My radio bezel did not just pull off. 2:47 I had to remove the two screws from the lower storage compartment, and slide it out of the way then remove two screws from behind the cup holder face and two screws from underneath where you pull the cup holder out. This was on a 2002 Oldsmobile Silhouette. So not all of them snap in.
+Ncw Wcn That's what we're all about! Glad to hear we've been able to help out. Thanks for checking out our videos! If any of our viewers need to make this repair, we carry the part shown in this video on our website. Here's a link to them. We also offer free shipping on all orders in the US. www.1aauto.com/1A/WindshieldWiperSwitch/Chevy/Venture/1AZCC00168?UA-cam&CTA%20Comment&ATony
I've got an '08 Uplander and I'm trying to replace the turn signal switch, but the damn steering wheel tilt lever is bolted in. It is steel, like the Venture's but longer and has a hole in it where the bolt goes thru. I pulled the screws (2) holding the plastic lower steering column cover in place. Could one of these be holding that tilt lever in place? I need help with this right now!
At about 7:02, he says, "stick it up in there." It's what GM did to us with this van and it's multiple "creatively" designed systems. Definitely not engineered by GM's A-Team. ;)
Your car takes a different part number, you may be able to apply some of the basic steps to you car. We carry new turn signal switches for your 99 Buick Century on our website. 1aauto.com Part Number: 1AZCC00165 call toll free 888-844-3393
My 05 venture has cruise turn signals and high beams. Low only on one side... Door windows dont get power, And my wipers dont get power. Could this be the cause? I tested the fuses and motors work fine. Just looked up the wiring and ran power to them. Anyother clue about what it could be.
Hi, can you please tell me where is the turn signal flasher/hazard warning flasher located? I don't need to replace everything you mentioned in the video, but just the switch controlling the signals/hazard lights. Thanks, and your videos are great by the way!
@@navafam7009 I've done that and haven't got any good info yet 😢. The carpet idea sounds like a possibility. I might as well finish taking my car totally apart for a part that should be in the fuse box if not made by a--holes
The 2005 Chevy Impala uses a different style turn signal. We currently do not have an auto repair video for this particular repair. We do carry a new turn signal for your Impala on our website 1aauto.com with FREE SHIPPING 888-844-3393
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
My radio bezel did not just pull off. 2:47 I had to remove the two screws from the lower storage compartment, and slide it out of the way then remove two screws from behind the cup holder face and two screws from underneath where you pull the cup holder out. This was on a 2002 Oldsmobile Silhouette. So not all of them snap in.
This really helped me redo my turn signaling on my 02 Montana! Thanks!!
+Ncw Wcn That's what we're all about! Glad to hear we've been able to help out. Thanks for checking out our videos! If any of our viewers need to make this repair, we carry the part shown in this video on our website. Here's a link to them. We also offer free shipping on all orders in the US. www.1aauto.com/1A/WindshieldWiperSwitch/Chevy/Venture/1AZCC00168?UA-cam&CTA%20Comment&ATony
I've got an '08 Uplander and I'm trying to replace the turn signal switch, but the damn steering wheel tilt lever is bolted in. It is steel, like the Venture's but longer and has a hole in it where the bolt goes thru. I pulled the screws (2) holding the plastic lower steering column cover in place. Could one of these be holding that tilt lever in place? I need help with this right now!
Do you have a video showing how to replace the wiper switch on a 2007 chevy aveo?
At about 7:02, he says, "stick it up in there."
It's what GM did to us with this van and it's multiple "creatively" designed systems. Definitely not engineered by GM's A-Team. ;)
Your car takes a different part number, you may be able to apply some of the basic steps to you car. We carry new turn signal switches for your 99 Buick Century on our website. 1aauto.com Part Number: 1AZCC00165 call toll free 888-844-3393
My 05 venture has cruise turn signals and high beams. Low only on one side... Door windows dont get power, And my wipers dont get power. Could this be the cause? I tested the fuses and motors work fine. Just looked up the wiring and ran power to them. Anyother clue about what it could be.
Hi, can you please tell me where is the turn signal flasher/hazard warning flasher located? I don't need to replace everything you mentioned in the video, but just the switch controlling the signals/hazard lights. Thanks, and your videos are great by the way!
sorry, forgot to mention, I have a 2003 Pontiac Montana.
I believe its under the carpet up under the steering column. Google venture relay location and You should be able to find it even in your montana.
@@navafam7009 I've done that and haven't got any good info yet 😢. The carpet idea sounds like a possibility. I might as well finish taking my car totally apart for a part that should be in the fuse box if not made by a--holes
What do you do if the radio surround won't come off?
Can I apply this video for a 1999 Buick Century?
great video thanks from Joe
The 2005 Chevy Impala uses a different style turn signal. We currently do not have an auto repair video for this particular repair. We do carry a new turn signal for your Impala on our website 1aauto.com with FREE SHIPPING 888-844-3393
Doesn't the switch just unplug from the wire harness? This is crazy.
Anybody lose the keys & needed to replace key swith but bc keys lost you can't move shifter down!
That peice of plastic they tell you to hold is 9mm put a open end wrench on it to hold it easily.
+Daniel Duke Thanks for the feedback!
My venture dash lights, brake lights and parking lights do not turn on