 stadium truck body that fits perfect w new holes on stock post. Its to beat the piss out of. 🤘O and some of these exact tires on ebay/amazon dont have foams!!! Theyr the preglued ones and theyr cheaper. They bout got me!
I don't mind at all! That's what the hobby is about buddy!
Basherbodies makes a body shell that fits the Vorteks and I've seen a few put it on the mt10.
Here's a link to that that body.
www.basherbodies.com/product/8604150/arrma-vorteks
As for the tires without foams, the Amazon link I provided, I can confirm comes with foams.
Ole' Capltain recommended the motor mount to me. Have a castle 1415 combo in mine and bash this piss out of it. Motor mount is straight as an arrow still. Bashed it three times a week for months now. Definitely certified!
I wish I could get mine out more often!
There's a new skatepark I found I need to check out in the next couple weeks when it's stops raining so hard.
Why am I seeing the rival mt10 is discontinued? TA site has been saying it a while now. Google says so too! Someone posted that their LHS said it was getting cut too 3 days ago! What why? Nooooo!!
Are you looking at the V1?
I'm not seeing anything about the Rival mt10 (v2) discontinued.
Link to TA page
www.associatedelectrics.com/teamassociated/cars_and_trucks/RIVAL_MT10/Brushless_RTR/
I know in the next month or 2 they're supposed to unveil some cars in Utah. One of them being a 7th scale street car.
Maybe they're about to do a V3?
But the V2 is still available and yes the V1 (red white and blue color) is discontinued and is not returning.
@@captaincouldverc hope so. Like i said it didn’t worry me till the FB post i read saying someone at their LHS said the mt10 was being discontinued posted 3 days ago. That wud just b a really dumb move rt nw for TA so i hope its just bs rumor. But they do things like that. Wudnt b the first time. I got a lot o money poured thru that rig. Had it since Helion went outta bizz yrs bak now. Got PTSD already!
Don't believe the rumors until TA says it.
People are looking at the V1 page and ignoring the other 2 models of it.
As of now, TA says the Rival MT10 is still in production and 2 different models are available to order. The V2 brushless and brushed.
With the cult like following that car has, it would be fiscally irresponsible for them to ditch that car.
They will ditch the mt8 before the mt10!
100% 😆 🤣
That will break my heart 😆
Looks like they're out of stock on the brushed model, but no mention of it being discontinued.
It's only the V1 being discontinued.
Link below to the brushed version.
www.associatedelectrics.com/teamassociated/cars_and_trucks/RIVAL_MT10_Brushed/RTR/
Thanks for the info. I used your link to get the motor mount and the bash bar. Looking forward to the upgrades!
Awesome! The mount alone is a game changer for harder bashing with a larger motor. I still haven't stripped a spur gear since installing it.
One day I'll get the Bashbar. It looks pretty awesome.
Hello there chap, iv got an mt 10, so the skid plate like a y shape that screws in2 the gearbox at the front. Iv broke 2 now iv just got the parts to fix it. I rekon thays the weekest part any suggestions on how to strengthen them?
Yeah that's certainly a weak spot.
As of now there's nothing officially on the market that I would recommend.
Hopefully soon there will be a majestic company to help us out with that part. I have been bugging a few companies about this part and showing them how often I get this exact question.
Hopefully soon.
I can't recall where I heard this but I was told to boil or put them in hot wster and it makes the plastic stronger,. Have u or any1 heard of that at all?
All rumors with no scientific backing.
At most, you can add oils to help retain original flexibility but can not make it much better.
There is certain things you can do to your suspension to avoid this breaking so often, but this only works if your breaking it from jumps, specifically skatepark ramps, and will not work if you're just crashing into random objects.
I don't take it to the skate park, I take it on a field, and bike track in the woods. I broke it jumping the grass humps on the field. Iv put rpm arms a fastrax front bumper thing. wheel spacers so it's wider new suspension was nxt on the list. Any other upgrades u can suggest would b welcome also which videos of urs to watch that would help me out. Cheers captain thanks for responding.