T H A N K Y O U F O R W A T C H I N G ! P L E A S E L I K E A N D S U B S C R I B E ! 🔵 My Discord: discord.gg/YAuGm5j ✅ Merchandise teespring.com/en-GB/stores/britec-store
all i get is "system error 6118 has occured, the list of servers for this work group is currently not available" ran it in admin and i am sole admin user on my home network
Thank you for the effective video you uploaded. I appreciate your sharing your knowledge with us people on earth and without paying for it (which is not obvious). So I subscribe to your channel and recommend others to join thanks again.
@@Britec09 Good ! I guess the general public is just hearing about this in a wide spread manner . As the drop started last year March . You are on top of the tech as always :) 👍
arp -a only shows the arp table. So if your computer hasn't comunicated with a device in your network it wont have the Mac or IP Adress. So it shouldnt show all the Devices in your Network. The Nirsoft Tool is quite usfull though, and after using it arp -a should work i think. A easier way would be accessing your router. Most of the routers i am familiar with can list the used ip adresses
Thanks for showing these nice network viewers. I used the arp -a command and among the IP and MAC addresses shown for the various devices, ff-ff-ff-ff-ff-ff (broadcast frame) is shown. What does this mean? The device of which I want to check its MAC address still has no IP stack loaded, so no IP address I assume. Should its MACaddress be shown in the result for arp -a? If not, how can I force it to show its MAC address? I will also try the Advance IP scanner program, but expect to find the same result as with the arp - a command.
Can you help me please. I want to change my ssid/wifi name and I have about 27 different things connected to that name. Is there an easier way I can change the one that program you mentioned to the new ssid witch it will go off line until I have all them changed then I’ll go into my router and change my ssid. instead of resetting all my devices and re-hook them all back up. Thank you!!!
Can you do this to a remote router? The scenario is as follows. I have access to the router but the router has 2 devices connected via LAN and are set to DHCP and what I need is to get the IP those 2 devices are pulling from the router. Is there a way to access this information remotly? Having access to said router.
@@TheOnlineMarket On the routers we use yes. You have to go to the DHCP options. It's different in every GUI but there is a table that shows what devices are connected. It should show MAC and the IP assigned. Hope it helps!
I am getting: System error 6118 has occurred. The list of servers for this workgroup is not currently available Why do you people only do videos about the straight-forward case? You don't mention possible issues.
i need help i have my internet at home but its too low to download movies ..but i find a way to get my neighbours wifi p.w .... but i dont want to use it when they r using it too..is there a way to know if they r using it?? so i can disconnect ..plz helpp!!!
I have spent the last 24hrs trying to connect a new HP deskjet wifi printer to my laptop, I have it connected to my smart phone, but it will not install onto my laptop, it's driving me nuts!
hi brother i have a question.... i have shared my internet via LAN he have connected another router with the LAN, how will i check if he have further shared the internet through that rounter?
Because when I see a stalker sitting out there I unplug the modem. 6 people leave at the same time. I only have ip numbers. And I have one outstanding Mac number. It shows up blank every place I go on the lookup sites.
What does it mean when I click on explore and it says "Could not establish connection to the remote host *ip address*"? Why is this? Also nothing shows up for Manufacturer
I am so sorry I donot know is Wireless Network Watcher is safe or not as I tried to scan the program file on virus total it gave me three viruses instead the program URL address is safe on virus total What's your opinion, please?
Windows error 6118 typically occurs in a network environment when a computer can't find the other computers on the network. It's often associated with issues in NetBIOS over TCP/IP. To resolve it, you might need to check your network settings, ensure proper sharing is enabled, and troubleshoot any connectivity issues.
any idea how to stop my neighbours phone showing in my network on my PC? it is not showing on my router so has no IP address assigned, i have tried renaming my router, hiding my SSID, changing password etc but there it is, always showing in my network, i can see it is a Motorola C but that is it.
T H A N K Y O U F O R W A T C H I N G !
P L E A S E L I K E A N D S U B S C R I B E !
🔵 My Discord: discord.gg/YAuGm5j
✅ Merchandise teespring.com/en-GB/stores/britec-store
error for me too, not sure if its a windows bug
Thank You, "Advance IP Scanner" really Works! I was trying to find my raspberry pi and it found it's IP address. Thanks again. Really useful tool.
awsome video showed exactly what I needed, maybe add the fact you can also check the ip in the title
Another useful video Brian. A BIG 👍 from me!
You're welcome Steve
Cheers Brian another helpful and useful video thanks.....I've had that desk top pic as well ;-). Don
You're welcome mate.
jezz people its desktop not desk top
all i get is "system error 6118 has occured,
the list of servers for this work group is currently not available"
ran it in admin and i am sole admin user on my home network
Thank you for the effective video you uploaded.
I appreciate your sharing your knowledge with us people on earth and without paying for it (which is not obvious).
So I subscribe to your channel and recommend others to join
thanks again.
Thanks Brian.I love these software tool videos. Thankyou
Glad you enjoy them.
Thanks for the video. When I entered net view I got the message that this service has not been started.
Love from India ♥️
Hi there, thankyou for your useful tutorial video. Keep it up
thanks
Guess with Windows dropping "Home Group" you'll have another education vid coming out ?
Already done that video :)
@@Britec09 Good ! I guess the general public is just hearing about this in a wide spread manner . As the drop started last year March . You are on top of the tech as always :) 👍
Can I use it to storage other files like images and videos the same time with the ISO?
Thanks and Cheers!☺
Any possibility of reviewing Angry IP Scanner?
I can do that for you :)
@@Britec09 Thanks. Would be nice to have a comparison / contrast between them. Cheers!☺
⚽
Thank you so much all the way from Cape Town south Africa
arp -a only shows the arp table. So if your computer hasn't comunicated with a device in your network it wont have the Mac or IP Adress. So it shouldnt show all the Devices in your Network. The Nirsoft Tool is quite usfull though, and after using it arp -a should work i think. A easier way would be accessing your router. Most of the routers i am familiar with can list the used ip adresses
Thank you sir! Great video :D
oh dam, an actual useful command
Barakallah thx sir
Thank you, it is helpful
Thanks for showing these nice network viewers. I used the arp -a command and among the IP and MAC addresses shown for the various devices, ff-ff-ff-ff-ff-ff (broadcast frame) is shown. What does this mean?
The device of which I want to check its MAC address still has no IP stack loaded, so no IP address I assume. Should its MACaddress be shown in the result for arp -a?
If not, how can I force it to show its MAC address?
I will also try the Advance IP scanner program, but expect to find the same result as with the arp - a command.
Can you help me please.
I want to change my ssid/wifi name and I have about 27 different things connected to that name.
Is there an easier way I can change the one that program you mentioned to the new ssid witch it will go off line until I have all them changed then I’ll go into my router and change my ssid. instead of resetting all my devices and re-hook them all back up. Thank you!!!
Can you do this to a remote router? The scenario is as follows. I have access to the router but the router has 2 devices connected via LAN and are set to DHCP and what I need is to get the IP those 2 devices are pulling from the router. Is there a way to access this information remotly? Having access to said router.
@@TheOnlineMarket On the routers we use yes. You have to go to the DHCP options. It's different in every GUI but there is a table that shows what devices are connected. It should show MAC and the IP assigned. Hope it helps!
quick and precise explanations. thank you and cheers !
Very helpful information. thank you.
You're welcome
Excellent video .
Very helpful information.Thank you so much.
Can you do this on a phone or is it just a laptop or pc??
When I do a " ping -a (IP address)",
The ping is successful but it doesn't give me the name like yours did. It just shows the ip address.
thanks for your IP address! i will now commit /f to your computer
💀💀💀
Valuable information... Thank you ♥️
Anything about finding out a device’s port number? I noticed some had three, four or five numbers so I was a little confused.
The list of servers for this workgroup is not currently available
My crush : see me Testing this shit
Me : Become hacker man
reminder
really nice work
:)
Thank you! Very useful.
Thank You .
I am getting: System error 6118 has occurred.
The list of servers for this workgroup is not currently available
Why do you people only do videos about the straight-forward case? You don't mention possible issues.
thank you 😃
i need help i have my internet at home but its too low to download movies ..but i find a way to get my neighbours wifi p.w .... but i dont want to use it when they r using it too..is there a way to know if they r using it?? so i can disconnect ..plz helpp!!!
helpful information. thank you
I have spent the last 24hrs trying to connect a new HP deskjet wifi printer to my laptop, I have it connected to my smart phone, but it will not install onto my laptop, it's driving me nuts!
what does "266" unknown mean. Its at the bottom of the app(Advanced IP scanner), you will see e.g. 4 alive and 0 dead and e.g 250 unknown?
hi brother i have a question....
i have shared my internet via LAN
he have connected another router with the LAN, how will i check if he have further shared the internet through that rounter?
Yes I am late but why does his voice sound as Jim browning? Is he actually him?
can i watch static ip adress of those who are using my wifi? and can i still block them using there static ip adress ?
what if it says network connection can't be reached?
mine says the list for the current work group is unavailable when i type in net view in cmd
cd u do a vid on Networking concepts an Ethical hacker needs to know, thanks
Because when I see a stalker sitting out there I unplug the modem. 6 people leave at the same time. I only have ip numbers. And I have one outstanding Mac number. It shows up blank every place I go on the lookup sites.
Amazing English)))
What does it mean when I click on explore and it says "Could not establish connection to the remote host *ip address*"? Why is this? Also nothing shows up for Manufacturer
How can i change my computers name on the network? So instead of my computer showing "DESKTOP-XXXXXXX" i can change it to whatever i want.
the best.
What does it mean when i ping on cmd prompt and it says request timed out? Packets send 4, Received 0
I am so sorry I donot know is Wireless Network Watcher is safe or not as I tried to scan the program file on virus total it gave me three viruses instead the program URL address is safe on virus total What's your opinion, please?
I have this code ESP_30E0CC connected into my internet router, could you please help me what is this code and what device in particular, thank you
it says for me not available
Hi Brian
When I did this I got-
C:\WINDOWS\system32>net view
System error 6118 has occurred.
Me too.
me too
Me too as well, even ran as Adrmin--still same error @@univuniveral9713
System error 6118 has occurred.
The list of servers for this workgroup is not currently available
doesnt work
hmm i know you, you have a big channel but i forgot the name of it
T H A N K Y O U !
I enabled computer hotspot...by netsh wlan start hostednetwok...
How to check devices connected to my hotspot?
Did not work,got an error saying this action requires a SMB1 protocol which is unsafe so it wouldn't show me anything.
GREAT! How to block mac address from accessing our local network? Please...
i need help..i changed to connect only my phone on the wifi and now i hotspot my pc to change it butg i cant log into my ip....any help??
mine access is denied. can i know why
run as admin
When I type in net view it just says system error 6118 has occurred
Windows error 6118 typically occurs in a network environment when a computer can't find the other computers on the network. It's often associated with issues in NetBIOS over TCP/IP. To resolve it, you might need to check your network settings, ensure proper sharing is enabled, and troubleshoot any connectivity issues.
Does not show the IP of my iPhone connected to the same local router
If I'm getting multicast IPS is there someone on my network
Can you please show me proof my stuff won’t get stolen if i choose this stuff?
How to know how much data is used by each of the devices connected to my wifi router
The name and manufacturer isnt picking up for advanced ip scanner
I am literally getting ddosed rn and I cant figure out how or why and my system 32 access is blocked
You don't need the -a on pings...
Thank you +1
Go down to the search box, where?
Njan malayali
can i now which devices are on to near me and devices i p address plz help me
DOE NOT WORK 8.1 PRO why did you not say that this works only in 10 in your title??
What about android devices?
" the list of servers for this workgroup is unavailible " :(
Yeah, that's what I got, too.
@Tyrion Lannister I googled it. Apparently it means that your firewall is working. So, that's good news.
System error 6118 has occurred. it show to me
any idea how to stop my neighbours phone showing in my network on my PC? it is not showing on my router so has no IP address assigned, i have tried renaming my router, hiding my SSID, changing password etc but there it is, always showing in my network, i can see it is a Motorola C but that is it.
my neighbours phone does that as well lol
@@Britec09 annoying isn't it
Such tiny writing - can't view even after expanding size and with magnifying glass! Modern times! 😖
I cant type
why am i getting error 668 or something
Error : 6118
System error 64
a
Hi Brian how are you today
You have sent a private message on Twitter
I hope you look at it and find me the solution
Thank you
Yoooo
it couldn't find my stuff, error or something 123
doesn't do shit mate...
can i now which devices are on to near me and devices i p address plz help me
can i now which devices are on to near me and devices i p address plz help me
can i now which devices are on to near me and devices i p address plz help me
can i now which devices are on to near me and devices i p address plz help me
can i now which devices are on to near me and devices i p address plz help me