Wow I was looking at all the crappy ones on Amazon that would only kind of fit at best and this solution is worlds better for what I'd need it for, thanks for sharing!
So glad I saw your video! I had been brainstorming for a solution that didn't break the bank or require drilling holes and mounting something to the boat permanently, and this is the ultimate answer. I will be making one for my 12 foot jon boat this weekend. 👍
@@Sk8Riffer - I made it today. I liked it so well I'm gonna make another for the front of the boat tomorrow, and use the 10 inch pneumatic swivel casters so I can steer it. My boat is the same width as yours, only 12 foot long instead of 10, and with a 1/4" plywood floor covered in camouflage foam. I also have a 6hp 4-stroke outboard, a 3-gallon tank, a 30lb thrust trolling motor, a lightweight LiFePO4 battery, and either one or two clamp-on swivel seats, depending on whether or not Wifey or a friend tags along. The boat loaded with everything weighs approximately 275 pounds, but it is rare that I end up taking everything along. Most trips don't require the heavy outboard and fuel tank. If I am interpreting the specs correctly, every wheel is rated for 300 pounds, so four wheels = 1200lbs, meaning I should be good even if I do bring everything, at least on fairly smooth ground and if I am careful to distribute the weight evenly for the trip to the water. If it doesn't work out, I know my old self can at least manage the 125lb empty boat better, or maybe even the boat and just the 52lb outboard motor. Everything else is easy enough to carry, even if I must make several trips. Anyway, thanks again, and wish me luck!
I made the front ones. It all works great. I can push the boat along very easily, even for long distances over less than perfect terrain, even with everything in it. The only issue is that putting them under the boat is a two person job, because they fall over if someone isn't holding them in the upright position till the boat's weight comes down on them, and one person just can't pull it off. No big deal. Probably gonna just build "kickstands" from short pieces of bent all-thread rod and attach them to the boards with a couple of U-nails so they can flip up and down as needed. once the boat is on them it is very easy to strap them on.
That's a cool idea! I was looking for jon boat dolly ideas where you don't have to drill holes in your boat. Not only does this fit that bill but it'd half the price at least of a regular dolly
Man, what an awesome idea. Gonna build one this weekend, really gonna help when going fishing with the kids, at least until they are old enough to lift the other end haha! Thanks for sharing man.
@@Sk8Riffer Really gonna help me with the 14' boat haha! Wish harbor freight sold those casters with a solid tire, just be one less thing to worry about but I guess you can't really complain for the price.
@@FreedomFishing so I use it just to get down to the water. My local isn’t really a proper launch, it’s more rocks and mud. I’ll usually take it off right at the water and push the boat it. It’s on muck so it doesn’t do much damage to the bottom of the boat. If you scroll through my latest vids, I did a ton of upgrades to the Jon boat including hurculiner on the bottom, so that also helps protect the boat
Ive been thinking of a way to mimick the wheel kit they sell online that bolts to the back of the boat but didnt wanna drill anymore holes into my 12ft jon boat, this is so simple and genius! Will definitely be using this idea brother, thank you!!!
Perfect! Can't believe I found this. Many thanks!!!
Wow thanks! So simple! And SMALL!
Really nice and easy as well. Thank you
Nice!. Thank you. Gonna build mine this weekend for my 12' Jonboat. My back thanks you too!
Wow I was looking at all the crappy ones on Amazon that would only kind of fit at best and this solution is worlds better for what I'd need it for, thanks for sharing!
I tried it and my eye lid screws came out lol 😂
@@Spinn1ng_Gorilla I've been using mine for weeks and hasn't yet given out even over some rough terrain, just need better screws 😉
just what i needed! thanks
Dude! Thank you! Amazing job!
Great idea because I have a truck launch jon boat that we have to carry to the water when we go out.👍👍👍
Perfect! This thing has worked amazing so far
Simple and cheap solution -- thanks!
Genius my man. Pure genius
I try
Was not aware of the existence of castor wheels that large. 🤷♀ TOTALLY will be using your idea for my sailboat dolly ... many thanks!!
Cool! It really has been a huge help
I love it. So simple! Thanks!!
If you center the dolly it will be even easier.
I built mine 5 years ago still going but I am looking to make another.
Building it soon, thank you I’ll let ya know how it goes, 😊
You're the man stan!! Thanks
Hell yeah, I’m making one this week. Way better than Amazon bs.
So glad I saw your video! I had been brainstorming for a solution that didn't break the bank or require drilling holes and mounting something to the boat permanently, and this is the ultimate answer. I will be making one for my 12 foot jon boat this weekend. 👍
Awesome! It really is the best way to transport it. Good luck!
@@Sk8Riffer - I made it today. I liked it so well I'm gonna make another for the front of the boat tomorrow, and use the 10 inch pneumatic swivel casters so I can steer it. My boat is the same width as yours, only 12 foot long instead of 10, and with a 1/4" plywood floor covered in camouflage foam. I also have a 6hp 4-stroke outboard, a 3-gallon tank, a 30lb thrust trolling motor, a lightweight LiFePO4 battery, and either one or two clamp-on swivel seats, depending on whether or not Wifey or a friend tags along. The boat loaded with everything weighs approximately 275 pounds, but it is rare that I end up taking everything along. Most trips don't require the heavy outboard and fuel tank. If I am interpreting the specs correctly, every wheel is rated for 300 pounds, so four wheels = 1200lbs, meaning I should be good even if I do bring everything, at least on fairly smooth ground and if I am careful to distribute the weight evenly for the trip to the water. If it doesn't work out, I know my old self can at least manage the 125lb empty boat better, or maybe even the boat and just the 52lb outboard motor. Everything else is easy enough to carry, even if I must make several trips.
Anyway, thanks again, and wish me luck!
I made the front ones. It all works great. I can push the boat along very easily, even for long distances over less than perfect terrain, even with everything in it. The only issue is that putting them under the boat is a two person job, because they fall over if someone isn't holding them in the upright position till the boat's weight comes down on them, and one person just can't pull it off. No big deal. Probably gonna just build "kickstands" from short pieces of bent all-thread rod and attach them to the boards with a couple of U-nails so they can flip up and down as needed. once the boat is on them it is very easy to strap them on.
@@ralphcantrell3214 yeah that can be an issue if the boat is big. Mine works fine for just one person luckily
definitely gotta do this now, heck yeah thanks for the awesome vid
NICE JOB! That was supper helpful. thanks
Glad it helped 👌
nice work man!
That's a cool idea! I was looking for jon boat dolly ideas where you don't have to drill holes in your boat. Not only does this fit that bill but it'd half the price at least of a regular dolly
Yeah man, it’s been a major help!
Man, what an awesome idea. Gonna build one this weekend, really gonna help when going fishing with the kids, at least until they are old enough to lift the other end haha! Thanks for sharing man.
Heck yeah! This thing has helped tons 💪
@@Sk8Riffer Really gonna help me with the 14' boat haha! Wish harbor freight sold those casters with a solid tire, just be one less thing to worry about but I guess you can't really complain for the price.
buy a jon boat soon but was worried about moving it around. This will be awesome
Good luck!
Best idea out there man! 🤙
Just used mine yesterday 💪
@@Sk8Riffer Heck yeah! I'm gonna go run it as well! Do you launch the boat, then spin the rear to shore, and then unstrap it?
@@FreedomFishing so I use it just to get down to the water. My local isn’t really a proper launch, it’s more rocks and mud. I’ll usually take it off right at the water and push the boat it. It’s on muck so it doesn’t do much damage to the bottom of the boat. If you scroll through my latest vids, I did a ton of upgrades to the Jon boat including hurculiner on the bottom, so that also helps protect the boat
@@Sk8Riffer right on! I'll check em out.
Ive been thinking of a way to mimick the wheel kit they sell online that bolts to the back of the boat but didnt wanna drill anymore holes into my 12ft jon boat, this is so simple and genius! Will definitely be using this idea brother, thank you!!!
Nice design! Thanks!
Have fun!
yep, beats cutting, drilling, and the time putting it together if you live on a lake. thankyou!
Not all of us are the lucky 😂
wow good idea
Great idea, Love it! (:
Thanks amigo!!!
Thank you bro
Brilliant
Genius
Great idea! Do you leave the wheels strapped on when going into the water? Or do you detach then?
Detach and leave it in the truck
looks like the wheels would collapse dragging it over the beach
@@seanvan6377 yeah probably not the best for sand
🇺🇲👍👍💯🇺🇲