hello, i have cardboard cutting machine, creasing tool not working it doesnot moving up and down, it new machine, it is possible servo motor damaged. when i shift creasing tool this is buzzes can you help me.
I had did wrong connection for power cable which is U and W I installed it up side down. Then after that the motor become heat. Is that make the motor broken because when I tried to run it, the servo drive give signal short to earth. Then power supply tripped.
Check coil resistance between the phases. It should be very small (a few ohms) and equal to each other. Check the resistance between each phase and the motor body. It should show an open circuit. If this is not the case the motor is gone.
Brushed servo are not very popular but we have two out of 10 cnc machines in our factory which use brushed dc servo motors. A 1990 model Anilam milling machine and 2002 model Euromac MTX 1250 turret punch press. Generally speaking any actuator which can propotionally control a variable using feedback is a servo system. Even induction motor with encoder feedback and a vfd can be used as a servo motor.
@@mk-zm6lu I really cannot say because I made this vid during my fulltime job. It also depends on your equipment. I needed 2 months more or less - but I had a fulltime job.
@@learnchannel-TV 2 months?! Too much. Even a week is too much. If you want a simple tool, use SW Composer. Although it doesn't have all the abilities that Blender has, apparently.
@@mk-zm6lu I made this vid during my full time job during my spare time. I like Blender - it is very powerful. If you work with Blender daily you can make in in one week - yes.
Thanks for the information. Keep moving forward and always be successful. Keep up to date all the information about Electrical and electronic engineering. My best regards Fandy Nuari Pasaribu. Senior Electro Technical Officer at Oldendorff carrier.
The inertia depends mainly on the diameter and not on the length. In order to nevertheless achieve the necessary motor torque, servo motors usually have an elongated shape.
Boa tarde! Tenho uma dúvida sobre servomotor: Tenho um conversor de frequência que controla a velocidade de um servomotor, porém o que aconteceria se eu invertesse o sentido de rotação trocando os cabos de saída do conversor de UVW para UWV e posteriormente colocasse na posição original, mas ao invés de colocar os cabos de saída pro motor UVW colocasse VWU...Desse modo teria colocado no sentido inicial, porém fora da sequência padrão...O que aconteceria? Funcionaria normalmente? O conversor iria gerar alguma falha? UVW - HORÁRIO UWV - ANTI VWU - HORÁRIO VUW - ANTI
most of them are PMSM (permanent magnet synchronous motor) with absolute or incremental encoder,they have permanent magnets in the rotor (neodym) and the stator coils have a distributed winding for sinusoidal driving just like the ac motors.
First: Any motor used for positioning in e.g. CNC machine or robot can be called "servo motor". A servo drive must have a feedback system. The stepper motor can be clasified as a DC motor. A RMF is created by switching the stator voltage on and of or by reversing the polarity of the voltage. A hybrid-stepper has very small step-angles. Driven in microstepping mode you nearly cannot notice the steps. For very simple position you can use stepper without a measuring system. Talking about an AC servo motor you usually mean a 3-phase-synchronous motor. The current within the stator winding is steady or analog. This motor makes no steps like the stepper motor. Very small industrial robots, like Misubihi offers, use stepper motors as servo drive. Bigger robots (Kuka, Fanuc, etc.) use AC servo drives.
Steppers usually move 200 steps per revolutions and no feedback means there is no guarantee that the motor actually moved those steps. Servos on the other hand have high resolution encoder feedback. I have seens servos with 2000 to 65536 pulses per revolution. This means that you can control the shaft movement with a lot more accuracy. So the answer to your question is that servo motor can make small controllable "steps", much smaller than a stepper. Although they are done in an analog fashion.
I don´t know if I understood you right. You can get servo motor with different IP. The feedback loop ( for example by a resolver) provides the information about rotational speed and the angle of the rotor.
Thanks for the reply, I work with servo motors on injection molding machines and I've noticed they seem to run rather hot even at normal load and also seem to be built rather air tight, external cooling fins instead of any internal air cooling and was just wondering if that's why they need an internal dust free environment for the built in positional feedback loop system.
@@darrylanton9323 Some that are built for continuous operation incorporate separately powered cooling fans. Servos aren't cooled by a shaft-driven fan like typical AC motors because they are used in applications where they run for short duration or at low speeds. They have to dissipate the heat through the case or add external means. If your servo motors get really hot while holding one position, the tuning of the servo drives may be too aggressive.
Yep, I've seen that some of our newer large machines have incorporated blowing fans mounted on the end of the servomotor directing air up the external fins towards the business end. The new hybrid machines that incorporate hydraulic pumps driven by servomotors are more economical then full hydraulic and don't require as precise tuning as full servo electric machines do, luckily these full electric machines have a graph bar (0-100%) that's shows the servomotor load on each of the four variable servomotors that run during the process so adjustments can be made before overloading the motors and shutting the machine down.
@@darrylanton9323 it will be air tight if the output shaft has oil seal.such small opening does nothing to cooling. from the encoder end it must be sealed, because any contamination to encoder harm.
Why can't we change direction of ac servo motor by swapping the uvw leads. I was told servo motors are same as induction motors with encoder and gear control. Is this true
servo motors and induction motors have one thing in common: the rotating magnetic field. Servo motors have a permanent magnet as rotor and induction motors a "squirrel cage". Inthis vid I explained the RMF: ua-cam.com/video/vMu6DmfKHTs/v-deo.html
Induction motor with encoder feedback and vfd can be used as servo motor but is not commonly used in servo systems. Permanent magnet motors are best for servo systems because of their high starting torque. Direction of ac servo can be changed by swapping two leads but no one does that because it is needless. Servo amplifier can do this without swapping any leads. It can do other advanced things like torque, speed and position control
The drive has to be connected according to right turn phase sequence . If not, or one is missing, it gives a fault phase sequence error. The motor has to be connected accordingly ( U,V,W ) The shaft encoder on the motor will detect wrong turning direction. Direction, speed ( = frequency ) ... can be easyly set by parameters. Some drives like Siemens Micromaster can be set using parameters that inputs on the terminal can be used to determine speed and turning direction. It even supplys the 10 V operating voltage conviniently.
Yes you can drive a servo motor by pulse and direcion signal. Servo motor is widely driven using pulse dir signals. It is called position control mode of a servo motor.
I can give you the text in english as a pdf-File. You can help this chanel if you translate he text in your native language. Contact me via e-mail: info@learnchannel-tv.com
Actually any particular names don"t matter (any servo amplifier has a lot of feedback systems: at least for INSTANTANEOUS current control). For example yaskawa name the controller as servopack(that is their protected trademark). So it can be {servodrive,servopack, servocontroller, servoamplifier, servodriver }...
Motor de passo é classificado como motor CC. O motor síncrono trifásico síncrono tem uma tensão de alimentação e controle diferentes. Mas você também pode usar o motor de passo como um servomotor.
@@learnchannel-TV I am an electrical engineer student and I want to incorporate animation in my presentation at school. could you recommend a website to get free models.
Very helpful
Just a suggestion, don't show the feedback on the outside shaft. That's almost always for secondary feedback applications and confusing.
Good Demo!🙂
thks
Very nice video
thanks
thank you
Next video is coming soon!
Good work
thank you
hello, i have cardboard cutting machine, creasing tool not working it doesnot moving up and down, it new machine, it is possible servo motor damaged. when i shift creasing tool this is buzzes can you help me.
Quien esta aquí por el Angelito?
Thax
hi
Nice amazing
Thks
I had did wrong connection for power cable which is U and W I installed it up side down. Then after that the motor become heat. Is that make the motor broken because when I tried to run it, the servo drive give signal short to earth. Then power supply tripped.
if the isolation between the coilwindings is still intact it should work anyway.
Check coil resistance between the phases. It should be very small (a few ohms) and equal to each other.
Check the resistance between each phase and the motor body. It should show an open circuit.
If this is not the case the motor is gone.
Wow
Are brushed servo motors a thing?
Servo motors are used together with a closed-control system. But brush-motors in general are
used less and less because their high wear.
Brushed servo are not very popular but we have two out of 10 cnc machines in our factory which use brushed dc servo motors. A 1990 model Anilam milling machine and 2002 model Euromac MTX 1250 turret punch press.
Generally speaking any actuator which can propotionally control a variable using feedback is a servo system. Even induction motor with encoder feedback and a vfd can be used as a servo motor.
ok thats accellent
Thank you
What is the animation software used for this video?
software is called Blender.
@@learnchannel-TV
How much time does it takes to create such an animation? I work with Solidworks Composer and want to know the difference.
@@mk-zm6lu I really cannot say because I made this vid during my fulltime job. It also depends on your equipment. I needed 2 months more or less - but I had a fulltime job.
@@learnchannel-TV
2 months?! Too much. Even a week is too much. If you want a simple tool, use SW Composer. Although it doesn't have all the abilities that Blender has, apparently.
@@mk-zm6lu I made this vid during my full time job during my spare time. I like Blender - it is very powerful. If you work with Blender daily you can make in in one week - yes.
Subtitle 😢
how to make this video?
1:48 The control system diagram. （for own use）
Thanks for the information. Keep moving forward and always be successful. Keep up to date all the information about Electrical and electronic engineering. My best regards Fandy Nuari Pasaribu. Senior Electro Technical Officer at Oldendorff carrier.
Thank you, next video will be electric transformer.
Sorry friends - I uploaded this vid a second time now. There was a problem.
Here's the link to the synchronous motor video if anyone's interested!
ua-cam.com/video/OxoGG9SoVG4/v-deo.html
Thanks for your help.👍👍
Good video. How increasing the length (weight) reduces the moment of inertia?
Thanks.
The inertia depends mainly on the diameter and not on the length.
In order to nevertheless achieve the necessary motor torque, servo motors usually have an elongated shape.
@@learnchannel-TV Thanks for your excellent work. Keep it up.
Good video. Can anyone tell please what is the role of the "brush" in brush DC motor?
Thanks.
Watch this video - it is one of my best
ua-cam.com/video/1Y_pQCUdUcw/v-deo.html
@@learnchannel-TV Sure. Thanks.
Boa tarde!
Tenho uma dúvida sobre servomotor:
Tenho um conversor de frequência que controla a velocidade de um servomotor, porém o que aconteceria se eu invertesse o sentido de rotação trocando os cabos de saída do conversor de UVW para UWV e posteriormente colocasse na posição original, mas ao invés de colocar os cabos de saída pro motor UVW colocasse VWU...Desse modo teria colocado no sentido inicial, porém fora da sequência padrão...O que aconteceria? Funcionaria normalmente?
O conversor iria gerar alguma falha?
UVW - HORÁRIO
UWV - ANTI
VWU - HORÁRIO
VUW - ANTI
please sent aasembly drawing of amk make hellow shaft servo motor
Podrías decirme que aplicación tiene los motores servo en los engranajes.
Gracias :)
most of them are PMSM (permanent magnet synchronous motor) with absolute or incremental encoder,they have permanent magnets in the rotor (neodym) and the stator coils have a distributed winding for sinusoidal driving just like the ac motors.
Kindly give the name of Good Quality Sensor to convey the stop & Start commands because I used omron sensor but it lacks many time
I think this could be explained better
Then explain it better
Kaç yılından beri kullanılıyor
pola thevdiya
Very good motors for sim racing 🏁
These your videos are exceptionals!
Thanks for shared knowledge.
👍👍👍
thanks
Michel R. Silva j
Can servo controller make small controllable steps (with rated torque)? Like stepper motor? Or step of servomotor big more then stepper motor?
First: Any motor used for positioning in e.g. CNC machine or robot can be called "servo motor". A servo drive must have a feedback system.
The stepper motor can be clasified as a DC motor. A RMF is created by switching the stator voltage on and of or by reversing the polarity of the voltage. A hybrid-stepper has very small step-angles. Driven in microstepping mode you nearly cannot notice the steps. For very simple position you can use stepper without a measuring system.
Talking about an AC servo motor you usually mean a 3-phase-synchronous motor. The current within the stator winding is steady or analog. This motor makes no steps like the stepper motor.
Very small industrial robots, like Misubihi offers, use stepper motors as servo drive. Bigger robots (Kuka, Fanuc, etc.) use AC servo drives.
Steppers usually move 200 steps per revolutions and no feedback means there is no guarantee that the motor actually moved those steps.
Servos on the other hand have high resolution encoder feedback. I have seens servos with 2000 to 65536 pulses per revolution. This means that you can control the shaft movement with a lot more accuracy.
So the answer to your question is that servo motor can make small controllable "steps", much smaller than a stepper. Although they are done in an analog fashion.
GOOD VIDEO
Please, give the link of play list to check the complete video. regards
good morning in any program was the work of this >>>> thank you very much
Hi - this animation is made with Blender.
해석 ㅋㅋㅋ
Are servo motors built so air tight to maintain the positive position feedback loop required?
I don´t know if I understood you right. You can get servo motor with different IP. The feedback loop ( for example by a resolver) provides the information about rotational speed and the angle of the rotor.
Thanks for the reply, I work with servo motors on injection molding machines and I've noticed they seem to run rather hot even at normal load and also seem to be built rather air tight, external cooling fins instead of any internal air cooling and was just wondering if that's why they need an internal dust free environment for the built in positional feedback loop system.
@@darrylanton9323 Some that are built for continuous operation incorporate separately powered cooling fans. Servos aren't cooled by a shaft-driven fan like typical AC motors because they are used in applications where they run for short duration or at low speeds. They have to dissipate the heat through the case or add external means. If your servo motors get really hot while holding one position, the tuning of the servo drives may be too aggressive.
Yep, I've seen that some of our newer large machines have incorporated blowing fans mounted on the end of the servomotor directing air up the external fins towards the business end. The new hybrid machines that incorporate hydraulic pumps driven by servomotors are more economical then full hydraulic and don't require as precise tuning as full servo electric machines do, luckily these full electric machines have a graph bar (0-100%) that's shows the servomotor load on each of the four variable servomotors that run during the process so adjustments can be made before overloading the motors and shutting the machine down.
@@darrylanton9323 it will be air tight if the output shaft has oil seal.such small opening does nothing to cooling. from the encoder end it must be sealed, because any contamination to encoder harm.
yes i like this channel very much
Thks - Next video is coming soon
Do you know about how implement closed loop program code?
I really like all the detail you put into your animations
thnak you
Great 😍❤️
Aqui no Amazonas Brasil as fábricas usam muito esses sistemas nos robôs obrigado pela legenda
Saudações ao brasil
Why can't we change direction of ac servo motor by swapping the uvw leads. I was told servo motors are same as induction motors with encoder and gear control. Is this true
servo motors and induction motors have one thing in common: the rotating magnetic field. Servo motors have a permanent magnet as rotor and induction motors a "squirrel cage". Inthis vid I explained the RMF:
ua-cam.com/video/vMu6DmfKHTs/v-deo.html
Induction motor with encoder feedback and vfd can be used as servo motor but is not commonly used in servo systems. Permanent magnet motors are best for servo systems because of their high starting torque.
Direction of ac servo can be changed by swapping two leads but no one does that because it is needless. Servo amplifier can do this without swapping any leads. It can do other advanced things like torque, speed and position control
The drive has to be connected according to right turn phase sequence . If not, or one is missing, it gives a fault phase sequence error. The motor has to be connected accordingly ( U,V,W ) The shaft encoder on the motor will detect wrong turning direction. Direction, speed ( = frequency ) ... can be easyly set by parameters. Some drives like Siemens Micromaster can be set using parameters that inputs on the terminal can be used to determine speed and turning direction. It even supplys the 10 V operating voltage conviniently.
Mihajlo Nedeljkovic M21 EIE
which software you used for making 3d animation videos sir 🙏
I use Blender
Hi
I like this
Hello, can I run a servo ac motor with the same program that starts the stepper motor(dir pulse)?
Yes you can drive a servo motor by pulse and direcion signal. Servo motor is widely driven using pulse dir signals. It is called position control mode of a servo motor.
Great demo
💕👍
a la wac bas
can you write your voice for translate to france spanish arabic and all language
I can give you the text in english as a pdf-File. You can help this chanel if you translate he text in your native language. Contact me via e-mail: info@learnchannel-tv.com
ok this is my e-mail mnmostabchir@gmail.com
Tank for This vidio🌄🌍🌌🌳🌧
hi thks
very nice
hi thanks
😎👍
This is feedback controller.
Actually any particular names don"t matter (any servo amplifier has a lot of feedback systems: at least for INSTANTANEOUS current control). For example yaskawa name the controller as servopack(that is their protected trademark). So it can be {servodrive,servopack, servocontroller, servoamplifier, servodriver }...
what does simulation by software? please!
Here Blender is used. But you can also use Maya or Max 3D - for example.
Thank you so much! video so great!
👌
Very useful...clearly explained..
Thank you
Muito bom!
obrigado
A great job. Only can thank you
thanks
Very nice and good information
Thks
Very nice 👍👍👍
thank you
Isso n é motor de passo?
Motor de passo é classificado como motor CC. O motor síncrono trifásico síncrono tem uma tensão de alimentação e controle diferentes.
Mas você também pode usar o motor de passo como um servomotor.
good video Lg
pie kamsutmu
many thanks
Next video is coming soon
Outstanding explanation
Lovelovelove
:-)
👍👍👍
thanks
Very nice
thanks
It is so nice video
Hi -Thank you friend
how do you create such animation.
I used Blender
@@learnchannel-TV I am an electrical engineer student and I want to incorporate animation in my presentation at school. could you recommend a website to get free models.
Make a search with keywords like Blender, car, model and you will get some hints or suggestions for a car modeled with Blender. Some models
@@MrDapo1999 are you presenting Servo motors at your school?
@@onurozdemir2898 I tought electric drives in a technical school
only IRAN
چه خوبه
متشکرم