Here's the list of products reviewed. More details in the video description. Thank you! Hart: www.walmart.com/ip/HART-16-Gallon-6-0-Peak-HP-Wet-Dry-Vacuum/100970191 Bauer: www.harborfreight.com/14-gallon-wetdry-vacuum-56579.html Stanley: amzn.to/3lAW5IT Craftsman: amzn.to/2EPXSJ8 DeWalt: amzn.to/3hNx8ru Ridgid: amzn.to/2UefNB0 DeWalt: amzn.to/31Jfhwh Shop Vac: www.menards.com/main/tools/wet-dry-vacuums-accessories/shop-vac-reg-heavy-duty-wet-dry-shop-vacuum/5986038/p-1444442261415.htm#:~:text=The%20Shop%2DVac%C2%AE%2014,%2D1%2F2%22%20accessories.
Todd, it's been 4 years... I'd LOVE to see you do another take on this, what with DeWalt coming out with the stealthsonic. I honestly feel like that could beat the Craftsman (and I own a Craftsman, based on your tests!)
This guy has to be the most honest and respectable UA-camr on this platform, he spends hundreds of dollars on every video on equipment, goes above and beyond with the tests for each piece of equipment, throughly testing of what piece of equipment is capable of and how they compare to their counterparts, the presenting of the videos is also appealing and also addicting to watch especially tests being very unique, he listens to his audience while being very open minded to what they suggest and even makes comments on about every comment I see and has done so for years! Outstanding job, keep up the great work.
I agree. I commented on how he stores his hay bales outside, with a reason why could be better. He replied, with a thanks and I'll try it. (something like that) Good comment Stacksofslaps
I wonder what @Project Farm 's wife thinks of his UA-cam job. At least her man is home all day, when he's not out buying stuff, even if there is tons of noise coming from the garage. Heh
@@ProjectFarm Great video. The only thing I would have added would have been to show the ammeter during at least one of the load conditions. I don't think I've seen the Bauer or Hart brands before. Who sells those?
I needed a more compact shop vac, so I bought the 8-gallon version of the Craftsman based on this video. It rocks! Thanks for helping us all spend our money confidently!
Yes. I enjoy re-watching the second of his lubricating/penetrant spray videos for some reason. I switched from WD-40 to Seafoam Deep Creep because of him and I have been very pleased with it.
So many, especially nowadays, are just spec sheets side by side, where a simple program could (and definitely does in some cases) just write the comparisons. PF actually shows everything and doesn't pick a clear winner most of the time, it actually gives you real world info and compares them in a useful manner. And any company is going to just focus on making the box specs look good, as evidenced by some of these vacuums having higher PHP, but drawing much less power, meaning they're doing less actual work.
Hey Todd, could you please think about doing a refresher on this subject? After 3 years, it'd be advantageous to create a new review video, considering wet/dry vacuums' new and improved models.
Yes, Todd, I’d love to see this updated. It’d be great to see your current style of presenting your reviews that include summary spreadsheets (that I always screen cap) and such. Love your stuff and I always come back when I’m looking for something. This is why I’m a happy, paying subscriber!
Corporate America and China both use the consumers for quality control testing, some of the American corporations will generally make up for the problem if you will just call customer service which I do quite often. Forty years ago we had no need of QC as many of the workers were responsible for good quality, Corporate America and China sure took care of that !
Just a reminder....even your 2 year old videos are STILL extremely helpful! Lookin for a compact but between your cordless & corded shop vac reviews, I'll be going with a RIGID compact. This channel rules. I love how methodical your tests are, no specs, just real world testing which is far more important imo. Even for tools i have absolutely no need for, I can't stop watching. It's like watching Olympics for tools...soo addicting gj
I don't even live in the USA, so I'll probably never see any of these products available at any store near my home. anyway, i keep watching each video, simply because they are so freaking good, very informative, and fun to watch .
@@pqrstzxerty1296 All Asdas are Wallmart but not all Wallmarts are Asdas... Point I'm trying to make is Asda =/= Wallmart. Asda is pretty much food & grocery only, whereas Wallmart is everything and even sometimes contains _other_ shops! Where else can you get a sandwich, a TV, a bite from KFC, a really powerful vacuum, and *still* be able to go a few isles over and buy a *gun AND ammo* for said gun. And if Covid hadn't happened when it did, Wallmart likely wouldn't own a _majority_ share in Asda. They don't fully own Asda, they just own _more_ of it than anyone else right now.
Just don't get too big of a capacity, as they are heavy when full. A 5gal is about right if you have to pick it up and dump it into something...Trust me, I know.
The rigid is a very well built vacuum i abused mine left it in the rain many times dropped it. Really just beat on that poor thing but it has lasted me over four years of very abusive construction clean up and many thousands of gallons of dirty water sucked up
@@connorhoffman6702 If they're using the same motor, I would assume yes...But really can't say for sure. Craftsman (Lowe's) is making some good stuff these days. I would check reviews for a good indication, though not absolute like with the PF reviews.
I had a lot of fun with testing the shop vacs, especially the grudge match near the end of the video! A huge "thank you" for the video suggestions! Trust me, the shopping cart is rolling faster and faster with some more tool videos on the way. Hope everyone has a great week and looking forward to reading your comments!! Best regards, Todd
You bless the world with invaluable information in every video you post thank you for the dedication to giving a live consumer review of products that are important to me.
By any chance can you caption the gallons and weight to liters and kilos ? Its very hard to understand for us folks in the world. Other than that, thank you for all ghe information and help with your videos!
@ProjectFarm - would love to see a video on the best Paint Strippers. Either Toxic, Non-toxic, All Natural or whatever. Would really love to know what the best in those divisions are. Love your videos, keep up the great work. #ProjectFarmTestedandApproved
That is not what this means... It means they actually build all the separate components overseas (China, Mexico, whatever) and then they assemble the various components here in USA so that they can get around certain taxes, customs and of course so they can say "assembled in the USA" to make you feel better.
T.A.M.T The All Mighty Texan Everything causes cancer in California. The politicians are idiots for making California a nightmare place, and unnecessary crap like this.
My daughter living far away asked for my opinion on buying a shop vac for her husband, a military officer. I just rewatched your shop vac review and was able to give her a thoughtful recommendation. Thanks for your reviews. They’re the best!
Honestly. Nothing warms my cold heart like buying a Craftsman vacuum a year a go and then coming here to find that it tested one of the best overall with a good warranty. 😂Thank you for these fantastic videos!
Im thinking the craftsman shop vac is a rebranded ridgid, ridgid is the best shop vac in my opinion they might not roll after 5 years of hard use but they last forever
Jonathan K good thing it’s your opinion because factually that’s not true. Craftsman beat Ridgid. No company would rebrand a product and have it perform better than their own name.
Bought a Bauer from HF a few months ago and have been very impressed. It will suck up anything. We have 100+ year hardwood floors in parts of our house and the Bauer makes quick work of all the crumbs, hair, dirt, etc. that end up between the gaps.
I have a Bauer Shop Vac and use it for almost everything. Picks up water almost effortlessly. I just used it to connect to my orbital sander for a wood bench project, and it pulls all the dust with only the occasional need to remove the filter and tap out the dust before going back to work. It's really a great product and glad I got it.
I love the way you interact with your fans! It is so nice of you to like all the comments, and to respond to many of them. You have to be one of the most genuine youtubers around today. Thanks project farm!
I bet you could get that bauer on sale with a 2 year guaranteed warranty for less than the Dewalt. If it breaks for any reason in 2 years, you go back to the store and get a new one. That dewalt warranty is basically worthless.
I'd really love to see a section at the end of the video with all the charts from the tests on one screen. I find I need to takes notes of each tests chart to compare all the results. It would be way easier and better to have them all in one place. Thank you very much for all of your time, money, and effort that you put into these videos.
My first comment on PF, sorry for that, but i rly appreciate all the time and effort You put into this. It really helps us end consumers! Thanks from Sweden
There were MANY surprise results in this test! Still waiting on my most accurate tire pressure gauge ;) Keep up the great work! You're a true hero for testing literally everything in the shop and home.
@@jonanderson5137 Exactly like the totally stupid and meaningless "PMPO" Megawatt rating races of cheap stereos and boomboxes according to Sony, Panasonic and other garbage class electronics...
This channel is probably my favorite UA-cam channel out there. Every time I get a notification that a new video has been posted, I'm as or more excited than when my favorite TV shows have a new episode. I wanna go live at ProjectFarm.
I had to check if you did a video on shop vacs before I purchase one for my husband for Christmas. The effort you put in is far superior than anyone else. Thanks for all your video comparisons!
Most of my time in the hardware store is spent just taking up space in the isle blasting the Project Farm video for whatever I'm about to buy. Time well spent.
Thanks so much for making this video! When I vacuum wasps on my channel, people always comment for me to get a "better vacuum" so its great to have a video to send them to now to see what factors play in to choosing a vacuum for different applications! Great video, brother!
Your self-created test methods are brilliant, effective and entertaining! Be careful, someone's gonna steal you for their R&D department!! Thanks so much👍
I know from experience shop vac won't honor their warranty unless you have the original receipt. Which if it's a couple years down the road is unlikely.
Apologies for a double comment but something needs addressed right now. Far too many of us have not taken the time to appreciate the work which actually goes into each video. The time spent editing and arranging all of the footage into the final product alone is more than note worthy. The narration itself is an entire additional step which I am pretty sure is not a one take effort. Here is where I lose a lot of people. lol If you were to go to a "pay to view" format, I would not hesitate to pay. Because in the end, all videos are WELL produced. And all data is as accurate as humanly possible at all times. Never is there a hidden string holding something together making it work. What you see IS how it is. And at the end of the day, I respect honesty and intellect. Seriously, very well done. I honestly feel you are going to obtain undeniable fame the nation over which spreads way beyond youtube. How far you go is up to you. But many of us will be right there supporting you the entire trip. All we ask is make at least one attempt to avoid selling out to netflix. lol They take WAY TOO MUCH of the star's money.
@@theduder2617 " If you were to go to a "pay to view" format, I would not hesitate to pay.", you can stop hesitating and go join his patreon. If you like his content and expressed the interest in supporting him why not do it now, instead of waiting? Heres the link to make it easy www.patreon.com/projectfarm
@@Number1fanofcaptain Allow me a moment to inquire about your membership. I mean, since you took the time to try to tell another what to do and all. You misunderstand what I meant by pay to view. I would rather not have a third party putting their hands out if I am trying to donate to an individual. I support Project Farm, not patreon employees. If they want my support, perhaps they should start their own channel and upload interesting and very useful content. Until then, my avoidance of patreon has its reasons. When society calms back down and work picks back up in full swing, I'll make my move. For now, things are a bit tight due to our shoddy public spokesperson somehow being able to dumb down the masses enough to refuse to comply with health safety rules, thus lengthening the amount of time people have to socially separate, and extending the amount of time people are laid off from work.
@@theduder2617 Then, as you wrote almost a book when you comment anyway, you should have used some of your writing to actually say what you meant. Also, if he goes "pay to view ", many of us wouldn't be able to watch because, you know, so much unemployment and a very unstable economy. Even without the pandemic some of us may not be able to justify paying for things like this. At the end, they are doing it for their own reasons and helping all of us by doing it, so you, mr reach, don't kill it for all of us.
Can we take a moment to appreciate the work put into building this wind tunnel to test the air speeds of SHOP VACS!!!?? Good God man, you half ass nothing! Lol. Thank you for these vids bro. I truly appreciate the efforts you put in and before I buy literally ANYTHING, I first check to see if you’ve created a video on it haha.
You won't go wrong with Craftsmen or Rigid ! They are made in the same factory and 35 years in construction l have tried them all ! You want the Big 2.5 inch hose models. The smaller hose diameter can get clogged easier when picking up larger debris .
Just commenting to say Great Job Todd 👍 and Thanks for doing what you do. A few days ago I was in Home Depot and literally watched one your videos before buying drill bits. I hope you continue to make enough money to support you and your family and produce the best quality content you’re capable of. The videos you produce are the definition of quality over quantity. You’re the only channel I LOYALLY watch multiple times.
Tell us straight, after the cashier at the home improvement store saw you buying seven shop vacs after selling you manikin heads and bobbing mechanisms 4 weeks ago, was there just this really longggggggggg awkward silence? Kidding. Again great video Todd. Educational as always. I like how you had a lot of fun with IT and the "suck off" showdown at the end of the video, very creative. Keep up the good work.
You said that a company standing behind their product is important and I couldn't agree more. But a warranty on paper doesn't mean anything if it isn't backed up in the real world. So, here is another video idea. Test the warranties from the big brands. Can you go in store, or do you have to ship off to a service center? Who pays for shipping? What kind of wait to have the tool repaired or replaced? You could even test the big stores extended warranties and see if they are worth anything. ie. Does Harbor Freight really stand behind their "Extended Service Plan"?
Important info yes but nobody is going to watch a video of being on the phone or at the store trying to get warranty. The best case is still going to be boring.
I agree, I have bought products from big-name "high end" brands that have claimed lifetime warranties, only to be slighted by their warranty refusal after normal wear and tear. I typically try to buy a product that I think is a good balance of value and quality out of the box, and I imagine how long it may last me for the money spent, regardless of warranty promises.
Shopvac was a total letdown. I have their mini version I bought Black Friday for $10 almost 11 years and and does the job though. I was rooting for it though..
I have a real Sears Craftsman I paid $99.87 for about 22 years ago. It still runs great and zero problems. But if I bought a shop vac today; I would go with a Rigid. How can you beat a lifetime warranty on their tools. I love their 18volt power tools as well; also backed by lifetime warranty including the lithium batteries. But I am glad to see an impressive comparison test. Wow!
You have an extraordinary imagination to create some of the most Rube Goldberg test devices. Your contraptions are better and more relative at displaying real world performance than those on infomercials designed to reinforce supposed superiority of the products being foisted upon consumers. Bravo, sir, bravo.
Thanks for the comparison video! I was excited to buy our first wet dry vacuum after using someone else's the cleaner garage, and using your comparison video, I went with the 14 gallon Bauer vacuum from Harbor Freight. It's on its way right now, and I can't wait to put it together!
The content in this channel and the way the products are tested and the variety of options to choose from is just a national treasure. Keep up the good work!
I'm glad I chose the Craftsman many years ago and it still is going strong. You are amazing, your testing goes beyond anyone else. 👍🏻 I always check you before I buy anything.
Just picked up a vac today. I was standing in lowes watching this video before I left with a craftsman lol. I got the one that can also be used as a leaf blower which I did t even know it did that until I got home.
@@vonhousin4179 hope it works out well for you. Yeah the exhaust on these is pretty strong. I never used it to blow leaves I had a leave blower but now I have a condo. Lol
The one test that can't be practically done: longetivity. My Craftsman is going still doin' the job after 18 years (although admittedly, not much wet work).
Project Farm i second this and think the dyson v10 should be one tested, I own one I think it’s pretty great but I don’t know if it’s really worth the £350 it costs.
I remembered to check out your review prior to purchasing a replacement wet/dry vacuum. After watching, I will go with the DeWalt for performance and brand name reputation. Your analysis was professional and complete. You should have you own TV show. Thanks for your efforts.
I LOVE that you get to the point! Each category, each test, you give it to us straight and then move on. Thank you!!! (I hate when other youtubers just ramble and fill time)
An important test would be to pull the vacuum around by the hose over various surfaces to see which ones are the most stable. My pet peeve is “tippy” shop vacuums. Thanks for posting so much great content. Love your channel!
I've got a Ridgid HD1200 12 gallon and it has a wide base for the 4 casters. Sometimes it's too big to roll into some places. It's much better than my old shop vac.
Awesome comparison. I was about to buy the rigid but I guess I’m going for the craftsman now! Thank you so much for taking the time and the resources to create an in-depth and unbiased comparison!
@@ProjectFarm man, thank you for all you do. Hopefully soon product manufacturers will start putting "project farm approved" or something similar on their packaging. That'd be awesome!
I just wanted to say thank you so much for that video. I have a rigid vacuum with a lifetime warranty and watching your video. You reminded me that they do have a lifetime warranty without this video. I would not have been able to bring the vacuum back to Home Depot and get a brand new one. This next vacuum is on Home Depot, thank you so much for the video
Test idea: antifog sprays/diy solutions. This is for everyone who wears glasses and a facemask of some kind, including firefighters, surgeons, etc. Thanks!
Most amount of crap is either shop-vac HP, or air compressor CFM output. Compressor companies rate their compressor’s air flow at 1atm, while tool companies rate tool air usage at 90psi.
Thanks for listing the noise (dB) levels. After decades my old, but quite, shop vac had to be replaced by one I purchased at Home Depot. It also is LOUD like the Shop Vac brand. I contacted the company who affirmed that dB level.
I got a 10 gallon in my work space, but I'm getting hungry for that Bauer just looking at it slay the other brands. The 90 day warranty make speak to some potential quality control issues tho
wow what an excellent review. I love the objective tests that show clear metrics. Much better than some of the subjective reviewers out there! I very much appreciate the time taken to conduct the test, as they were factors when deciding to purchase my first shop vac.
Watching this I was most impressed with Craftsman honestly. Though somehow I felt bad for it during the 3 bucket segment where it seemed to throw up the excess water. Awesome video and awesome effort!
Needed a shop vac with strong suction for cleaning out gutters, and I knew your channel wouldn’t disappoint. Went and got a DeWalt after watching, thanks for testing!
I love watching these just to see what methods of testing he comes up with. It's like watching MacGyver, he explains everything in good detail so your actually learning more than just which product is best. Very satisfying! Excellent value for $5 a month patreon.
Great video. Maybe a durability test. Start them all, last one standing wins. I use a shop vac for dust collection in my shop and leaving it running for an extended time happens frequently. Extended run time without fear of fire or destroying the vacuum is a major factor. Thanks for ALL your great videos.
This is a great idea. A few years ago I had a Rigid that accidentally got turned on when I was out of town for a couple days. It died while I was gone, which surprised me. It was about 5 years old and didn't get used that often, but could not take being continuously on for maybe 48 hours.
Not gonna lie, The Bauer surprised me. That said I have a Rigid I bought on a bit of a whim. It is a 16 gal and doesn't have the blower attachment and honestly has been incredibly good. It doesn't seem to suffer from the same design problems that one did as its lid and bucket are quite snug.
I got my ridgid out of a dumpster 5 years ago. Been beat to hell and back, rained on, etc and is the best damn vacuum I've ever had. They are really tried and true.
I had my rigid burn up on me after a couple of years. Sucking up baking soda was the last straw. I'm sure some of it was my fault, but still expected better performance.
I had an Old School Shop Vac for years. When it finally conked out on me, I bought another one. I was disappointed in the decline of quality. I'm glad I got to see this review. I am going to invest in a Dewalt. Mine gets used hard for construction clean up. I would have liked to see how they do picking up nails, drywall dust, wood scraps etc. Drywall dust clogs up a filter fast which reduces suction. It would be interesting to see which one lasted the longest with drywall dust.
I'm also slightly disappointed in my new shop vacs performance, but I think it's due to a smaller hose diameter then my old one. However, im still glad to be supportive of a brand that's contributing to USA jobs instead of outsourcing.
This is one of my favorite channels. I am always so satisfied by your methodology, however, when you were measuring the suction force on that ball, the different surface area (hose size) will greatly increase the force measured for a given pressure created by the vacuum. Much respect, keep up the excellent work!
PF is semi-scientific. Far too many variables to work out on that particular test (leakage, hose surface, wind speed, etc., etc.). But the ball size never changed which did give him a constant to work from.
Again Project Farm proves it is *by far* the best channel on UA-cam. Excellent, *thorough* review as always. Not only was it informative, it was entertaining! :)
Difficult to put into words... your videos are the Tool Time "argh-qrgh-argh" .... I really enjoy them. I'm the nerdy computer guy with glasses, pocket protector & briefcase (well.... when I was 18, anyway). I really enjoy them, as I "studiously" take notes on the, "man, if I ever buy another vac, it's gonna be a ". Thanks for all your time & effort on these.
I just purchased the Craftsman thanks to your testing, I'm excited to put it to use! I also was able to purchase it at Ace Hardware for only $107 and that's including taxes. The regular price was $110 and I paired it with a 10% off coupon. Thank for your videos!
Another great video from the most trustworthy gentleman on the internet. If you are looking for a new product, there is no better place to come to see products demonstrated with tests you would never even think of. Honesty and no bias here.
Here's the list of products reviewed. More details in the video description. Thank you!
Hart: www.walmart.com/ip/HART-16-Gallon-6-0-Peak-HP-Wet-Dry-Vacuum/100970191
Bauer: www.harborfreight.com/14-gallon-wetdry-vacuum-56579.html
Stanley: amzn.to/3lAW5IT
Craftsman: amzn.to/2EPXSJ8
DeWalt: amzn.to/3hNx8ru
Ridgid: amzn.to/2UefNB0
DeWalt: amzn.to/31Jfhwh
Shop Vac: www.menards.com/main/tools/wet-dry-vacuums-accessories/shop-vac-reg-heavy-duty-wet-dry-shop-vacuum/5986038/p-1444442261415.htm#:~:text=The%20Shop%2DVac%C2%AE%2014,%2D1%2F2%22%20accessories.
Todd, it's been 4 years... I'd LOVE to see you do another take on this, what with DeWalt coming out with the stealthsonic. I honestly feel like that could beat the Craftsman (and I own a Craftsman, based on your tests!)
Before I buy anything I always check to see if you've done a comparison.
Nice! Thanks for watching.
You’re damn right, as you should haha!
It's all made in the same chïnese factory
They just slap a different logo on it
Definitely agree ,can't beat his unbiased testing!
uuuultra ✔️ wrong, you forgot about the Mexican factories
I remember when Consumer Reports was the go-to for product comparison. Now it's Project Farm.
Wow! Thanks.
Consumer Reports is garbage. They take "donations" from numerous manufacturers, therefore biased.
@Big Crunch ditto to what Tyler said. This is my go-to resource. Keep up the good work Project Farm!!!!
Now we going to send you to engineering school so you can make even better testing lol
@Big Crunch Mahk
This guy has to be the most honest and respectable UA-camr on this platform, he spends hundreds of dollars on every video on equipment, goes above and beyond with the tests for each piece of equipment, throughly testing of what piece of equipment is capable of and how they compare to their counterparts, the presenting of the videos is also appealing and also addicting to watch especially tests being very unique, he listens to his audience while being very open minded to what they suggest and even makes comments on about every comment I see and has done so for years!
Outstanding job, keep up the great work.
Thanks so much!
I agree. I commented on how he stores his hay bales outside, with a reason why could be better. He replied, with a thanks and I'll try it. (something like that) Good comment Stacksofslaps
I wonder what @Project Farm 's wife thinks of his UA-cam job. At least her man is home all day, when he's not out buying stuff, even if there is tons of noise coming from the garage.
Heh
@@ProjectFarm Great video. The only thing I would have added would have been to show the ammeter during at least one of the load conditions.
I don't think I've seen the Bauer or Hart brands before. Who sells those?
Amen. Best reviews ever. I watch every single one.
I needed a more compact shop vac, so I bought the 8-gallon version of the Craftsman based on this video. It rocks! Thanks for helping us all spend our money confidently!
You are welcome! Glad to hear!
@@ProjectFarm b BJJ h HH ñj JJ
@@ProjectFarm b BJJ h HH ñj JJ
Anyone watches his videos when stressed out? Something about his presentation and tone is very calming while also being educational.
Haha yup, I'm here taking a break from studying for a forest ecology/tree ecophysiology exam lol
Yeah man, I'm taking a rejection super rough rn. Just trying to not think about it
I think UA-cam in general is a great way to escape the general stress in life. Finding awesome content like this helps us all out!
Yes. I enjoy re-watching the second of his lubricating/penetrant spray videos for some reason. I switched from WD-40 to Seafoam Deep Creep because of him and I have been very pleased with it.
Yes
I'll never be able to read another Consumers Reports "test" again. They look amateur compared to PF
Haven't trusted them after what they did to the Suzuki Samurai
Project Farm is like a hands-on version of Consumer Reports. It really helps when you can see the items being tested and the methodology.
@@therealtimmyjimmy1306 that's a fat mood
So many, especially nowadays, are just spec sheets side by side, where a simple program could (and definitely does in some cases) just write the comparisons. PF actually shows everything and doesn't pick a clear winner most of the time, it actually gives you real world info and compares them in a useful manner. And any company is going to just focus on making the box specs look good, as evidenced by some of these vacuums having higher PHP, but drawing much less power, meaning they're doing less actual work.
@@fireyblackdragon like, where else am I going to find the 'time to succ 50 lbs of sand' and 'actually holds X gallons of water' on a lame spec sheet
"Assembled in the USA"
"*By the purchaser" 😂😂
yeah my thought exactly . Between that and Bauer boxing matches I couldn't stop laughing ,
lol Thanks for watching.
@@uuuultra zzz
😂😂😂
True they know where it was intended to be sold! Lol
Hey Todd, could you please think about doing a refresher on this subject?
After 3 years, it'd be advantageous to create a new review video, considering wet/dry vacuums' new and improved models.
Would be nice to see one on battery operated shop vacs.
Yeah that would be great! I’d like to see if Numatic vacuum cleaners are worth the price.
Yes, Todd, I’d love to see this updated. It’d be great to see your current style of presenting your reviews that include summary spreadsheets (that I always screen cap) and such.
Love your stuff and I always come back when I’m looking for something.
This is why I’m a happy, paying subscriber!
To be fair: That Shop Vac was assembled in the U.S. because you did all the assembly.
lol That I did!
Unfortunately there maybe no more shop vac brand anymore they just shut down a plant in my area.
Shit, this guy beat me to writing this comment.
The parts are made in Williamsport p.a and for shipping you do have some assembly. And they have the best customer service.
@@staggdegraaff1531 Not anymore the factory shut down a few weeks ago
4:38 “Assembled in USA” because it’s assembled by the consumer hahaha
made with ''global'' products
China :)
lol Thanks for watching.
"Assembled in USA" means they put the finished parts in a box...no kidding.
Corporate America and China both use the consumers for quality control testing, some of the American corporations will generally make up for the problem if you will just call customer service which I do quite often. Forty years ago we had no need of QC as many of the workers were responsible for good quality, Corporate America and China sure took care of that !
My exact thought
This is why Im on Patreon. This couldnt have been cheap!. Thanks so much!
Thank you VERY much for supporting on Patreon! Patreon is allowing me to fund more and more expensive tests. Thanks again!
@@ProjectFarm I seriously check your channel before I purchase the items you test. Most recently razor blades ha
Project Farm now has a vacuum in every room lol
Just a reminder....even your 2 year old videos are STILL extremely helpful! Lookin for a compact but between your cordless & corded shop vac reviews, I'll be going with a RIGID compact. This channel rules. I love how methodical your tests are, no specs, just real world testing which is far more important imo. Even for tools i have absolutely no need for, I can't stop watching. It's like watching Olympics for tools...soo addicting gj
Thanks and you are welcome!
and he even still replies to new comments 2 years later. PF will always be one of my favorites.
I don't even live in the USA, so I'll probably never see any of these products available at any store near my home. anyway, i keep watching each video, simply because they are so freaking good, very informative, and fun to watch
.
Thanks for watching!
Wallmart owns Asda.
@@pqrstzxerty1296 All Asdas are Wallmart but not all Wallmarts are Asdas... Point I'm trying to make is Asda =/= Wallmart. Asda is pretty much food & grocery only, whereas Wallmart is everything and even sometimes contains _other_ shops! Where else can you get a sandwich, a TV, a bite from KFC, a really powerful vacuum, and *still* be able to go a few isles over and buy a *gun AND ammo* for said gun.
And if Covid hadn't happened when it did, Wallmart likely wouldn't own a _majority_ share in Asda. They don't fully own Asda, they just own _more_ of it than anyone else right now.
same here. but since most products are made in china ... what's the difference ?! ;-)
That's awesome dude! Where are you? Brasil? I bet there are many of the same vacs there, just rebranded...
Much needed video! Ive been in the market for a shop vac and could never decide.
Awesome! I gave them all a tough test! Hope the video helps you decide.
Just don't get too big of a capacity, as they are heavy when full. A 5gal is about right if you have to pick it up and dump it into something...Trust me, I know.
@@MrDLRu very sound advice. Much appreciated. Brand performance I would assume is consistant across sizes?
The rigid is a very well built vacuum i abused mine left it in the rain many times dropped it. Really just beat on that poor thing but it has lasted me over four years of very abusive construction clean up and many thousands of gallons of dirty water sucked up
@@connorhoffman6702 If they're using the same motor, I would assume yes...But really can't say for sure. Craftsman (Lowe's) is making some good stuff these days. I would check reviews for a good indication, though not absolute like with the PF reviews.
I had a lot of fun with testing the shop vacs, especially the grudge match near the end of the video! A huge "thank you" for the video suggestions! Trust me, the shopping cart is rolling faster and faster with some more tool videos on the way. Hope everyone has a great week and looking forward to reading your comments!! Best regards, Todd
Thanks for all that you do!
You bless the world with invaluable information in every video you post thank you for the dedication to giving a live consumer review of products that are important to me.
By any chance can you caption the gallons and weight to liters and kilos ?
Its very hard to understand for us folks in the world. Other than that, thank you for all ghe information and help with your videos!
Wish you had used the Kubota one.
@ProjectFarm - would love to see a video on the best Paint Strippers. Either Toxic, Non-toxic, All Natural or whatever. Would really love to know what the best in those divisions are. Love your videos, keep up the great work.
#ProjectFarmTestedandApproved
"assembled in the USA" - makes you assemble it, only sold in the USA. Brilliant legal team behind that marketing.
Thanks for the feedback.
Drive it to Canada and assemble it, then sue for false advertising. It's foolproof.
I was thinking the same thing.
Assembled in [INSERT YOUR COUNTRY HERE]
That is not what this means... It means they actually build all the separate components overseas (China, Mexico, whatever) and then they assemble the various components here in USA so that they can get around certain taxes, customs and of course so they can say "assembled in the USA" to make you feel better.
4:46 Well… you definitely assembled it in the USA!
lol. Great point!
But. What if a Canadian buy is it
@@keatonmiller7883 Huey helicopters will fly over the horizon and claim your property as part of the USA.
Lol ya beat me to it!
Dam thought I was the only person to say it
Tomorrow: 9 vacuums for sale, light use very good condition
lol Thanks for watching.
This product is know to contain chemicals known to the state of cancer to cause California
T.A.M.T The All Mighty Texan Everything causes cancer in California. The politicians are idiots for making California a nightmare place, and unnecessary crap like this.
Lol
@@sritanaiballem6886 huh?
My daughter living far away asked for my opinion on buying a shop vac for her husband, a military officer. I just rewatched your shop vac review and was able to give her a thoughtful recommendation. Thanks for your reviews. They’re the best!
Thanks and you are welcome!
How far away does she live that they don't have youtube?
"Assembled in USA" is technically correct when you have to assemble the entire thing at home after purchasing Lol
Thanks for the feedback.
so you are saying the Avengers were imported and assemble in USA too? Mind-blow!!!
That's what I was thinking 😂😂😂
Assembled By You, Ese
😂
Thanks for being the most honest guy on the tube!
You are welcome!
I love how he just accepts this title like it’s nothing. Love you Tod
Honestly. Nothing warms my cold heart like buying a Craftsman vacuum a year a go and then coming here to find that it tested one of the best overall with a good warranty. 😂Thank you for these fantastic videos!
You are welcome!
As I mentioned in another comment, I've had my craftsman for over 15 years and have used it super hard all along. Still rocks!
Im thinking the craftsman shop vac is a rebranded ridgid, ridgid is the best shop vac in my opinion they might not roll after 5 years of hard use but they last forever
@@jontheguy595 not the Craftsman I have, which is over 15 years old and still kicking.
Jonathan K good thing it’s your opinion because factually that’s not true. Craftsman beat Ridgid. No company would rebrand a product and have it perform better than their own name.
Bought a Bauer from HF a few months ago and have been very impressed. It will suck up anything. We have 100+ year hardwood floors in parts of our house and the Bauer makes quick work of all the crumbs, hair, dirt, etc. that end up between the gaps.
Thanks for sharing.
I’m likely to pick up the 9 gallon Bauer based of this video
I have a Bauer Shop Vac and use it for almost everything. Picks up water almost effortlessly. I just used it to connect to my orbital sander for a wood bench project, and it pulls all the dust with only the occasional need to remove the filter and tap out the dust before going back to work. It's really a great product and glad I got it.
Do the Bauer hoses and nozzles lock in place? That's the most important. I'm tired of my shop-vac tube falling out mid-stroke.
@salazam the hose does. Not the nozzles though. Those slide over the hose end.
I love the way you interact with your fans! It is so nice of you to like all the comments, and to respond to many of them. You have to be one of the most genuine youtubers around today. Thanks project farm!
You are welcome! Thanks for watching!
Personally I'll be buying a dewalt after this. The sand sucking simply sold me👍👍
Thanks for sharing.
See the simply sucking sand ceremony; superb, silly, SOLD!
@@kevin9c1 all always appreciate awesome alliteration!
Instead of using the old saying and tell people to go pound sand, we can now tell them to go suck sand. LMAO 😂
I bet you could get that bauer on sale with a 2 year guaranteed warranty for less than the Dewalt. If it breaks for any reason in 2 years, you go back to the store and get a new one. That dewalt warranty is basically worthless.
I never thought I would be exited to watch shopvac races😂
Thanks for watching.
I'd really love to see a section at the end of the video with all the charts from the tests on one screen.
I find I need to takes notes of each tests chart to compare all the results.
It would be way easier and better to have them all in one place.
Thank you very much for all of your time, money, and effort that you put into these videos.
You are welcome! Thanks for the constructive feedback.
My first comment on PF, sorry for that, but i rly appreciate all the time and effort You put into this. It really helps us end consumers! Thanks from Sweden
Greetings and thank you very much!
THANK YOU SO MUCH!! Recommended this one a while back, your tests are brilliant!
Thank you very much for recommending this one!
answering the important questions as always, keep up the good work
Thank you very much!
There were MANY surprise results in this test! Still waiting on my most accurate tire pressure gauge ;) Keep up the great work! You're a true hero for testing literally everything in the shop and home.
Thanks, will do!
That is a great test idea!! I have 3 dif types with 3 dif measurements, i don't trust any of them.
I look forward to the tire pressure gage test too. I want one that is accurate and reliable and able to check dually tires as well.
+1 to most accurate tire pressure gauge! Digital v analog, expensive v cheap, etc etc
@@slingbart705 That's because tire pressure is a myth. It's a conspiracy by Big Air.
I loved the testing methods chosen...and I absolutely loved the showdown at the end. I didn't expect to enjoy the "fight" so much LOL. Great video!
Thank you very much!
I was actually laughing at his commentary!
I enjoyed your take on what the inflated ratings really mean.
@@jonanderson5137 Exactly like the totally stupid and meaningless "PMPO" Megawatt rating races of cheap stereos and boomboxes according to Sony, Panasonic and other garbage class electronics...
I've been in the construction industry for 15 years & you are the ONLY channel i trust. I LOVED your drill tests & wrench tests.
Thanks so much!
This channel is probably my favorite UA-cam channel out there. Every time I get a notification that a new video has been posted, I'm as or more excited than when my favorite TV shows have a new episode. I wanna go live at ProjectFarm.
I had to check if you did a video on shop vacs before I purchase one for my husband for Christmas. The effort you put in is far superior than anyone else. Thanks for all your video comparisons!
You are so welcome!
Most of my time in the hardware store is spent just taking up space in the isle blasting the Project Farm video for whatever I'm about to buy. Time well spent.
Thanks for sharing.
Hhhaahhaahhaahhaahhaahhah!
Thanks so much for making this video! When I vacuum wasps on my channel, people always comment for me to get a "better vacuum" so its great to have a video to send them to now to see what factors play in to choosing a vacuum for different applications!
Great video, brother!
You are so welcome!
It must suck to be a wasp around you.
I'll see myself out.
@@akairborne - oh no you didn't
@@akairborne please explain I'm lost lol
@@gagejernigan5277 that's what the wasps say too
Your self-created test methods are brilliant, effective and entertaining! Be careful, someone's gonna steal you for their R&D department!! Thanks so much👍
You are welcome!
You should test the warranties on companies and see who really backs their product up.
I’ve had good results with dewalt. I have a problem with one of their flashlights I contacted them and they shipped a new one.
Yep yep
Serious question: Companies deciding length of warranty....does that apply to more stuff? Like appliances, home electronics, tools, etc.?
THAT would be cool
I know from experience shop vac won't honor their warranty unless you have the original receipt. Which if it's a couple years down the road is unlikely.
Since you assembled it the Shop Vac was indeed assembled in the US :)
Great reviews as always!
lol Thanks for watching.
Apologies for a double comment but something needs addressed right now.
Far too many of us have not taken the time to appreciate the work which actually goes into each video.
The time spent editing and arranging all of the footage into the final product alone is more than note worthy.
The narration itself is an entire additional step which I am pretty sure is not a one take effort.
Here is where I lose a lot of people. lol If you were to go to a "pay to view" format, I would not hesitate to pay.
Because in the end, all videos are WELL produced. And all data is as accurate as humanly possible at all times.
Never is there a hidden string holding something together making it work. What you see IS how it is.
And at the end of the day, I respect honesty and intellect.
Seriously, very well done. I honestly feel you are going to obtain undeniable fame the nation over which spreads way beyond youtube. How far you go is up to you. But many of us will be right there supporting you the entire trip.
All we ask is make at least one attempt to avoid selling out to netflix. lol
They take WAY TOO MUCH of the star's money.
Thanks so much!
Put your money where your mouth is and join his patreon
@@theduder2617 " If you were to go to a "pay to view" format, I would not hesitate to pay.", you can stop hesitating and go join his patreon. If you like his content and expressed the interest in supporting him why not do it now, instead of waiting? Heres the link to make it easy www.patreon.com/projectfarm
@@Number1fanofcaptain
Allow me a moment to inquire about your membership.
I mean, since you took the time to try to tell another what to do and all.
You misunderstand what I meant by pay to view. I would rather not have a third party putting their hands out if I am trying to donate to an individual.
I support Project Farm, not patreon employees. If they want my support, perhaps they should start their own channel and upload interesting and very useful content.
Until then, my avoidance of patreon has its reasons.
When society calms back down and work picks back up in full swing, I'll make my move. For now, things are a bit tight due to our shoddy public spokesperson somehow being able to dumb down the masses enough to refuse to comply with health safety rules, thus lengthening the amount of time people have to socially separate, and extending the amount of time people are laid off from work.
@@theduder2617 Then, as you wrote almost a book when you comment anyway, you should have used some of your writing to actually say what you meant. Also, if he goes "pay to view ", many of us wouldn't be able to watch because, you know, so much unemployment and a very unstable economy. Even without the pandemic some of us may not be able to justify paying for things like this. At the end, they are doing it for their own reasons and helping all of us by doing it, so you, mr reach, don't kill it for all of us.
Fantastic comparison including all the parameters I requested and more! Thank you, thank you, thank you.
You are welcome!
It's ironic you asked for a Shop Vac comparison while sporting a name like Dust is a Must haha
I've had my Craftsman 16 gallon for 25 years and it is still going strong!! Great video!
Thanks! Thanks for sharing.
same here, 16 gal 3.5 HP
Can we take a moment to appreciate the work put into building this wind tunnel to test the air speeds of SHOP VACS!!!?? Good God man, you half ass nothing! Lol. Thank you for these vids bro. I truly appreciate the efforts you put in and before I buy literally ANYTHING, I first check to see if you’ve created a video on it haha.
Thanks so much!
A
He’s a phenomenal dude that’s truly doing great things for society.
MAN he had me laughing hard with that wet vac battle
Seriously, this guy is a Legend!
Oh my yes, this is exactly what I need. I've been wanting to buy a shop vac for a while now!
Thank you very much!
You won't go wrong with Craftsmen or Rigid ! They are made in the same factory and 35 years in construction l have tried them all ! You want the Big 2.5 inch hose models. The smaller hose diameter can get clogged easier when picking up larger debris .
Same! Was waiting for this.
Just commenting to say Great Job Todd 👍 and Thanks for doing what you do. A few days ago I was in Home Depot and literally watched one your videos before buying drill bits.
I hope you continue to make enough money to support you and your family and produce the best quality content you’re capable of. The videos you produce are the definition of quality over quantity.
You’re the only channel I LOYALLY watch multiple times.
That is awesome! Thanks so much!
I work for a large construction company, We use Rigid brand, the lids are not loose like showing on this video! Its an Amazing Shop Vac!
Tell us straight, after the cashier at the home improvement store saw you buying seven shop vacs after selling you manikin heads and bobbing mechanisms 4 weeks ago, was there just this really longggggggggg awkward silence?
Kidding.
Again great video Todd. Educational as always. I like how you had a lot of fun with IT and the "suck off" showdown at the end of the video, very creative. Keep up the good work.
Thanks, will do!
You said that a company standing behind their product is important and I couldn't agree more. But a warranty on paper doesn't mean anything if it isn't backed up in the real world. So, here is another video idea.
Test the warranties from the big brands. Can you go in store, or do you have to ship off to a service center? Who pays for shipping? What kind of wait to have the tool repaired or replaced?
You could even test the big stores extended warranties and see if they are worth anything.
ie. Does Harbor Freight really stand behind their "Extended Service Plan"?
This.
Would love to see this too
I second this. Definitely compare warranties, both with the tool manufacturers and the stores that sell them.
Important info yes but nobody is going to watch a video of being on the phone or at the store trying to get warranty. The best case is still going to be boring.
I agree, I have bought products from big-name "high end" brands that have claimed lifetime warranties, only to be slighted by their warranty refusal after normal wear and tear. I typically try to buy a product that I think is a good balance of value and quality out of the box, and I imagine how long it may last me for the money spent, regardless of warranty promises.
"The shop vac brand is assembled in the USA."
Yeah, assembled by the end user 🤣
lol. Great point!
What if I’m in Canada? lol
I thought the same thing🤣🤣🤣
Shopvac was a total letdown. I have their mini version I bought Black Friday for $10 almost 11 years and and does the job though. I was rooting for it though..
LOLLLL
I have a real Sears Craftsman I paid $99.87 for about 22 years ago. It still runs great and zero problems.
But if I bought a shop vac today; I would go with a Rigid. How can you beat a lifetime warranty on their tools. I love their 18volt power tools as well; also backed by lifetime warranty including the lithium batteries.
But I am glad to see an impressive comparison test. Wow!
Thanks!
You have an extraordinary imagination to create some of the most Rube Goldberg test devices. Your contraptions are better and more relative at displaying real world performance than those on infomercials designed to reinforce supposed superiority of the products being foisted upon consumers. Bravo, sir, bravo.
Thanks so much!
Been watching for yrs. The only guy on YT that can make shop vac comparisons feel like a sports event lol. Always extremely entertaining!
Great to hear! Thanks for watching.
yeah but none of the athletes are kneeling with a rapists name on their helmets.
I feel like I shouldn’t even buy socks without your INTENSE testing
Thanks for watching.
LMoLOLAO BEST COMMENT RIGHT THERE lololol
Yes ...perfect, socks!!! Test socks !!!
Thanks for the comparison video! I was excited to buy our first wet dry vacuum after using someone else's the cleaner garage, and using your comparison video, I went with the 14 gallon Bauer vacuum from Harbor Freight. It's on its way right now, and I can't wait to put it together!
The content in this channel and the way the products are tested and the variety of options to choose from is just a national treasure. Keep up the good work!
Thanks, will do!
I'm glad I chose the Craftsman many years ago and it still is going strong. You are amazing, your testing goes beyond anyone else. 👍🏻 I always check you before I buy anything.
Thank you!
Just picked up a vac today. I was standing in lowes watching this video before I left with a craftsman lol. I got the one that can also be used as a leaf blower which I did t even know it did that until I got home.
@@vonhousin4179 hope it works out well for you. Yeah the exhaust on these is pretty strong. I never used it to blow leaves I had a leave blower but now I have a condo. Lol
The one test that can't be practically done: longetivity. My Craftsman is going still doin' the job after 18 years (although admittedly, not much wet work).
I also chose Craftsman, back in 2007. Still going strong. It replaced my Ridgid from 2002, that just didn't have enough suction for some jobs.
Aw, hoping for battery operated vacs
I can do those too if there's enough interest. I'll check back for "likes" as well as suggestions for brands
Same
Project Farm i second this and think the dyson v10 should be one tested, I own one I think it’s pretty great but I don’t know if it’s really worth the £350 it costs.
If you test these, definetly include xiaomi!
I’m interested to see Milwaukee’s new brushless m18 and m12 battery powered vacuums that are soon to come out
I remembered to check out your review prior to purchasing a replacement wet/dry vacuum. After watching, I will go with the DeWalt for performance and brand name reputation. Your analysis was professional and complete. You should have you own TV show. Thanks for your efforts.
Thanks and you are welcome!
I LOVE that you get to the point! Each category, each test, you give it to us straight and then move on. Thank you!!! (I hate when other youtubers just ramble and fill time)
You are welcome!
Agreed, not to mention the others cheesy music and inserting their “style” into it.. Straight to the point and you keep it moving.. Well done sir!!!
he spent $752.83 dollars just to show us what shop vacuum we should buy
I love that he gets right down to the point in his videos
Thank you!
He's no doubt doing pretty well with monetization. So technically, WE are paying for it with the ads we see. That said, I love his stuff.
His channel actually isn't monetized. So you shouldn't be seeing any ads. The money he makes all comes from donations.
Project Farm: Which shop vac is best
UA-cam: Here's an ad for Shark Vacuums
Smart
An important test would be to pull the vacuum around by the hose over various surfaces to see which ones are the most stable. My pet peeve is “tippy” shop vacuums.
Thanks for posting so much great content. Love your channel!
indeed
I've got a Ridgid HD1200 12 gallon and it has a wide base for the 4 casters. Sometimes it's too big to roll into some places. It's much better than my old shop vac.
Just add some weight to the bottom and maybe better wheels.
Yes! Huge pet peeve of mine too. It's such a hassle to reset the vac after a topple
I can't believe you resisted the title "Which Shop Vac Sucks the Most?"
Thanks for watching.
😂🤣
@EFormance Engineering
Yep, PF would be on the cusp of YT legends.
Would the winner be the one that sucks the least or the one that sucks the most?
@@GreeceUranusPutin LOL yea.
Sad that the current owners of YT have no sense of humor, they'd probably give PF
a demerit for doing so.
Awesome comparison. I was about to buy the rigid but I guess I’m going for the craftsman now! Thank you so much for taking the time and the resources to create an in-depth and unbiased comparison!
You are welcome!
The final match reminded me of the time when my wife and I both caught hay fever in a train with only 2 tissues......
lol Thanks for watching.
Love this channel. Straight to the point, not trying to sell me anything, and great edits! This guy is all business
Thanks!
To be fair, the "Assembled in USA" seems pretty true since YOU assembled nearly all of it.
lol Thanks for watching.
Truth!
Who else liked the video at the start of the video.....because....it Project Farm!
Thank you very much!
I agreed.
Me 👋🏽👍🏽
@@ProjectFarm man, thank you for all you do. Hopefully soon product manufacturers will start putting "project farm approved" or something similar on their packaging. That'd be awesome!
If Project Farm ever has a yard sale, I want to be there!
Don't buy any lawn mowers
I just wanted to say thank you so much for that video. I have a rigid vacuum with a lifetime warranty and watching your video. You reminded me that they do have a lifetime warranty without this video. I would not have been able to bring the vacuum back to Home Depot and get a brand new one. This next vacuum is on Home Depot, thank you so much for the video
You are welcome!
Test idea: antifog sprays/diy solutions. This is for everyone who wears glasses and a facemask of some kind, including firefighters, surgeons, etc. Thanks!
Thanks for the video idea.
I wear glasses, I support this.
my covid mask always fogs my glasses I recently (yesterday) had to go to the ER and had that foggy thing on all day
@@chamisi I hope.that you are feeling okay. Visiting the ER is never a good time.
I wear glasses but no facemask, so I don't have that problem.
These “horsepower” numbers vacuum companies use are a total crock of poop
If one lies the rest have to aswell., to avoid unfair competition...
It’s basically it’s rated start up or peak HP.
But once the motor gets up to speed it takes very little HP to maintain motor RPM.
for real, what about the capacity!? 16/14 gal what a load of BS
Most amount of crap is either shop-vac HP, or air compressor CFM output. Compressor companies rate their compressor’s air flow at 1atm, while tool companies rate tool air usage at 90psi.
Yea, reminds me of amp hours on batteries. They basically just write random numbers
The power cord went out on my 20+ year old Ridgid, and they sent me a complete new vac.
wao
How
Nice! Thanks for watching.
@@uuuultra UPS?
That’s awesome! Makes me glad I bought a Ridgid!
Thanks for listing the noise (dB) levels. After decades my old, but quite, shop vac had to be replaced by one I purchased at Home Depot. It also is LOUD like the Shop Vac brand. I contacted the company who affirmed that dB level.
Huh... who would've thought that a giant motor and fan that's essentially a leaf-blower attached to a bucket would be loud?
Well technically the ShopVac **was** assembled in the USA 😂
Technically, they all were since you do the final assembly!
lol Thanks for watching.
That's the one I bought on Black Friday, great....last place.
Jon Sepueda r/thatwasthejoke
me: yes shop vacs! time to see the superior power of my ridgid!
also me 10 mi later... damn it
I got a 10 gallon in my work space, but I'm getting hungry for that Bauer just looking at it slay the other brands. The 90 day warranty make speak to some potential quality control issues tho
Slaughtered... 😂😂
@@Blackobluna You can buy a longer warranty and compare prices accordingly.
Right!? I thought it was going to clean the floor with those harbor freight specials... I'm very surprised
This comment alone is a lesson about marketing.
you litterally are my argument everytime i go to buy any tools i need, i love your channel thank you for your service of product testing
Glad to help!
wow what an excellent review. I love the objective tests that show clear metrics. Much better than some of the subjective reviewers out there! I very much appreciate the time taken to conduct the test, as they were factors when deciding to purchase my first shop vac.
Project Farm: How could we test shop vacs?
Me: biggest succ
lol. Nice!
S U C C
But 2020 S U C C S the Most
S U C C
Mmm succ
"what did you do today honey?"
"nothing, just some vacuum suction fights in the garage"
lol Thanks for watching.
😂😂😂
Watching this I was most impressed with Craftsman honestly. Though somehow I felt bad for it during the 3 bucket segment where it seemed to throw up the excess water. Awesome video and awesome effort!
Thanks so much!
Thanks Todd, another great review as usual. I bought the DeWalt after watching this. I got the smaller 6 gallon version. It's truly amazing.
You are welcome! Nice!
One of the few channels I can upvote before watching the video.
Thanks so much!
Needed a shop vac with strong suction for cleaning out gutters, and I knew your channel wouldn’t disappoint. Went and got a DeWalt after watching, thanks for testing!
Can't go wrong with DeWalt. Best !
I bought the same. Lots of power, but VERY LOUD.
@@flat-earther . Unfortunately, the new Dewalt is way louder than my old shopvac brand. I wonder if they changed the design since this test was done.
It would have been interesting to see replacement filter costs by brand and/or the optional acceptance of filter bags.
Keep up the great work
I love watching these just to see what methods of testing he comes up with. It's like watching MacGyver, he explains everything in good detail so your actually learning more than just which product is best. Very satisfying! Excellent value for $5 a month patreon.
Thank you very much!
Great video. Maybe a durability test. Start them all, last one standing wins. I use a shop vac for dust collection in my shop and leaving it running for an extended time happens frequently. Extended run time without fear of fire or destroying the vacuum is a major factor. Thanks for ALL your great videos.
Thanks! Thanks for the suggestion.
Yes this is true.
This is a great idea. A few years ago I had a Rigid that accidentally got turned on when I was out of town for a couple days. It died while I was gone, which surprised me. It was about 5 years old and didn't get used that often, but could not take being continuously on for maybe 48 hours.
@@danschroeder4274 But wait -- how did it get turned on when no one was around?
👻 yeah, I think you have more important issues than a burnt out vac.
I knew this episode would suck!
I'll see myself out...
Great job, as usual, Todd.
Thanks for watching. It was interesting to see how each vac tested!
I never thought shop vacuums fighting, would make me laugh.
lol. Nice!
That's some white guy humor right there!
I don't think I would have been bright enough to think of that type of test
Not gonna lie, The Bauer surprised me.
That said I have a Rigid I bought on a bit of a whim. It is a 16 gal and doesn't have the blower attachment and honestly has been incredibly good. It doesn't seem to suffer from the same design problems that one did as its lid and bucket are quite snug.
i got a ridgid that was on sale for $40
Some other guy said he got a replacement vac for his 20 year old ridgid. IMO if they're really doing their lifetime warranty it's well worth it.
Thanks for the feedback.
I got my ridgid out of a dumpster 5 years ago. Been beat to hell and back, rained on, etc and is the best damn vacuum I've ever had. They are really tried and true.
I had my rigid burn up on me after a couple of years. Sucking up baking soda was the last straw. I'm sure some of it was my fault, but still expected better performance.
I had an Old School Shop Vac for years. When it finally conked out on me, I bought another one. I was disappointed in the decline of quality. I'm glad I got to see this review. I am going to invest in a Dewalt. Mine gets used hard for construction clean up. I would have liked to see how they do picking up nails, drywall dust, wood scraps etc. Drywall dust clogs up a filter fast which reduces suction. It would be interesting to see which one lasted the longest with drywall dust.
Thanks for sharing. Thanks for the suggestion.
I'm also slightly disappointed in my new shop vacs performance, but I think it's due to a smaller hose diameter then my old one. However, im still glad to be supportive of a brand that's contributing to USA jobs instead of outsourcing.
@@justinpennington7682 What are you even talking about? Your comment literally makes No sense what so ever.
“Warned for unsportsmanlike conduct”lol! I just about pissed myself laughing.
The razor sharp wit of PF Guy.
This is one of my favorite channels. I am always so satisfied by your methodology, however, when you were measuring the suction force on that ball, the different surface area (hose size) will greatly increase the force measured for a given pressure created by the vacuum. Much respect, keep up the excellent work!
Thanks, will do.
PF is semi-scientific. Far too many variables to work out on that particular test (leakage, hose surface, wind speed, etc., etc.). But the ball size never changed which did give him a constant to work from.
Again Project Farm proves it is *by far* the best channel on UA-cam. Excellent, *thorough* review as always. Not only was it informative, it was entertaining! :)
Thank you very much!
I was in the market for a shop vac and was so glad that you made this video. made me confident about my choice.
Thanks! Glad to hear!
Difficult to put into words... your videos are the Tool Time "argh-qrgh-argh" .... I really enjoy them. I'm the nerdy computer guy with glasses, pocket protector & briefcase (well.... when I was 18, anyway). I really enjoy them, as I "studiously" take notes on the, "man, if I ever buy another vac, it's gonna be a ". Thanks for all your time & effort on these.
You are welcome!
“3 year warranty. We’re going to test that!”
Thanks for watching.
I just purchased the Craftsman thanks to your testing, I'm excited to put it to use! I also was able to purchase it at Ace Hardware for only $107 and that's including taxes. The regular price was $110 and I paired it with a 10% off coupon. Thank for your videos!
Awesome! Thank you!
Another great video from the most trustworthy gentleman on the internet. If you are looking for a new product, there is no better place to come to see products demonstrated with tests you would never even think of. Honesty and no bias here.
Thanks!