What brand headers were these? And did u have a codes go off eith o2 spacers also the down pipe what brand ? And finally did those gaskets hold or did they leak at all i often think those after market gasket arent as good as oem? Wonder if u could use a new oem gasket or if u do need to use the ones that come in the kit!
Just eBay off brand, I did not I used 02 sensor spacers for the 2 back sensors and it by passes it so codes don’t show, the gaskets for the bottom aren’t good but header ones are fine
@@progressiongarage7332yeah lol... a little air restriction is good. I got a dna exhaust but I dont wanna take off any cats. Still thinking about a header
Bro ive done this job at least 6 times cus my headers are messed up from dna and i went back and forth i take the exhaust manifold from on top u gotta twist it left and pull up
Recently the company that produced the headers sold out and hasn’t restocked their distributors. Hopefully they restock soon because I’m trying to get them too.😂
I HAVE a question will that downpipe fit on a 94 GS300? I can't find parts for my car anywhere. Someone told me a 98 GS downpipe would fit ,what you think anybody?
@@abebibiano3149 if you are being serious I’d say you should do A LOT of research before getting yourself into it all lol. Tune is changing your cars ECU (computer) to work with the new part. Make sure you research a good tuner in your area don’t go with some random, it could destroy your car lol. If you were just joking Imma feel dumb asf but there ya go 😃
Bro the reason it sounds like shit cus its straight pipe it dont sound good that's why im gunna keep my stock muffler and full straight pipe from headers to resonator delete
Take off the silencer on the muffler and it’ll sound better, trust
Thanks for the input! But car is sadly sold.
@@progressiongarage7332 you sold it for how much my guy
@@johhny_sins4135 like 3k I believe
THANKS CHEERS FROM AUSTRIA MATE
What’s up mate! Salute’s!
@@progressiongarage7332 Cats are for virgins
Can you put a link for the headers spacers and downpipe
Link is in Description
Get a oem is300 resonator it should help it sound better and you get a less raspy sound
Thanks for the input bro! But car is sold
What was the point of buying the 02 sensor spacer if your still gonna have the check engine light ?
It’s a hit or miss
The 90 degree spacers also helps with the o2 sensor fitting in the rear one so it won’t hit the frame
*Can anyone tell me does the outlets of the manifold connecting to the cylinder suppose to be uneven?*
Did you install 90 degree spacer in the front after the video to get rid of the CEL?
Only on the downstream sensors not the front ones
Do you have to put any other gasket on the Downpipe of the header like the circle ones plus that one that it came with ?
What brand headers were these? And did u have a codes go off eith o2 spacers also the down pipe what brand ? And finally did those gaskets hold or did they leak at all i often think those after market gasket arent as good as oem? Wonder if u could use a new oem gasket or if u do need to use the ones that come in the kit!
Just eBay off brand, I did not I used 02 sensor spacers for the 2 back sensors and it by passes it so codes don’t show, the gaskets for the bottom aren’t good but header ones are fine
@@progressiongarage7332 the downstream has to be connected to something
Great content. Thanks for the help. I'm building my own lexus along with you. Aloha from then 808.
No problem, and thank you!
Put the stock ypipe back on. And get a mild exhaust with the stock resonator. Too much straightpipeness
Don’t have the pipe, car came like that, but yeah I know just did it for the video and that stock cats lol
@@progressiongarage7332yeah lol... a little air restriction is good. I got a dna exhaust but I dont wanna take off any cats. Still thinking about a header
@@seoesalpha3889 i only have the dna header on mine. imo its better to just replace the manifold and keep the rest of it stock
Bro ive done this job at least 6 times cus my headers are messed up from dna and i went back and forth i take the exhaust manifold from on top u gotta twist it left and pull up
The dna ones suck lol I took mines off
@@supershadow230 why did they break?
Lexus 01 naw I needed smog
Lexus 01 they were leaking
@@supershadow230 where they leaking? i had the same issue
Did your coil packs and plugs go bad? And wear do you put the up and down stream wires?
No they did not, and put them on stock locations
Why do all of those links come up empty?? 🤔
Most of them are eBay links, sellers probably don’t sell the item anymore
Recently the company that produced the headers sold out and hasn’t restocked their distributors. Hopefully they restock soon because I’m trying to get them too.😂
I HAVE a question will that downpipe fit on a 94 GS300? I can't find parts for my car anywhere. Someone told me a 98 GS downpipe would fit ,what you think anybody?
It’s the same engine so I would see why not but not 100% sure
Wish I can do this in California, might not pass smog smh
Yeah probably won’t unfortunately
You can pass just gotta know the right people 👀
Any CEL come on?
Running open headers will I need to do a tune?
You don’t need one, but to actually get the performance out of it a tune is needed
@@progressiongarage7332 what is a tune and where can I get one done?
@@abebibiano3149 if you are being serious I’d say you should do A LOT of research before getting yourself into it all lol. Tune is changing your cars ECU (computer) to work with the new part. Make sure you research a good tuner in your area don’t go with some random, it could destroy your car lol. If you were just joking Imma feel dumb asf but there ya go 😃
@@stanfordbrown834 being serious
Bro the reason it sounds like shit cus its straight pipe it dont sound good that's why im gunna keep my stock muffler and full straight pipe from headers to resonator delete
Haha yeah thinking of fixing the catback, still don’t know 🤔 lol
Don't sell the stock headers. Keep them. Just got a ticket for loud exhuast. Now I need to swap everything back to normal.
Not really worried about it bro since I’m not keeping the car, but thanks for the input!
@@progressiongarage7332 oh ok.
So the o2 spacers didn’t work? You shouldn’t have a CEL.
No they didn’t work, sometimes it’s just a hit or miss on them 🤷♂️
@@progressiongarage7332 which locations did you put them at?
@@carlbrooks90 both in the rear so 1 on bank 1 sensor 2, and bank 2 sensor 2.
Did you notice a difference in power going headers straight pipi
Not really, only feel a difference if you tune it