Fails You Can Print Yourself! - PrintFixFriday 141
Вставка
- Опубліковано 4 лип 2024
- We’ve got fails in multiple senses of the word in this week’s #PrintFix Friday! A couple types of fancy filament cause some issues, a Bambu bed is back and better, and we go over small holes in prints! PLUS someone in our community designed some cursed prints we want to show you!
What’s your favorite useless print made by Devoid Colossus? Let us know in the comments!
Go check out the creators in this video:
/ 1791012610994794755
/ 1792162437581390077
/ 1792105075126493527
/ small_holes_in_3d_print
Links:
Devoid Colossus's Cursed Models: www.printables.com/@DevoidCol...
Cards:
RMRRF Episode With 3D Printy: • 3D Printing BRAILLE an...
Making Filament at Printed Solid: • Making CUSTOM FILAMENT...
Touring Printed Solid: • From Raw Material to 3...
PrintFix Friday 140 (With Omaha 3D Print's original fail): • Bambu Blobs, Beds, and...
Z Offset: • How to get PERFECT Fir...
0:00 Intro
0:42 3D Printy Prusa XL Clog: After marble filament clogs a Prusa XL, the next filament does a respectable job trying to recover.
3:37 Polyalchemy Elixir Lines: A model of Jar Jar Binks in some very rare filament has some lines on it.
7:39 Prusa XL Perimeter Lines Not Fusing: Some lines of filament on the corners of a print have connected opposite walls.
10:42 Omaha 3D Prints Bambu Bed Update: An update on a fail from last week!
12:06 Devoid Colossus's Uncomfortable Mugs: Some heinous 3D models from a community member.
13:10 Small Holes All Over Back of Print: A person is having trouble with a very rough finish on their print.
14:02 Outro
🎁 Support us directly on Patreon! 🧡💯 / 3dmusketeers
🎁 UA-cam Channel Memberships! 🧡💯 b.link/YTmembership
🎁 Join our Discord Via Paypal (or the others)🧡💯 b.link/10Paypal
🛒 Shop Amazon with our Affiliate Code: amzn.to/3hrzVcL
🛒 Shop GreenGate3D with our Affiliate Code: b.link/GreenGate3D
🛒 Shop Prusa with our Affiliate Code: shop.prusa3d.com/#a_aid=3DM
🛒 Shop Slice Engineering with our Affiliate Link to save some 💰 💰!! b.link/Slice-Engineering
Want Great Royalty FREE music? Choose Epidemic Sound: b.link/EpidemicSound
____________________________________
Keep up to date by following us here!
Website: 3DMusketeers.com
Twitter: / 3d_musketeers
Facebook: / 3dmusketeers
Instagram: / 3dmusketeers
LinkedIn: / 3dmusketeers
Email: UA-cam@3Dmusketeers.com
#PrintFixFriday #PrusaXL #PolyalchemyElixir #NozzleClog #PETG #CoolingIssues #Cursed3DPrints #ZOffset #PrintOffset #BambuLabX1Carbon #PrinterRepair #3DPrintFix #PrintFix #3dprinterfix #3dmusketeers #smallbusiness #tampa #3dprinting #additivemanufacturing #fails
FTC Disclaimer: A percentage of sales is made through Affiliate links - Наука та технологія
@3D Musketeers, Grant, I would like to thank you for your videos, they have helped me immensely. I am sorry I am not on any social media platforms, other than youtube, as I would SHOUT out to the world about your channel. I also wish I could retain all the information I have gleaned from your videos (old age thing, lol). KEEP UP THE GOOD WORK !!
Thank you!
6:07 Check the speed layer view in the slicer too. I always say to check the temp, speed, line width, cooling, and other layer views so you can compare them to the print results to see if anything matches up.
A vid on how to make my bed would be greatly appreciated!
So I got the wham bam nozzle cleaning kit yesterday. I haven't used it yet. Maybe today. I guess I'll stick the nozzle back in the oven again. lol
sweet! Good luck!
As always, thank you! I've had that same issue with PETG! Please do a bed prep video!!! Most people know about glue sticks by now, but there are other things that work as well and are easier to use and clean off!
12:48 oh fuck off 😂 that was just too funny🤣
The second one; I print mostly in PETG, get some odd effects however
One print I've been doing a lot of lately is printing 1x2mm thick, 25mmx330mm rods in vase mode, (a project, part of a huge water sculpture)
The problem I ran into is that cooling ruins the layer adhesion (and waterproofing). I not only had to slow the print down to 5mm/sec, but also print at an ungodly temp of 180C (recommended 230-260C) for the laid layer to have enough stiffness to not deform when getting tugged around by the print head on the active layer.
Granted, this might not work out so nice for that bin, underlayer cooldown being much better with a larger print
6:13 I reckon it could be the spool being restricted, snagged on something and having to pull harder?
Call me what you will, but, I love those cups.
Me, too. I (remotely) witnessed their build and was ecstatic to see them come alive! There is an awesome dual-champagne flute that also needs printing.
Print them for others lol
Hmm, would raising the temperature actually help or hinder with filled filaments? By raising the temp you are lowering the viscosity, that could cause the material to flow around the granuals and leave them behind, clogging even faster. Also baking the filament while that head is parked, so more carbonization to help cause a clog.
@3:40 the layer below the ridges are closer to the nozzle probably around 0.05mm . the nozzle is therefore closer closer to the nozzle and the filament squishes out the side making the ridge. why is the layer closer to the nozzle? that is the real question. maybe a tolerance issue with the mechanics of the printer. I'm willing to bet it's the filament itself that is warping up on the edges. lots of smooth curves and steep chamfers on elastomer type filament (silk and tpu) really makes the layers pull inward and curl up the edges a small amount. the print edges will have those ridges or in extreme cases the nozzle will push in the ridge and print over it making large divits in the print surface
the Jar Jar one, likely the filament is hanging up somewhere as the print head gets closer to the top?
good thought! Will check!
4:20 Jessie Chrome Zephyr is a good name. Zephyrus was the god of the west wind and the messenger of spring in Greek mythology.
We are almost in June and Printed Solid still does not have Elixir for sale.
They are still perfecting the recipe. They had some spools for sale in the winter that were test batches. Big things happening there!
Those mugs...
right?!?!
My glorious creations made it to a video!!
And we all hate you for it lolol