Man your course is holding up great even after all this time. Nice! You were my inspiration to finally build mine. Can I say "You were the wind beneath my wings". OK too much I get it. Great video as always brother!
Beautiful build bro can’t wait to start upgrading my bronco this is definitely the cleanest bronco build I’ve seen! Simple but performs amazing. All I own is GM vehicles but I had to get the bronco for my first build
I fell asleep on the couch so here I am, super early. It was a huge difference after the mods. Only 2 things I would consider changing for your course. Front bumper and spare tire delete. I would say that everything else is must have for performance. I sure do like the new electronics, way smoother now
Yeah the front bumper delete has me torn, I like the way it looks with it on but I like the way it preforms with it off. The rear tire is staying on though, the rack is part of the hinge body mount so if I want to remove it I will need to cut it off and then I’m committed to having it removed permanently, plus it leaves a huge hole in the back. :/
@@DoubleADay How many did u buy? I’m at 2 C10’s, Gladiator and a silver Bronco Convertible. New gen 2 electronics r smooth but fail. Controllers r on back order for 2 months. Gladiator worked for 1 week. Bronco for 1 month. Changed to gen 1 esc and controller for $65.
I’ve got an scx24 Axial Betty with.. Treal wheels and wheel weights, steer cups, axle housings and diff covers, skid plate, high clearance links from the gladiator, steer links, rock sliders, full transmission, front overdrive worm gear… also Injora 43mm shocks and an Injora .050 50t pro… topped off with a custom fit all metal Savox sh-0254… running the Little Guy Racing M/T trail kings for tires… this a heavy car and it’s all below the frame for insane balance and traction. The over sized motor provides more than enough Torque and speed to move this car as well…
Best looking modded Bronco that I've seen thus far! This video convinced me that it can be a competent crawler after all, so I think I'll pick one up 🤘
I just got the bronco too; same color and I put the same stickers as well as removed the axial logo. So far I’ve only installed brass diff covers and brass wheel hexes that add 1mm in width. Just with those upgrades and removal of the back tire makes a big difference in performance.
Very awesome! I have done quite a few of these upgrades to my Jeep but I am waiting to do a few more like the axels. I want to get the proline Chevy step side body. I love the Treal products! Now I used the Prolone Hyrax tires with my Treal 20g wheels.
Bro I just ordered the blue one and some blue brass....lol I also got some rock creepers I'm gonna put on it.....as you I love the creepers...I'ma keep mine looking pretty instead of a performer...lol love the videos man always man keep them coming man
Truck looks great. Nice video. Your mini crawler course is dope. Damn, I never thought I'd want a 1/24 but these little Broncos have me making an Amain wishlist. That rear tire looks so good but performs so bad. Maybe have to put a massive bull bar out front to balance it.
Mine came with some dark orange paint splotches on top, but I was able to scrape it away with my fingernail and it was fine underneath. I wonder if the black is the same kind of paint mistake and could be easily removed like mine.
Hey man great video! I just bought this about an about an hour ago and I’m running into the same problem. Do you happen to have a parts list or a link to the website you used?
@@UpperLeftRC that's awsome. I'm working on one myself👍 you should do some videos of the construction process people eat that $hit up.... by ppl I mean me🤣🇨🇦
When my battery is really low, my truck drives in reverse by itself lol. When i charge it, it goes away completley.. its pretty modified but still has stock esc, motor , and servo for now. Any idea? It weighs 14g so quite a bit heavier than stock
Glad you enjoy the content! I don’t know if any clubs around here, just my local hobby shop in Chehalis WA. They have a small indoor crawling course 👍🏻
I had a hard time finding springs that would balance between correctly, the rig was so heavy that they either collapsed under the weight and had no suspension or where so stiff it would barely flex, so I choose the super stiff option but I’ll work on tweaking them, the total was over $500 I think, it’s been a while but it was a lot and not worth it at all lol
Ahhhh! Well I think I watched this a day too late. I debated on the rock creeper. But ended up getting the rc4wd wrangler mtr. And treal wheels aluminum brass combo. Hope it works out!!
Hey man I’m thinking about getting this, how much would the total cost be for everything you put on it including the truck, and I am new to rc cars but I was wondering what upgraded motor can I put in this without modifying the body?
Really like what you have been doing there - is there a list somewhere showing what parts you have been using ? And if you dont mind telling what have you spend on that build - i am new to the crawler hobby and i got no clue how much cash you invested there :-P Keep up the good work
Man your course is holding up great even after all this time. Nice! You were my inspiration to finally build mine. Can I say "You were the wind beneath my wings". OK too much I get it. Great video as always brother!
I’ll be the wind beneath your wings any time! Lol 😂👍🏻
Glad I caught some of this live, truck looks great. I'm still debating on getting one. Ford is a 4 letter word in my house.
😆 we are a Chevy family over here but I had to grab the grey bronco with the hard body. It's pretty sweet.
Great rigs. Did mine up 2nd day now rime 4 upgrad servo..stop in thank u..just did a tank videos 2✌
@@vbspeed7571 check out ccxrc, mofo rc and tinker time rc body kits and parts for these as well.
Beautiful build bro can’t wait to start upgrading my bronco this is definitely the cleanest bronco build I’ve seen! Simple but performs amazing. All I own is GM vehicles but I had to get the bronco for my first build
Thank you, yeah the Bronco was a fun build and im sure you’ll enjoy the upgrading process 😄👍🏻
I fell asleep on the couch so here I am, super early. It was a huge difference after the mods. Only 2 things I would consider changing for your course. Front bumper and spare tire delete. I would say that everything else is must have for performance. I sure do like the new electronics, way smoother now
Yeah the front bumper delete has me torn, I like the way it looks with it on but I like the way it preforms with it off. The rear tire is staying on though, the rack is part of the hinge body mount so if I want to remove it I will need to cut it off and then I’m committed to having it removed permanently, plus it leaves a huge hole in the back. :/
Hopefully someone comes up with something to fill the hole. Do I need to get a Bronco scx24?
@@DoubleADay How many did u buy? I’m at 2 C10’s, Gladiator and a silver Bronco Convertible. New gen 2 electronics r smooth but fail. Controllers r on back order for 2 months. Gladiator worked for 1 week. Bronco for 1 month. Changed to gen 1 esc and controller for $65.
I’ve got an scx24 Axial Betty with.. Treal wheels and wheel weights, steer cups, axle housings and diff covers, skid plate, high clearance links from the gladiator, steer links, rock sliders, full transmission, front overdrive worm gear… also Injora 43mm shocks and an Injora .050 50t pro… topped off with a custom fit all metal Savox sh-0254… running the Little Guy Racing M/T trail kings for tires… this a heavy car and it’s all below the frame for insane balance and traction. The over sized motor provides more than enough Torque and speed to move this car as well…
awesome video. I just bought my bronco and need to get it ready for comps. Very helpful thank you.
😄👍🏻
That thing is badass dude!! Definitely gonna have to give my bronco some help in the future! Sweet video!
🤘🏼😎
That’s a stout little bronco now. Great video!
Heck yeah! 🤘🏼😄
nice video 👍😉 it's perfect we can see the difference 👍😉 Thank you very much for this video 👍
awsome vid im asking for one of those for my b day fingers crossed
Awesome video, subbed. Just ordered one of these.
Also I thought I had a nice indoor scale course, yours is top notch.
Thanks! Glad you like the course and the content 😄👍🏻
Best looking modded Bronco that I've seen thus far! This video convinced me that it can be a competent crawler after all, so I think I'll pick one up 🤘
Dope! Glad it could help make up your mind 🤘🏼😄
WENT CANDY RED 4 WHEEL.STER.STOP IN CHECK IT OUT✌️
Love your build. I’m about to build mine out. Can’t wait.
Hi this is V&B speed lookn 4 new subscribers thank u
Looking awesome with the upgrades, appreciate you sharing. I’ll be watching for the next video peace and chicken grease
I wish there was a way to get a little sag in the stock suspension. Physically lower it a few mm
You can re rout the suspension mounting points to a different spot in the frame so they are angled
I just got the bronco too; same color and I put the same stickers as well as removed the axial logo. So far I’ve only installed brass diff covers and brass wheel hexes that add 1mm in width. Just with those upgrades and removal of the back tire makes a big difference in performance.
Heck yeah, great minds think alike 😄👍🏻
do u have a link to those wheel hexes
@@Crohniac A lot of companies make them, but the ones I ordered are Treal brand.
@@TKO593 thanks, do u know if the guy in the video has those or the 5mm ones
@@Crohniac Looks like +3mm
Very awesome! I have done quite a few of these upgrades to my Jeep but I am waiting to do a few more like the axels. I want to get the proline Chevy step side body.
I love the Treal products! Now I used the Prolone Hyrax tires with my Treal 20g wheels.
This is completely off topic but where is that explorer body from
Great build. I have the red body. Getting ready to bulk her up...lol
Any chance to post on the description links for all upgrades please?
I have a live stream video where I went in depth on all the upgrades and the install process
Bro I just ordered the blue one and some blue brass....lol I also got some rock creepers I'm gonna put on it.....as you I love the creepers...I'ma keep mine looking pretty instead of a performer...lol love the videos man always man keep them coming man
Thanks bud! Appreciate the support and I’m glad you enjoy the clips and thanks for being at the live stream 🤘🏼😄
Pretty can still perform!
I built a belly dragger bronco with the furitek micro komodo and all brass parts and I love it.
Nice! Sounds awesome
Any chance you can post a parts list?
I’ll work on it
Really changed that rigs capability and it looks great
Agreed! It is a lot more capable now 😄👍🏻
One thing I have noticed that the esc will drain the battery if left plugged in despite being shut off
Yes it will
Truck looks great. Nice video. Your mini crawler course is dope. Damn, I never thought I'd want a 1/24 but these little Broncos have me making an Amain wishlist. That rear tire looks so good but performs so bad. Maybe have to put a massive bull bar out front to balance it.
Woow huge improvement!
Mine came with some dark orange paint splotches on top, but I was able to scrape it away with my fingernail and it was fine underneath. I wonder if the black is the same kind of paint mistake and could be easily removed like mine.
I haven’t tried it but I will, thanks 👍🏻
Could you put a bigger battery in these?
With the stock ESC no it can only handle 2S
Hell yeah man!! Awesome comparison. 😎
Well most things are painted by machines do it's understandable that the machine messed up a little bit but tbh it just makes your bronco more unique
Very good Job brou, nice Crawling, nice crawler, dicken fetten daumen für dein Video 👍👍👍🏎💨💙💙
Hey man great video! I just bought this about an about an hour ago and I’m running into the same problem. Do you happen to have a parts list or a link to the website you used?
looking out your window I see a good spot for a little 10x10 sandbox/mountain 🍺🇨🇦
I got a couple outdoor courses in the works 🤘🏼😄
@@UpperLeftRC that's awsome. I'm working on one myself👍 you should do some videos of the construction process people eat that $hit up....
by ppl I mean me🤣🇨🇦
what tires, and what is giviyou the extra track width? hub spacers?
The tires are RC4WD Rock Creepers, the track width is from the Treal weighted wheel weights that look kinda like brake rotors, they add a little width
@@UpperLeftRC awesome thanks man, looking to get a bronco and think im gunna start with wheels and tires with those wheel weights
Sweet looking rig bro.👊
When my battery is really low, my truck drives in reverse by itself lol. When i charge it, it goes away completley.. its pretty modified but still has stock esc, motor , and servo for now. Any idea? It weighs 14g so quite a bit heavier than stock
That one has me stumped lol I’ve never heard of that happening before 😂
Can’t wait to get the bronco! Still need a gladiator too!
Heck yeah! Fill out the whole collection 😄👍🏻
Awesome rig! Hey man I’m from Washington too. Any crawler courses or clubs you know of. I just started, new to RC. Great channel!!!
Glad you enjoy the content! I don’t know if any clubs around here, just my local hobby shop in Chehalis WA. They have a small indoor crawling course 👍🏻
It falls over really well!
By chance, do you have a list of all the upgrades for your bronco?
I’ll let work on it
Did you think about overdrive for the front end?
Nah,y personal opinion is that overdrive does more harm than good, it will always make either the front or back tires lose traction in any scenario
@@UpperLeftRC thanks
Did you replace the stock motor? Does anyone worry about to much weight burning up the stock motor?
I did replace the stock motor, and yes when you add this much weight to a vehicle it can for sure burn up a stock one
Awesome build love it, I just got the same rig so I have some spending to do. Lol
Careful it adds up quick lol
@@UpperLeftRC how much cheddar are you into these upgrades?
Maybe run you're springs alot looser still see not max flex but it runs 1000 times better what was the extra cost for the upgrades?
I had a hard time finding springs that would balance between correctly, the rig was so heavy that they either collapsed under the weight and had no suspension or where so stiff it would barely flex, so I choose the super stiff option but I’ll work on tweaking them, the total was over $500 I think, it’s been a while but it was a lot and not worth it at all lol
@UpperLeftRC Wana sell it or what hahah
Hello from southeast alaska do you have any stickers for my rock crawlers?
What servo did you use? Ive been upgrading my branco hard latley havent done servo or motor yet
Emax servo, they are cheap but strong 🤘🏼😄
Ahhhh! Well I think I watched this a day too late. I debated on the rock creeper. But ended up getting the rc4wd wrangler mtr. And treal wheels aluminum brass combo. Hope it works out!!
The wranglers are good tires too, I’m sure you’ll like them 😄😄
That was sweet !
We just got 3 for me and my boys(13) (16) how much was all that modification!?? I may modified mine first!! Thanks great video!!
About $300 for all the mods in the video
Looks great. Do you think you will need a motor upgrade to handle the extra weight for the long run?
I installed a new motor
Had you not installled a new one, would stock be ok for the weight change?
@@theparadigmshift74 I would think so
@@theparadigmshift74 The more I think about it, it would probably burn out faster depending on how much you use the vehicle
Nice wish we could get scx24s in south africa
Hey man I’m thinking about getting this, how much would the total cost be for everything you put on it including the truck, and I am new to rc cars but I was wondering what upgraded motor can I put in this without modifying the body?
And can you link those tires or tell me the name of them?
The upgrades were about $300 - $350 and the tires are RC4WD Rock creepers
How much $$$ went into this
A lot
How much did you spend in total on upgrades?
A little over $340
Really like what you have been doing there - is there a list somewhere showing what parts you have been using ? And if you dont mind telling what have you spend on that build - i am new to the crawler hobby and i got no clue how much cash you invested there :-P
Keep up the good work
The truck itself is about $150 and the upgrades were another $300 ish
Heavier they are the harder they fall. lol the slo mo part.
😄👍🏻 you got that right lol
I think id do what you did! Cheers from wisconsin
Cheers! 😄👍🏻
With all the upgrades Iv'e done to my scx24 Gladiator I could have bought another one lol.
Same here lol
🇩🇰🇩🇰🤗Nice upgrades🙏🇩🇰🇩🇰
So you had to spend more than the truck itself on the truck to make it work properly 🤣
Correct lol
link the upgrade parts for us lazy ppl
that thing is a pos out the box