SEAT LEON MK3 - How To Remove The Car Battery Removal Replacement 2013-2019

Поділитися
Вставка
  • Опубліковано 15 жов 2024

КОМЕНТАРІ • 17

  • @SelectVehicleSpares
    @SelectVehicleSpares  3 роки тому

    Tools used:
    -10mm Socket & Ratchet: amzn.to/2NWrfON
    -13mm Socket & Ratchet / Extension: amzn.to/3luPyQv

  • @wassiliproductions
    @wassiliproductions Рік тому +2

    Thank you for the tutorial. Often seems very straight forward but always nice to check before doing it yourself!

  • @TheNitonman
    @TheNitonman 2 роки тому +14

    You should remove the negative lead first and connect it last when refitting.

    • @kadirtas6280
      @kadirtas6280 9 місяців тому

      Kesinlikle katılıyorum. Önce negatif daha sonra pozitif çıkarılmalı

  • @hhcollective
    @hhcollective 10 місяців тому +1

    I've been told by seat that it's £200+ to replace my battery and have the required coding done.
    I've changed batteries a few times, pretty straightforward but do you know of any coding required for the vehicle after a battery change? First I've ever heard of it.

    • @fireblade8905
      @fireblade8905 10 місяців тому

      No. What happened?

    • @flameroo
      @flameroo 9 місяців тому +1

      If you change to a different style battery from AGM to EFB or vice versa it needs to be coded in so the battery is charged correctly. Will still probably work fine without but might affect the life span of the battery if not coded correctly.

  • @MariusXMelisa
    @MariusXMelisa Рік тому

    I did that, and now my steering wheel controls don’t work, only the horn. What should I do?

  • @peterjackson8409
    @peterjackson8409 3 роки тому +1

    What about car alarm and radio code? Always concerned that reconnecting won’t automatically make these work. Do you still need a 12volt auxiliary feed to protect codes???

    • @SelectVehicleSpares
      @SelectVehicleSpares  2 роки тому +1

      On our vehicle there were no codes required when the battery was re-connected, we haven't seen any Leon Mk3's that required a code.

  • @treetrunk48
    @treetrunk48 Рік тому +1

    Do you have get Seat to reprogram ecm as a new battery is put in

  • @aidenjackson1554
    @aidenjackson1554 Рік тому

    Hello. Would you recommend to disconnect my battery on my Leon Fr 2017 (it’s stop/start) since I won’t be driving it for 4 months? Will it effect anything when I come to drive it again? Thank you

    • @SelectVehicleSpares
      @SelectVehicleSpares  Рік тому

      There shouldn't be any need to disconnect it, but if you do then you may get a few warning lights when the car is started back up. In our experience these go away after a few hundred metres of driving the car. We would recommend a battery charger over disconnecting the battery.

  • @Nadk2010
    @Nadk2010 4 місяці тому

    Same for cupra 290?

  • @Tokosaba
    @Tokosaba 2 роки тому

    Hello! should i disconnect or remove my car battery when not in use? Mk3 with Start Stop. 1-2 week standing