Make A Metal Drill Press Vise Without Welding | DIY Homemade Drill Press Vise
Вставка
- Опубліковано 14 гру 2021
- This time I'll be making a simple and heavy-duty metal drill press vise without welding. This is a DIY metal project so it could be made by anyone who knows how to work with an angle grinder, drill, and tap.
DIY Fractal Vise Jaws From A Gear Teeth - • Upgrading a Bench Vise...
Music by Epidemic Sound (www.epidemicsound.com)
Due to factors beyond the control of WellDoneTips, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. WellDoneTips assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. WellDoneTips recommends safe practices when working with the tools or equipment seen or implied in this video. Due to factors beyond the control of WellDoneTips, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not WellDoneTips. - Навчання та стиль
This UA-cam Channel is better than most. I love the fact that this craftsman makes tools without welding. Many of the channels assume that everyone craftsman has access to welding. You can see that this person is a craftsman, not just another UA-cam hack. Well done.
Absolutely brilliant WDT, first class engineering and re-purposing. Love it.👍
That's a beautiful vise, I like it more than my cast iron drill press vise of the same size. 1 thing I would change, and already changed it on my purchased vise: The pivoting handle lever was a pain to use. I found it slow to turn, and was always grasping to find it or turn it the right direction. So I replaced it with a small crank handle, now I love it.
Beautiful, but forbiddingly heavy and accordingly clumsy to handle. And non-yielding positioning on the drill's base looks pretty awkward.
This is a great example of how to make stuff without a welder. Thanks for the video!
Excelente tutorial , la súper/prensa ,un trabajo magnífico , gracias por compartir tanta creatividad y conocimientos , un saludo cordial y por supuesto un gran like desde Narón , Galicia (España)🤓 😜
Excelente, un hermoso y preciso trabajo. Una joya de un taller. 👍
Simply SUPERB Videography ! Not a single second of camera defocus anywhere even with such close up shots !!!
Anytime you use something you built with your own hands it's 1000 times more satisfying than using something you bought. Excellent design.
This vise is better constructed than ANY cast iron drill vise in its class. The materials used are far superior.
I really like it, I do not have a grinder yet, but I will buy soon and make a similar vise. I think the model you built fits 110% to my needs. Thank you very much for posting that nice video. I already subscribed.
Brilliant design and beautiful craftmanship 👍🏼
Excellent build! Thanks for sharing.
Merecidísimo like maestro!
Gracias por compartir y saludos cordiales desde Reynosa Tamaulipas México!!!
I loved this build. Apart from being functional it was beautiful. You have some good angle grinder cutting skills.
I just subscribed to your channel I really like your work its neat and professional looking . Another reason to build your own tools is the pride of making something yourself that will be around for generations to come. I look forward to seeing more of your projects. Really nice work brother.
That's actually pretty nice! Great build!
Displayed great craftsmanship and integrity.
I'm impressed. I am getting into machining and this is a great demonstration. It's the kind of inspiration that gets the creative juices flowing. You earned my sub. Cheers from Wisconsin.
Very well executed, absolutely neat 👌🏽
That is absolutely BRILLIANT...
Very enjoyable. Thank you showing a non-welded version.
Awesome work!! Thank you for sharing.
Your handle - WDT- says it all. Very nice.
Bloody Yippa M8, Will make my own also. Yeh, it might be cheaper to buy one, but, If you make it yourself, you have the pride and satisfaction of knowing it was made by YOU.
Excellent job. Very clean and neatly done. I will watch for more of your projects.
You are a mechanical Genius!👍love it.
Very nice project, especially for those who do not have a welder, or a lathe. Careful handwork. I also agree with your statement as to why not just buy one. This is the kind of project that gives you practice in measuring, filing, cutting, finishing. Is this a vise one is going to put huge amounts of force on or beat on with a hammer..? NO...! But on a workbench where one needs something sturdy fairly heavy, and easy to maneuver, this fills the need nicely. THANKS for sharing.
Great video. My test piece as an apprentice engineer in fitting was to make a precision machine vise using only steel flat stock bar, a hacksaw and files, a rule to mark out and drill/ream holes using a pillar drill. Oh and a lathe to screwcut the leadscrew!
What's an apprentice engineer?
You made the screw yourself? That's so cool!
Love this! I watched this months ago! Now I can come back and support. Thanks for this.
You are an artist!
Fantastic build. Well done.
Great job. Very creative. Well done. Thanks for sharing.
Excelente trabalho !!!
Why buy it when you can have the pleasure making it. Nice job !!
Yes I agree, it absolutely brilliant.
Very elegant. Only seconds of viewing were needed before I knew that you are my kinda craftsman/engineer. Subscribed immediately!
Now, can you show us how you will make another beautiful vise using the Kurt Angle-Lock idea, much obliged!
Bravo sir! Well done!
Boa noite amigo, eu estava precisando muito dessa dica da Esmerilhadeira, muito obrigado
Now that is "Yankee" ingenuity at it's finest! Yes, it's easier to buy one ready made, but making your own really personalizes a tool.
Nice clean build. Great details.
Excellent build man!
Dude, that is a great looking vise! I would pay for a vise like that. I would bet others would too.
Great job!
You can buy them at Harbor Freight for under $20
Fantastic work, dude! Nicely done! 😃
Stay safe there with your family! 🖖😊
Vraiment merci beaucoup pour tout!!!
Değerli ustam mükemmel bir el işçiliğinin eseri olmuş.emeğine yüreğine sağlık başarın daim olsun
I love it good job. Now I’m gonna have to make one. Thank you 🙏🏼
Без слов понятно, идеально технически подход!
Very cool build. Thank you
I love the angle grinder roller thingy👍
Some REALLY nice techniques here. Wish I could find a piece of steel like that.
Clean job, amazing sir 👍👍 thank you
Fantastic looking !!!
Superb workmanship coupled with a great design idea.. Top draw
Looks awesome!
I will use this to make my own PCB HOLDER thanks for sharing your knowledge man, God bless you.
Wow💥 you are quite amazing my friend !!! I can't stop thinking' imagine if this guy had a welder💥 thanks for sharing your "incredible skills" my friend 👍
Brilliant! Well done, sir.
Absolutely brilliant WDT, first class engineering and re-purposing, excellent. Love it 👍
Very Lovely job.love it.
Absolutely brilliant. I would much prefer to make my own than buy something off the shelf that is nowhere near as good. Well done!
Good work, I appreciate this a lot.
İts perfect job sir.greetings from Turkey
Beautiful!
Thank you, you are a creative craftsman
Awesome. Made with little tools and better than any cheapo vice
Очень хорошо! Мастер!
Awesome build.
чистая работа,молодец вы,руки мастера.
Y
*_Parabéns, é muito legal ver o trabalho sendo bem feito_* 😃👍
Good work. We shared this video on our homemade tools forum this week 😎
thank you Very inspiring. your work is so perfect
I love it,,,fantastic work👍👍👍♥️♥️
Lo más ➕➕➕ prolijo que encontré en internet gracias 😃🙂😃🙂🙂😃 haré uno!!!!
Well done 👍
Genial...!!!....Gracias por Compartir... Saludosss.
Super work. Thanks
You made it.... because you enjoy building... 😊👍👍👍
very clever - well done!
price and non returnable time used = priceless. It's cool to learn how to make one incase
The enjoyment of building it that's why I make a lot of my own tools
Super master class ! 👍💪
that's nice buddy looks great
Nice job....well done
amazing, very nice iron clamp you made.
Tanpa las sedikit pun 🥰🥰
Like idea pren
Now that's cool right there. 👌👏👏👏😍
Brilliant ideas 👍
I stumbled across this. Great video.
Wow, I love that design! I might have to copy that. Also, I just subscribed to your channel.
У тебя золотые руки)
Nice bit of engineering that well done
Great work and very useful
Thanks so much for sharing
Awesome sir, you are really so perfect..
very well done. i like it!
you did some damn nice work for using hand tools
Amazing Work
Good job sir ! 👍
Класс! Единственно что - к этим тискам нужны сменные накладки, чуть выступающие над этими зажимным уголками. Чтобы можно было в тисках не только сверлить, но и пилить, резать.
Шедевр!
Amazing ✨