Sweeeet build as always. Upgrading rc,s is a bit of an addiction. But a fun one. I'm patiently waiting for spring up here in the white mountains. Praise God for blessing us so we can enjoy this technology like we do. ❤️🙏
Brother, you are the gas RC king! Need to make a billet cap with a breather so I can put it in the Eastside/TMR Baja and use the one you made on my other Baja. It looks funny with all the upgrades that Baja has to have a stock gas cap. Tyson was tired lol
I appreciate that! This is really my favorite part of the hobby! I like tuning the engines too! The maintenance part of the hobby has always been my favorite part! Its like a giant model ! The personalization is endless with all the goodies you can get! I hope you have a great week brother! 🤝
@@eastsiderc thanks brother! I’ve only been in this 5th scale hobby a year and loving it can’t wait for your 30DNT video😃 you’ve got a great channel keep them videos coming have a good week🤙🏻
@@eastsiderc everything fit very well, did Dan have all of those goodies you installed? Can you post the finished weight on this one as many will find their way to the race track. Can't wait to see the running video and tuning results!
Woweewawa!! Congrats on the 2k subscribers brosef 🥳🤘FYI the MCD Buggy has the heat shield formed as part of the side guard, id definitely recommend trying to fabricate some sort of shield between them YEEEEWWW!!
Thanks Mike I appreciate ya checking it out! I agree definitely need a heat a shield 🛡️ of some sort!! Ill come up with something! Good to see you in the comment section!! I hope has been going well with you brother!!
That buggy is a lot tighter fit than the Rally for sure. I can see a lot of carving needed for the Speedmetal pipe. That's a shame. In has lots of low end grunt ...but does give you a excuse for another RC.....lol
I know man It doesn’t appear I can use it but maybe if I do some heat insulation tape on the plastics I could get away with it. I can always send it back to ya too.
@@eastsiderc sounds good brother just had to figure out a way to message me your address look me up on Facebook or email just tell me how you want to do it
I know MCD makes alot of the metal pieces and they are light and strong...Just curious about the weight of the metal pieces you added (R5 pieces). Is there a significant weight increase?
Nope there is not a real significant increase only mere ounces but I would say its a good 8 ounces spread throughout. I really need run this soon. I’ve got a good bit going on at the moment
I have a question to run past you I think I asked the question but I’m looking to buy the primal rc anniversary grave digger being you have it is it truly with the money and did you take apart the hole truck and gone throw it including the drive axle wanting to know what I need to do and go throw once getting this truck I watch your videos and appreciate it a lot thanks and look forward to what you have to say my brother
The grave digger is very cool and definitely expensive is it worth it . Yeah Is say so I like mine and no I did not go through it . Mine will be a high dollar display piece Im going to run my ram and go through that truck and get a grave digger body for it
Sweeeet build as always. Upgrading rc,s is a bit of an addiction. But a fun one. I'm patiently waiting for spring up here in the white mountains. Praise God for blessing us so we can enjoy this technology like we do. ❤️🙏
Awesome comment bro! 110% agree Amen my brother in Christ! 🙌🇺🇸🙏🤝
The Eastside RC way is looking good! 👍👍👍 Tight and right and buttery smooth!😀 Whew sure looks 👀 technical.
Hahaha thanks Mom! I forgot one little detail but nobody has caught it yet! Lol its now fixed of course
Brother, you are the gas RC king! Need to make a billet cap with a breather so I can put it in the Eastside/TMR Baja and use the one you made on my other Baja. It looks funny with all the upgrades that Baja has to have a stock gas cap. Tyson was tired lol
Haha yeah Tyson was! He was ready to shut down for the evening! And thank you bro! If you need anything for that cap let me know!
I may have to make one and put it on the old Raminator in case it turns out ugly the first try lol. Thank you as always brother.
That 30 Deg North truck looks AWESOME with the Blue Groove Modelsports logo on it. Thanks Jeff...
Hey Robert you’re welcome and thank you brother
Wow Jeff thanks for the shout out!! I appreciate it!! Buggy looks great. I’m not a bettin man but the screws are from the top of the shroud
Thank you brother Kyle and you are exactly correct thats where them screws came from haha!
That looks sweet bro love these build and upgrade videos 🤙🏻
I appreciate that! This is really my favorite part of the hobby! I like tuning the engines too! The maintenance part of the hobby has always been my favorite part! Its like a giant model ! The personalization is endless with all the goodies you can get! I hope you have a great week brother! 🤝
@@eastsiderc thanks brother! I’ve only been in this 5th scale hobby a year and loving it can’t wait for your 30DNT video😃 you’ve got a great channel keep them videos coming have a good week🤙🏻
@@eastsiderc everything fit very well, did Dan have all of those goodies you installed? Can you post the finished weight on this one as many will find their way to the race track. Can't wait to see the running video and tuning results!
@@thatoneguy2756 I got all these goodies from Ali Express brother!
Schweeeeet ride bro !!! Tight right dynamite !!!!
Thanks Wayne Hope you’re having a great start to the week brother!
Woweewawa!! Congrats on the 2k subscribers brosef 🥳🤘FYI the MCD Buggy has the heat shield formed as part of the side guard, id definitely recommend trying to fabricate some sort of shield between them YEEEEWWW!!
Thanks Mike I appreciate ya checking it out! I agree definitely need a heat a shield 🛡️ of some sort!! Ill come up with something! Good to see you in the comment section!! I hope has been going well with you brother!!
The buggy is looking good. Great job
Hey thanks man I really appreciate it. Hope you’re having a super awesome week.
Sick footage brother
Thanks Brother hope your week is a blessed one
That buggy is a lot tighter fit than the Rally for sure. I can see a lot of carving needed for the Speedmetal pipe. That's a shame. In has lots of low end grunt ...but does give you a excuse for another RC.....lol
I know man It doesn’t appear I can use it but maybe if I do some heat insulation tape on the plastics I could get away with it. I can always send it back to ya too.
Sweet build 💪👍👊
Thanks brother! It was fun!
Looking sick dude!! Very tidy.. Notice your prepared - expecting trouble?
Thanks bro and I just always have that gun near me. It’s my carry weapon. It’s a nice little piece. I’ve had it for years.
Nice build. Those screws come from the servo mounting screw holes? Lol
They came from the engine fan/flywheel cover haha! Nice try though
@EastSide RC haha. That was my second guess. My rovan lt came with those screws for the servo mounting hardware
beautiful as always where do you buy all the f5 aluminum accessories
Ali express
Yes like Bluegroove said AliExpress from FLMLF store
Hey son lookin good 👍👍😎
Thanks Dadio! Haha! Be fun to try it out!
Morning Jeff
Good morning my brother I need to catch up on your videos ! And Id like to send you some stickers for one of your stickers brother!
@@eastsiderc sounds good brother just had to figure out a way to message me your address look me up on Facebook or email just tell me how you want to do it
EastSide RC, how would someone go about reaching out to you privately? I need some help on Rovan Baja Buggy and you do make it right and tight!!!!
Facebook in messenger would be the best way bro! My profile pic is me with s Taylor RC hat on and sunglasses
@@eastsiderc What is it under EastSide RC or your name?
Its under Jeff Lohr sorry bro
I know MCD makes alot of the metal pieces and they are light and strong...Just curious about the weight of the metal pieces you added (R5 pieces). Is there a significant weight increase?
Nope there is not a real significant increase only mere ounces but I would say its a good 8 ounces spread throughout. I really need run this soon. I’ve got a good bit going on at the moment
I have a question to run past you I think I asked the question but I’m looking to buy the primal rc anniversary grave digger being you have it is it truly with the money and did you take apart the hole truck and gone throw it including the drive axle wanting to know what I need to do and go throw once getting this truck I watch your videos and appreciate it a lot thanks and look forward to what you have to say my brother
The grave digger is very cool and definitely expensive is it worth it . Yeah Is say so I like mine and no I did not go through it . Mine will be a high dollar display piece Im going to run my ram and go through that truck and get a grave digger body for it
I appreciate you valuing my opinion! If you are going to run it, then I would get the regular one well, that’s entirely up to you
Thanks you so much for your opinion cause that will help me in making my decision on buy this truck thanks again
When you gonna make a brap video of the D5 ?
Soon brother Im in a serious bout if rain and that has put me on hold
@@eastsiderc Hey there bro!!!! Hope it's drying up nicely for some brappedy brap brap
Have you ran this buggy much? what are your thoughts
Not yet Im getting ready to do a BRP tire conversion . Working on it , its fun. Seems decently made
Will you be racing this?
Nope I dont race I just have fun and run bashing but not thrashing 😂