Create a Structural Composite Floor with Metal Deck Profile in Revit

Поділитися
Вставка
  • Опубліковано 20 сер 2024

КОМЕНТАРІ • 37

  • @8020BIM
    @8020BIM  4 роки тому +1

    Quick Note : Around the 11.40 mark I assigned the Wrong Deck Profile to the Structural Slab. I should have used the Comflor 60 deck that we generated the Profile family before but absent mindedly I assigned it to the Comflor 70 that was already present in the project. My Bad!

    • @KlavierSynth
      @KlavierSynth 4 роки тому

      The Comflor 60 deck was not in the list, anyway...

    • @8020BIM
      @8020BIM  4 роки тому +1

      @@KlavierSynth hi Edgar, yes I think I failed in loading it in. 😅

    • @KlavierSynth
      @KlavierSynth 4 роки тому +1

      @@8020BIM I guess it did not load because you added the thickness to the metal deck 60 you draw!

    • @annafranceschi807
      @annafranceschi807 3 роки тому

      @@8020BIM i failed in loading it too. How can i load the new "personal" family correctly? thank you very much.

  • @malekelsayed144
    @malekelsayed144 4 роки тому +3

    Keep pushing this channel, your delivery is clear, concise, and properly explained without leaving room for guesswork. Thank you for the video, looking forward to seeing your channel grow.

    • @8020BIM
      @8020BIM  4 роки тому

      Thank you Malek, glad you found value in the video. I have a few other videos around structural modelling specifically on the channel that you may be interestes in, such as modelling purlins and cladding rails, creating unique beam Families and modelling Hollowcore Floors etc.
      Thanks again!
      Niall

    • @malekelsayed144
      @malekelsayed144 4 роки тому +1

      @@8020BIM Time for a geeky binge session

    • @8020BIM
      @8020BIM  4 роки тому

      @@malekelsayed144 😅😅👌

  • @thegentletraveller7278
    @thegentletraveller7278 4 роки тому +2

    Thank you so much for the tip. Right today I had that problem with the edges and didn't know how to deal with it!!! Great!!!!

    • @8020BIM
      @8020BIM  4 роки тому +1

      Great, delighted to have helped. 🙂
      Niall

  • @brianandrews3936
    @brianandrews3936 4 роки тому +1

    Excellent tutorial. Thanks Niall!

    • @8020BIM
      @8020BIM  4 роки тому

      Thank you for your kind words Brian, glad you found the video informative.
      All the best,
      Niall

  • @ritchiesweny610
    @ritchiesweny610 Рік тому +1

    Very helpful, thanks a mill man

    • @8020BIM
      @8020BIM  Рік тому

      You're most welcome Ritchie

  • @User_2026_
    @User_2026_ 9 місяців тому

    that was very good and useful and here is a subscribe!

  • @RevitTeklaStructureModular
    @RevitTeklaStructureModular Рік тому

    Wow sir very nice

  • @rozaane_
    @rozaane_ Рік тому +2

    is the structural deck that bound with layer above counted into the volume result (m3) ? your answer will be helpful

  • @JS-sy1pr
    @JS-sy1pr 3 роки тому +1

    Perfect tutorial, exactly what I was looking for.
    Quick question, what if I actually want to also show the metal decking in the Revit model? Is that possible?
    Cheers

    • @8020BIM
      @8020BIM  2 роки тому

      With this method you cannot see the floor deck in 3D. As defined by the ISO 19650 standards of level of information need it wouldn't be recommended either due to the complexity of the surface repeating over such a large span.
      Niall

  • @glennmaccormick8068
    @glennmaccormick8068 Рік тому

    Hi! Like others in the comments, the profile I generated is not showing up in the Structural Deck Properties. Mine is just single lines (so no thickness like the example you showed) but I only see one option which is not the family/profile I created. Any thoughts?

  • @20071554
    @20071554 4 роки тому +1

    Is there any possibility of creating that same profile but at the top part of the floor? Instead of having the relief at the bottom part of the slab, having it at the top part facing upwards. Thank you!

    • @8020BIM
      @8020BIM  3 роки тому

      That is a good question Alonso, truthfully I have not had a need to try it - if you try please lt me know how you get on, curious myself now :)
      Niall

  • @progressive17god31
    @progressive17god31 4 роки тому +2

    Great tutorial, just one question... once a metal deck has been assigned I suppose that revit takes that into account when making material takeoffs right?

    • @8020BIM
      @8020BIM  4 роки тому

      Hi there, thanks for the feedback. Yes it should be no issue. The material takeoff for the deck is area based so the material takeoff should be relatively straightforward.
      Regards
      Niall

    • @rozaane_
      @rozaane_ Рік тому +1

      i did my own trial. i compared between floor 120mm with the deck and the regular 120mm. you know what? idk why but same volume (m³)

    • @rozaane_
      @rozaane_ Рік тому

      cmiiw

  • @danemorel9910
    @danemorel9910 4 роки тому +1

    hi there. ive followed your instructions to the T - but yet when i open my structural deck properties, my new deck profile cannot be found? do you know why this is?

    • @8020BIM
      @8020BIM  4 роки тому +4

      Hi Dane. Your Issue might be that your profile has a depth (as it was for me in the video). What I mean by this is the profile should not have a thickness. So instead of drafting the deck profile family with the nominal steel thickness you should just have the bottom line of the profile in place and not account for the real world steel thickness. Once I did this after the video I could see my profile in the drop down list when creating the structural floor assembly. Hope this helps! Let me know how you get on and I'll try answer any other questions that you have in the meantime.
      Niall

  • @annafranceschi807
    @annafranceschi807 3 роки тому +1

    Hi, first of all, compliments for the video. Secondly, I have some doubt in the minute 11:09. Once the fimily is edited and loaded, why I can't see it in the Structural Deck Properties -> Deck Profile??
    Many thanks for your answer!!!

    • @8020BIM
      @8020BIM  3 роки тому +1

      Hi Anna. Your Issue might be that your profile has a depth (as it was for me in the video at the point you highlighted). What I mean by this is the profile should not have a thickness. So instead of drafting the deck profile family with the nominal steel thickness you should just have the bottom line of the profile in place and not account for the real world steel thickness. Once I did this after the video I could see my profile in the drop down list when creating the structural floor assembly. Hope this helps! Let me know how you get on and I'll try answer any other questions that you have in the meantime.
      Niall

    • @annafranceschi807
      @annafranceschi807 3 роки тому +1

      @@8020BIM Thank you very much!!! That was the problem, in fact now is working perfectly :)

    • @8020BIM
      @8020BIM  3 роки тому

      @@annafranceschi807 great Anna, glad it's all sorted for you.
      Niall

    • @kirolosbotros7245
      @kirolosbotros7245 3 роки тому

      @@annafranceschi807 Can you explain to me how you resolved this issue? I am having the same issue where my cant see the family loaded under Deck profiles. I am not sure I follow what he means by "having the bottom line of the profile in place and not accounting for the real world steel thickness". I am relatively new to revit, so a simplified answer or steps on how to resolve this would be very much appreciated!

  • @duyhanhnguyen1119
    @duyhanhnguyen1119 4 роки тому

    Sir. Why to see 3D dont have steel deck, only section

    • @8020BIM
      @8020BIM  4 роки тому +2

      Hi there. At the start of the video I stated that this method does not create a visible deck profile in 3D. The reason for it is because it makes the file too heavy graphically, so the programmers never allowed the profile to extrude in 3D views. If you must see the deck in 3D you can use a model in place family, draw over the 2D profile and extrude it the depth of the floor. Then, cut the floor with the in place family.
      Hope this helps
      Niall

    • @duyhanhnguyen1119
      @duyhanhnguyen1119 4 роки тому

      Thanks you so much.