Texas Star Killer Bee DX 250 HDV Repair For HOBO

Поділитися
Вставка
  • Опубліковано 25 сер 2024
  • Lets get this Killer Bee Fixed for HOBO and back working 💪
    👇 If you have gained anything from Gatekeepers Videos, PLEASE READ 👇
    Did you know that you could easily support Mr. Gatekeeper and his videos? I'm not asking for charity or help, but if you've been positively impacted by my videos and would like to give back, you can do so here at the link below. Your contribution will go towards new equipment or anything related to making my videos better for you the viewer. Thank you for considering supporting Gatekeeper. Click the link below to buy me a coffee:
    www.buymeacoff...

КОМЕНТАРІ • 22

  • @jeremyshiver6055
    @jeremyshiver6055 Рік тому +2

    From Alabama

  • @nightlife7231
    @nightlife7231 Рік тому +1

    I always heard the killer bee 🐝 are very good amps

  • @jethrobodine9617
    @jethrobodine9617 Рік тому +1

    1447 layin up a holla at the Gatekeepa, 73rds and kudos out to ya brotha...
    1447 back quiet...

    • @1883GotDown
      @1883GotDown  Рік тому +2

      Da big big big future hammer killa with 64 inch biceps 💪 waving

  • @jlyle51
    @jlyle51 Рік тому

    That would drive my texas star 16 pill just fine. Hello Gatekeeper ! Crunch lake Tyler Texas.

  • @robertmeyer4744
    @robertmeyer4744 Рік тому

    This is the one I got in a trade working . righting rub off buttons . do light up. the output was a little low . like 205 RMS with 4 in. I played with the tune got it a tad better. took the pot out to fix a outher amp and later got a ICA pot in it. I did power wire to 10 AWG OFC right to transformer. Anderson SB 50. came up to clean 225W . left it. been in a box for years now. them SAE connectors like that polarity can reverse. Anderson does not do that . get them right from start. them SAE have a voltage drop under load over 20 amps. my wire gauge showed the OEM fuse holder at 12 AWG . the one with yellow wire. I got true Busmen 10 AWG comes with red wire that is thicker. I bypass fuse on mine, it's one the outher side of SB 50 connector buy the pos ring terminal. I wont run with no fuse. I just move it with a better one buy the battery or PS . 73's

  • @vnonkwinn6233
    @vnonkwinn6233 Рік тому +2

    Y,all sound country as hell

    • @1883GotDown
      @1883GotDown  Рік тому +1

      Cause we be country homie

    • @randyguay7115
      @randyguay7115 Місяць тому

      This is the south...
      Fo sure.
      Im as far south in georgia as you can go.
      199floridageorgialine

  • @josediaz-tq5cz
    @josediaz-tq5cz Рік тому +1

    Big Daddy, any word on the pre-amps?

    • @1883GotDown
      @1883GotDown  Рік тому +1

      Playing waiting game with you...if its to much longer imma just do the hard Gerber work my welf

  • @randyguay7115
    @randyguay7115 Місяць тому +1

    Why no power wire upgrade.
    I did mine and at 15.5 it hits 320 350.
    Its a little bad a$$
    The transistors dont worry me its all the other stuff.

    • @1883GotDown
      @1883GotDown  26 днів тому +1

      If there wasn't one on this he wouldn't let me cause I insist man and most people say yes

  • @parkerriverrat1
    @parkerriverrat1 Рік тому +1

    cool video. I have a killer bee, its in great shape. It has 2290's in it. What is the reason for the big electrolytic cap on the positive rail? Mine has a 47uf 16V cap there. Thanks.

    • @1883GotDown
      @1883GotDown  Рік тому +2

      It just helps with filtering...as in any dirty voltag from an alternator it will filter out a freq range so it is mainly for your radio and signal to help keep it clean.

    • @parkerriverrat1
      @parkerriverrat1 Рік тому

      @@1883GotDown thanks what value is good to use for that

  • @roberthicks7761
    @roberthicks7761 Рік тому +1

    Do they still make a 250

    • @1883GotDown
      @1883GotDown  Рік тому +1

      Good ? I havent seen one honestly