So glad to see you uploading more. I build industrial robots and cnc machines for Lasers, plasma cutters and routers so this channel gives me lots of ideas for side projects
Hey, not looking for a new job but curious about yours I do field service and programming etc I guess big question is expected pay and need for workers And what programming languages dominate your field
Your stuff really is amazing. After all your research in actuators, the fruits of your labor are more visible than ever! Thank you for bridging the gap between DIY makers and the world of industrial robotics, you've made some amazing contributions, but this is in my eyes the most incredible one yet!
@@Skyentific I've been following your channel from the early beginning! Fascinating! Continue the good work, too bad I don't have the budget, but your drives are looking very promising.
I am very glad that you have developed your own actuator. Please tell us more about the development process, components, mechanical processing of elements, electronics, what difficulties there were and how you overcame them. Good luck with your projects.
@@PiefacePete46 I agree with you. I've been watching this channel for years and I like it. But this particular video made me angry and I couldn't resist commenting. I've changed my comment. Thank you for your constructive criticism.
@@sergeyworm1476 : I have just deleted my reply. I intended to delete it when you edited yours, as it no longer made sense.... We had to leave home unexpectedly when an elderly relative became ill. (She's OK now). Cheers.
Well done. I have been following you for a very long time since you started out. The actuators are great. I would like to buy unfortunately where I stay our currency is 18:1 so $1000 is too expensive for us. Keep up the good work and when you are very successful then you can donate one or two actuators 😊 Love your work.
I've gone through a similar evolution. Too many of the drivers are dreadful even when the motor hardware is good. In my case I've ended up using a VESC to control the motor with a magnetic position encoder - similar to all the Chinese (and American) drivers. The difference however is the PC Software to set it up (the VESCTool) which is amazing! It has a beautiful UI with auto-tuning for PIDs and a host of other features never found on other controllers such as being able to run using an RC Servo input. Best of all, you don't need Linux or Python! VESC just makes everything easy - without any loss of functionality. It's also open source.
This is great! I'm curious if the harmonic or quasi-direct drive component will be replaceable or repairable or open-sourced? I can easily imagine building a project with these actuators and inadvertently exceeding the recommended torque and bunging up the drive. If I fry the moteus board, I can imagine replacing that, say, but if the drive fails, can I replace it or do I have to replace the entire (not cheap) actuator? I guess I'm anticipating a market opportunity for your hobby/professional actuators: be more modular and fixable (less black box) than the next guy. That hands-on interactivity has always been your brand. Cheers!
Do any of the new servos have built in braking mechanisms? So when shut down they are safely locked from rotation. I wish there was more details on the details of these actuators, like is there torque sensing? Built in trajectory handling? Temperature sensing? Load/AMP sensing? What API features are there? It seems like such limited information for $1000 servo/actuators.
I wish Skyentific the best with these, however, they are fairly expensive for most hobby projects. Anyone who wants a lower cost option, for some applications, it's worth looking at e-bike direct drive hub motors. A typical 250W motor will deliver 20 to 40Nm Torque. A 1kW motor 60-80Nm. They require some inventiveness to add a magnetic encoder. Control with a VESC and you can achieve accurate positional control. I have a cheapo, second hand 750W hub motor motor which delivers 40Nm and will run up to 400rpm. They are not as efficient at low speed compared to geared motors - but IMHO, the performance envelope is better than any of the actuators I've tested. Not suitable for every application - but ideal for some!
Interesting! As with steppers, the more time passes, the greater the number of choices that will be available at manageable prices. I see people finding use for scrapped "Hoverboard" motors as well. I was fortunate to score a great selection of steppers, from NEMA 23 down. They came from high-end copying machines with big document collating trays.
I'm curious what your thoughts are on using the Moteus controller boards; I know from back in the day you reviewed the different options; could you share how you landed on Moteus controllers. if there are still tradeoffs with that choice. I would love to hear some of your thoughts, if you covered this in a previous video please just link it to me I don't mean to have you need to repeat yourself.
These are competitive with the market at ~$1000 each? I can understand paying for an ecosystem and your vision of the future, but until you compare them side by side with commercially available options, I'm highly skeptical they're a value for your audience
It looks like your using moteus or at least a compatible commands CAN with it and CAN-FD which is nice. One thing you might want to look into is optional support for use with the duet control boards as they also have CAN-FD outputs but I'm guessing the protocol they use might be different
How do we actually get the software together where we can build a robot that can be trained with a teach pendant or Cobot style where we can move it around to program it? Actuators and 3d printed parts are all well and good but without the software to build actual useful industrial automation machines these just end up as toys and novelties for the vast majority of people
"Not very high price"..... at $1000 to $1500 per actuator that is not inexpensive. I suppose it depends on what Multi Thousand dollar machine you use them on....
Great job! Are those actuators compatible with your latest robot arm design? Are you considering making a commercial robot arm? I love those actuators, but the price is high for me; I'm sure it's a fair price, but I'm not rich. :-) Are there any discounts for buying several, or special offers for Black Friday or Christmas?
its funny that i Just got a 2016 Nvidia Drive PX2 and they Said it can be repurpose for other Projects i remembered Iron Man Robot Name Dum-E and you Popped up in my Feed LOL here the Kicker i Paid $20 USD and Powers on Bad News Im still Novice Im not or have in Tier 6 DIY & Tools im in Tier 3 with Tier 1 Tools you in other hand your Maxed Tier 6 DIY & Tools
So glad to see you uploading more. I build industrial robots and cnc machines for Lasers, plasma cutters and routers so this channel gives me lots of ideas for side projects
Thank you a lot for such kind comment! It really helps!
Hey, not looking for a new job but curious about yours
I do field service and programming etc
I guess big question is expected pay and need for workers
And what programming
languages dominate your field
Your stuff really is amazing. After all your research in actuators, the fruits of your labor are more visible than ever! Thank you for bridging the gap between DIY makers and the world of industrial robotics, you've made some amazing contributions, but this is in my eyes the most incredible one yet!
hope sales go well!
Thanks for your videos. I am very happy to see that you start to release your own actuators. Wish you all the best!!
Amazing and very impressive! Well done, great products!
Thank you for the support and for watching my videos!
@@Skyentific I've been following your channel from the early beginning! Fascinating! Continue the good work, too bad I don't have the budget, but your drives are looking very promising.
Good work, well explained👍🏻. Been watching your stuff for years👀. Just commenting to help the algorithm😃.
I am very glad that you have developed your own actuator.
Please tell us more about the development process, components, mechanical processing of elements, electronics, what difficulties there were and how you overcame them. Good luck with your projects.
@@PiefacePete46 I agree with you. I've been watching this channel for years and I like it. But this particular video made me angry and I couldn't resist commenting. I've changed my comment.
Thank you for your constructive criticism.
@@sergeyworm1476 : I have just deleted my reply. I intended to delete it when you edited yours, as it no longer made sense.... We had to leave home unexpectedly when an elderly relative became ill. (She's OK now).
Cheers.
Congratulation for your new business. Your videos are amazing, I learned a lot from you.
You are a good teacher. I learned a lot from you
Glad to hear that. Thank you!
Congratulations 👍🏽 amazing hardware . I’m definitely purchasing a few !
Awesome! Thank you!
Yes! I figured you had something amazing in the works ...😎
Yes!
Congrats on launching a store and selling actuators!
Good job! Congratulations!
Sweet! Looks like an awesome actuator.
Thank you for supporting me!
Can't wait to see some a robot powered by this puppies. Quite small too!
Thank you ( i comment before watching video )😊
Thank you a lot!
Well done. I have been following you for a very long time since you started out. The actuators are great. I would like to buy unfortunately where I stay our currency is 18:1 so $1000 is too expensive for us. Keep up the good work and when you are very successful then you can donate one or two actuators 😊 Love your work.
I've gone through a similar evolution. Too many of the drivers are dreadful even when the motor hardware is good.
In my case I've ended up using a VESC to control the motor with a magnetic position encoder - similar to all the Chinese (and American) drivers.
The difference however is the PC Software to set it up (the VESCTool) which is amazing! It has a beautiful UI with auto-tuning for PIDs and a host of other features never found on other controllers such as being able to run using an RC Servo input. Best of all, you don't need Linux or Python!
VESC just makes everything easy - without any loss of functionality. It's also open source.
Well done sky!
This is great! I'm curious if the harmonic or quasi-direct drive component will be replaceable or repairable or open-sourced? I can easily imagine building a project with these actuators and inadvertently exceeding the recommended torque and bunging up the drive. If I fry the moteus board, I can imagine replacing that, say, but if the drive fails, can I replace it or do I have to replace the entire (not cheap) actuator? I guess I'm anticipating a market opportunity for your hobby/professional actuators: be more modular and fixable (less black box) than the next guy. That hands-on interactivity has always been your brand. Cheers!
Amazing stuff.
Thank you a lot!
You should consider relasing the quasi-direct drive actuators planetary gear box as a separate product so people can use it with other motors.
Very interesting
Thank you a lot!
Nice work, but can you design ones that have a hollow shaft to pass wires through.
Do any of the new servos have built in braking mechanisms? So when shut down they are safely locked from rotation. I wish there was more details on the details of these actuators, like is there torque sensing? Built in trajectory handling? Temperature sensing? Load/AMP sensing? What API features are there? It seems like such limited information for $1000 servo/actuators.
I wish Skyentific the best with these, however, they are fairly expensive for most hobby projects. Anyone who wants a lower cost option, for some applications, it's worth looking at e-bike direct drive hub motors. A typical 250W motor will deliver 20 to 40Nm Torque. A 1kW motor 60-80Nm.
They require some inventiveness to add a magnetic encoder. Control with a VESC and you can achieve accurate positional control.
I have a cheapo, second hand 750W hub motor motor which delivers 40Nm and will run up to 400rpm. They are not as efficient at low speed compared to geared motors - but IMHO, the performance envelope is better than any of the actuators I've tested. Not suitable for every application - but ideal for some!
Interesting! As with steppers, the more time passes, the greater the number of choices that will be available at manageable prices. I see people finding use for scrapped "Hoverboard" motors as well. I was fortunate to score a great selection of steppers, from NEMA 23 down. They came from high-end copying machines with big document collating trays.
a comment!
*i am still here, liking and comenting ;)
I'm curious what your thoughts are on using the Moteus controller boards; I know from back in the day you reviewed the different options; could you share how you landed on Moteus controllers. if there are still tradeoffs with that choice. I would love to hear some of your thoughts, if you covered this in a previous video please just link it to me I don't mean to have you need to repeat yourself.
I want to see a 6DoF robot arm built with these. When do you think you'll be taking that build on?!
nice!!
Thanks!!
These are competitive with the market at ~$1000 each? I can understand paying for an ecosystem and your vision of the future, but until you compare them side by side with commercially available options, I'm highly skeptical they're a value for your audience
It looks like your using moteus or at least a compatible commands CAN with it and CAN-FD which is nice.
One thing you might want to look into is optional support for use with the duet control boards as they also have CAN-FD outputs but I'm guessing the protocol they use might be different
How do we actually get the software together where we can build a robot that can be trained with a teach pendant or Cobot style where we can move it around to program it? Actuators and 3d printed parts are all well and good but without the software to build actual useful industrial automation machines these just end up as toys and novelties for the vast majority of people
damn, wish u posted bout this earlier :(
beautiful!!!!
"Not very high price"..... at $1000 to $1500 per actuator that is not inexpensive. I suppose it depends on what Multi Thousand dollar machine you use them on....
Typically the market dictates price. Usually similar products of equivalent quality and availability set pricing limits.
Great job! Are those actuators compatible with your latest robot arm design? Are you considering making a commercial robot arm? I love those actuators, but the price is high for me; I'm sure it's a fair price, but I'm not rich. :-) Are there any discounts for buying several, or special offers for Black Friday or Christmas?
Do them PnP in 3 or 4 sizes, like those plastic pipeline connectors.
I developing it right now. I almost finalised the design. So it will be available soon! :)
🤖🤖🤖Amazing! 🤖🤖🤖
Thank you a lot!
Ну как не послушать прекрасный русский акцент - главное что даже без перевода понятно все 😊
good!!!!
^0^ amazing
ничего себе как выросли до продажи брендовых движков. как получить один в рф для теста?
Почему мне кажется что у автора русский акцент... особенно после: уан, ту, сри 😅
Почему у вас нет видео на русском?
its funny that i Just got a 2016 Nvidia Drive PX2 and they Said it can be repurpose for other Projects i remembered Iron Man Robot Name Dum-E and you Popped up in my Feed LOL here the Kicker i Paid $20 USD and Powers on Bad News Im still Novice Im not or have in Tier 6 DIY & Tools im in Tier 3 with Tier 1 Tools you in other hand your Maxed Tier 6 DIY & Tools