Candy dissassembly and testing triac error E09
Вставка
- Опубліковано 4 жов 2024
- If you found this video helpful you might like to:
Donate: paypal.me/bootsowen
Support: / bootsowen
www.amazon.co....
You can buy tools and parts, or things you were going to buy anyway from Amazon through the affiliate program (links below) and I may receive a commission for the sale. :
TRIAC: (Check model): amzn.to/3j5qXQ4
Soldering kit: amzn.to/367uGcw
or a multimeter : amzn.to/357iwj7
or you can buy anything else through the link. This has no effect on the price for you. The links used are affiliate links. As an Amazon Associate I earn from qualifying purchases. - Наука та технологія
So useful, thank you so much
great video but E09 seems to be a catch all error, i had one on my vita (twice actually in 2 years) and both times it was the brush contacts for the motor , its really easy to change them the way i ended up doing it
i looked at loads of videos and they all say take the motor out (which basically means take the machine apart) but if you tip the machine on its back the motor is right there and the contacts just unscrew and are easily replaced
hope this helps someone
It sounds like Candy own Hoover and I have a Hoover Washing Machine with an Integrated Dryer and has a Universal Motor controlled via both SCR + Triac.
Yes, they own Hoover
Спасибо за видео Молодец. Очень познавательно !!!
Спасибо!
This candy is from around 2018
It is about 2 years old
Should be about 5-6 years old now… bet you it’s dead now lol
Great video buddy!
the Wifi connectivity is kinda cool, were u can start the phone through a phone etc, and be away from home lol. it is kinda silly cos you think delay timer was invented for same thing, but yeah kinda nice to have updated features
Alot of positive reviews online, and at £250 still not bad if can get fixed.
I wonder if it had its motor replaced not long after use, and maybe triac has failed because of it i dunno, but yeah that triac seemed to be dead, good that the rest of board looks clean and not blow, motor looks good!
Keep it up buddy! ya finding some real gems of machines! the bosch king ;)
These videos are great if peeps complain then just ignore it, there educational and give peeps great advice in how to fix things! loving the content as always!
Toploader smash: Let the Door from The drum Open (where you put your laundry in) and let it spin. It will be nice
i get the error code 9 coming up sometimes i tend to get away with just putting it on a different cycle i guess i will need to get it fixed but i am not paying some engineer to look at it and charge me the earth i might take a look myself looks a bit of a bugger getting the front off though
Hi I have a candy ultra 29 washer that beeps on off position and showing number 8
A repear man to fix eo9 on a candy might cost £125
Where can I purchase motor triac for candy grand vita washing machine gvs169dc3-80.
Ebay, mouser, rs?
My candy has no display and does not run. Kindly advise what could be the issue. Thanks
Start at the start. Is it plugged in? Is the fuse working or blown? Is it switched on? Is the cable damaged? Is the mains suppression capacitor damaged? Work through it to the point where it is broken. I’ll help if I can.
Hi, wondering if you could help out. My hoover was doing exact same as your candy and coming up with E09. Had a guy fit a triac whilst I waited for amazon to post mine. The washer kinda works but only on a 14 min wash. All other cycles stop after 10mins. I have tested resistance on new triacs and they showing 138ohms. The triac fitted to washer is showing 86ohms. Could this be the problem? I've tested the motor and tachometer and it seems fine. Thanks in advance.
I’m not sure that the resistance of a triac means much. I’d try it on a spin cycle. If it can do that it’s probably not the triac
@@bootsowen Thanks for getting back to me. Yes it works on drain and spin at 1400 and does a complete 14min quick wash, but stops after 10 mins in any other cycle. I read somewhere that the triac controls the heater element so maybe this is at fault. Comes up with E08 error now when it stops but I've tested motor and tachometer and they seem fine.
One of the relays will control the heater element
R27 ohm ? please or color? Please ..tnk
Hi do u know that blue varistor information candy wash machine
Where have you get the triac to but / order from
any internet seller
Hola maestro, me pasó lo mismo me tiraba e09 en programa de 14 minutos funcionaba, pero en otros programas fallaba cuando iba a iniciar el ciclo de centrifugado, ahora bien sí pongo el programa solo de centrifugado no falla. Le cambié el triac de motor y funciono correctamente pero a los 15 días comenzó la falla nuevamente. El tacómetro está bien cambié carbones revise las bobinas y está todo ok. Incluso hasta cambié motor ... Cuál será la falla? Lo que si no conseguí el triac original solo un reemplazo. Será esa la falla?
Maybe, or maybe some other little component on the board is damaged. A new PCB might be the answer.
Hola Juan, buenas noches!! Yo cambio el triac, funciona 15/20 días y vuelve a tirar error 9. Lo hice 3 veces, hoy volví a cambiar el triac pensando que iba a volver a funcionar y ya no. No cambie los carbones del motor todavía, esa prueba no la hice. Vos pudiste resolver el problema? Muchas gracias!
Hi nice video. I am getting an e20 error on a Hoover Wdxoa 485acb 80. The pump is pumping and the lines are all clear. Any idea?
I can find very little info. The only thing people talk about is an obstruction but that definitely is not the case.
Hi, what does the e20 error code mean?
@@bootsowen Blockage in drainage system or pump.
Yes, I am all out of ideas so! SO is it actually draining out of the machine properly?
@@bootsowen When I start a cycle it does the full drain of water in the machine. The pump and drain seem fine.
Hello mate did repairing the triac work as I'm having er09, when the drum goes sounds like it's gonna take off with a bad scratching sound
Yes, have a look at my other videos on this model. it is one of the best fundamental repairs I have had success with.
My candy doesn't spin. It says error E08. I checked motor brushes,tachometer sensor and triac and are ok. What can I check?
Have you looked up what error E08 means?
Where do you buy the parts? I need to fix a Candy Alisse go 485 machine. The panel wont light up at all so i followed the wiring to the board and it was a bit black on the board at connection. Any help greatly appreciated
I buy them wherever they are cheapest
amazon have none in stock at moment will look elswhere how much did u pay for it please?..did u get the machine fixed?would like to see the follow up vid if u made one
I paid about £4 for 2. You can get them on ebay, check the number on the triac and order a direct replacement and some heat transfer paste. I have posted a how to in another video. However, if your machine is working on some cycles then the symptoms are different and changing the triac shouldn't fix the problem. Have you googled the other causes of the e09 error? could it be the motor brushes?
@@bootsowen thanks for that yes you could be correct i asked a pal of mine an ex washer repair man he said prob the brushes thanks for your help
Are you aware of a company called ‘Readly’ using your content all over Facebook to sell there marketing.... they are using your video of a washing machine on a trampoline with no credit to you.
Nope, but thanks.
can you explain each relay to motor each relay to heater and so on
explain circuit diagrame
I have done this in another video, It was on a hotpoint, wma50 maybe? Have a search. I talked through how the relays work and how they reverse direction. let me know if you need more.
Проблема в плате?
washing machines tht are candy or hoover
Too long story fuck I ll pay new