“The Unfinished Abandoned Project” - 1,000hp Toyota Drag Supra Model Car Build - 1/24 Tamiya

Поділитися
Вставка
  • Опубліковано 9 тра 2024
  • Tamiya Toyota Supra: amzn.to/4ah5YDP
    Hi guys, in this video I will be building an abandoned, barn find, work in progress, dusty & rusty unfinished project sleeper Toyota Supra drag car in 1/24 scale. Enjoy!
    Wanna show some support for the channel? Grab a set of mini RB26DETT engines on my mini web store at junsminigarage.com. They are currently on sale!
    3D files were purchased from cults3d and printed with Creality Halot One.
    Front lip: Scalemakina
    Hood: Blackboxstl
    Engine and Drag Wheels: Zerofactoryscaledwork
    My other videos-
    1/24 model car full builds - • 1/24 Scale Model Car F...
    ---All the tools I use to build my model kits are listed here:
    Model Building Basic Tool Set: amzn.to/2ElHtMh
    A3 Cutting Mat: amzn.to/3t8GmUP
    Tamiya Side Cutters: amzn.to/3z643lt
    Tamiya Hobby Knife: amzn.to/3aJRTmx
    Drill and Micro Drill Bits Set: amzn.to/4bBJxtV
    Panel Line Scriber:
    Tamiya Plastic Scriber II: amzn.to/34cDrRu
    Trumpeter Panel Line Engraver: amzn.to/2TFD1MX
    Scribing Pen with Guiding Tapes: amzn.to/3hPZQe7
    Glues:
    BSI Super Gold+ Glue: amzn.to/31aNVPb
    Tamiya Extra Thin Cement: amzn.to/2SbDC8A
    Elmer’s Clear Glue: amzn.to/3jfoEKD
    Sand paper:
    600 - 3000 Grit Sand Paper: amzn.to/32aryZJ
    Micro MESH Soft Touch Sanding Pads: amzn.to/33eik0h
    Painting:
    Airbrush Kits with Compressor: amzn.to/325JHb8
    Dual Action Airbrush: amzn.to/34brtrn
    Tamiya Painting Stand: amzn.to/2Q7h8UX
    Airbrush Cleaning Station: amzn.to/329T8WL
    Paint Brushes for Hand Paint: amzn.to/3aGwPvU
    Tamiya Acrylic Paint Retarder: amzn.to/33hrkln
    Paint/Fluid Droppers: amzn.to/32aizHZ
    Alligator Clips: amzn.to/3kWm2T0
    Paint Mixing Jars: amzn.to/3g855RP
    Primer:
    Tamiya Grey Primer for Airbrush: amzn.to/30okush
    Tamiya White Primer for Airbrush: amzn.to/3cLdxXb
    Spray Can Grey Primer: amzn.to/2GgnKPF
    Spray Can White Primer: amzn.to/2ScNRJB
    Thinner:
    MR Hobby Lacquer Thinner: amzn.to/3n5dFpa
    Tamiya Acrylic Thinner: amzn.to/34ens3T
    Tamiya Enamel Thinner: amzn.to/392nv6P
    Masking Tapes:
    Tamiya 6mm Masking Tape: amzn.to/348XezD
    Tamiya 10mm Masking Tape: amzn.to/3ibshj7
    Tamiya 18mm Masking Tape: amzn.to/3igOXOU
    Tamiya 40mm Masking Tape: amzn.to/2Oln2EV
    Tamiya Masking Tape for Curves(2mm): amzn.to/36mfSXo
    Tamiya Masking Sticker Sheet: amzn.to/3EGWHFf
    Other goodies I use:
    TAMIYA Polishing Compound Fine and Finish: amzn.to/2G1X1q1
    Tamiya Polishing Compound Sponges: amzn.to/3mBhXVA
    Tamiya Panel Line Accent Color Black: amzn.to/2EJlPSQ
    Tamiya Mark Fit Strong Decal Solution: amzn.to/3n3D82w
    Surgical Scalpels: amzn.to/3dSlMTu
    Duck Poster Putty: amzn.to/2Yix37r
    Ranger Gunmetal Embossing Powder: amzn.to/2Q6AyJR
    Hero Arts Embossing Powder(Red): amzn.to/30kfogI
    Milliput Superfine 2-part Putty: amzn.to/2YgExrM
    Mini Hand Saw: amzn.to/3mXY1Mt
    Hasegawa Mirror Finish: amzn.to/3mXJeTy
    GodHand Glass Cutting Mat: amzn.to/3pUtWAG
    #toyotasupra #supra #scalemodel #supramk4
    Tracks:
    ------------------------------
    Music from #Uppbeat (free for Creators!):
    uppbeat.io/t/ian-aisling/new-...
    License code: 59ME2WMRRQFUGPSB
    ------------------------------
    Music from #Uppbeat (free for Creators!):
    uppbeat.io/t/brock-hewitt-sto...
    License code: BFHQ3GIK0MWA1IND
    ------------------------------
    Music from #Uppbeat (free for Creators!):
    uppbeat.io/t/brock-hewitt-sto...
    License code: UYJYF8NZWHYAKYJD
    ------------------------------
    Music from #Uppbeat (free for Creators!):
    uppbeat.io/t/ian-aisling/quic...
    License code: SDAADUROJI90FH8T
    ------------------------------
    Other music tracks are licensed from Audiio.com:
    "City Life" - Alex Velte
    "Blue Deer" - Matteo De Grandis
    "Mistral" - Edward Abela
    "Embrace" - Atlas Reach
    ______________________________________________________
    DISCLAIMER
    Some of the above links are affiliate links, meaning, at no additional cost to you, I will earn a small commission if you click through and make a purchase, you are not obligated to do so, but it does help fund these videos in hopes of bringing value to you.
  • Авто та транспорт

КОМЕНТАРІ • 157

  • @spyderfreestone736
    @spyderfreestone736 18 днів тому +9

    Two boys messing around in grampas garage. The visiting friend askes about the dusty car in the back corner. "Hey what's that?" 9h that's a car my cousin started working on before he left for the Marine Corp. It was going to be a drag car when he finished, now my grand parents won't get rid of it since he died. I think he had done a lot of work on the motor, and fixed some of the body damage. I'm wanting to ask about working on it with my grandpa, but I'm a little worried he'll get upset.

    • @JunsMiniGarage
      @JunsMiniGarage  18 днів тому +5

      That’s a very very good story! It goes well with this build 100%! 👍

  • @scaleffect
    @scaleffect Місяць тому +47

    Outstanding work as usual. The little details to the weathering like the heart in the dust really set this one apart. Some photos of this build alongside your project car AE86 would be cool to see on Instagram or something. Thanks for sharing all your hard work and expertise as always!

    • @JunsMiniGarage
      @JunsMiniGarage  Місяць тому +9

      I will definitely put them together and take some photos since they have similar characteristics. And thank you very much for watching my videos.🥹

  • @user-bf5vo4uq6b
    @user-bf5vo4uq6b 21 день тому +4

    Hello. Thank you for showing us high quality plastic models every time. If you like, could you be my teacher? As a Japanese person, I am very happy to see how much Japanese plastic models are being made.

  • @johnnoob
    @johnnoob Місяць тому +8

    i love the storytelling that goes into a build like this. and the end result is top notch as always.

  • @SDRIFTERAbdlmounaim
    @SDRIFTERAbdlmounaim 16 днів тому +3

    those last 2 little scrubs on the dirty glass windows was the absolute final CHEF SPRINKLE lol !

  • @ScaleAutoGarage
    @ScaleAutoGarage Місяць тому +15

    It is amazing what 3D printing has done for the model building hobby. So many more options for custom work now and easier to obtain. Great work on this and so much creativity.

    • @JunsMiniGarage
      @JunsMiniGarage  Місяць тому +5

      Thank you Spence. Yeah 3D printing opens up tons of possibilities for scale modeling. There is a little bit of learning curve but once you get over it, it is all fun from there(except when the prints failed or you accidentally tipped over the resin jar and got resin all over the floor.😩)

    • @ScaleAutoGarage
      @ScaleAutoGarage Місяць тому

      @@JunsMiniGarage ah man, I can only imagine trying to clean all that up!! The loss of all that resin would make me cry. 😅

  • @dieseldmax5369
    @dieseldmax5369 15 днів тому +1

    kinda remind me when Brian arrive at Dom's shop with his 10sec car on the towing , awsome job and detail very impressive!!!

  • @JYAM101
    @JYAM101 Місяць тому +3

    The rust affect on the hatch was absolutely amazing! Great work, keen to watch more of your work now. 😋

  • @flyyyjr
    @flyyyjr 18 днів тому +2

    Ngl about time someone made one of these look abandoned kudos 2 u dude u killed it 👏🏽

  • @HemantR.20930
    @HemantR.20930 26 днів тому +4

    Just ordered this supra model from tamiya on amazon yesterday!! It is coming in 2 days and I cant wait to build it!

    • @JunsMiniGarage
      @JunsMiniGarage  26 днів тому +2

      That’s awesome! Have fun with the kit.👍

  • @Car_Dorito
    @Car_Dorito Місяць тому +4

    This...this is just a master peace!

  • @plrplm
    @plrplm Місяць тому +8

    with this music, it feels like the whole word depends on this build lol. great build, as always!

  • @douggoins2960
    @douggoins2960 Місяць тому +2

    Definitely one of my favorite model car building channels on UA-cam. I plan on doing my first one sometime this year

  • @tenacimortis3016
    @tenacimortis3016 Місяць тому +6

    Your work is always so fun. I think it would be really cool if you did a series where you built an abandoned car and then a series of models after that showed a restoration process. Almost like snap shots of the car being brought back to life.

    • @JunsMiniGarage
      @JunsMiniGarage  Місяць тому +1

      Thank you very much. That’s an excellent idea.👍

  • @flint707
    @flint707 Місяць тому +4

    Unbelievable craftsmanship

  • @NakamuraZenki_
    @NakamuraZenki_ Місяць тому +2

    Great details. Amazing craftmanship.
    Although, if it has a flat tire (somehow) it would be a perfect barn find. But, nonetheless, this is perfection of a build.

  • @_ford_crown_victoria_p
    @_ford_crown_victoria_p Місяць тому +2

    even if Jun were to build a pontiac vibe I’m still watching

  • @kevinu6004
    @kevinu6004 Місяць тому +9

    Awesome work.... what a symphony of ART!! ❤👏

  • @jdmboyee
    @jdmboyee Місяць тому +2

    A true artist

  • @thathobbyguy6774
    @thathobbyguy6774 Місяць тому +3

    I love these project car type design you started building. Very very beautiful work as always. Would you try the MK2 Toyota supra from MPC or tamiya next pleasee? White paint with a blue interior? Would mean a lot to me since I had one that I miss a lot

  • @CarNerd7
    @CarNerd7 Місяць тому +4

    Holy shit!! what an absolutely beautiful build and video!! amazing job as always Jun, love the attention to detail!

  • @grooveholmes79
    @grooveholmes79 Місяць тому +6

    awesome as always. I've always wanted to do a rust bucket build but have never done so yet. I need to try it

    • @JunsMiniGarage
      @JunsMiniGarage  Місяць тому

      Thank you. And definitely try some rust bucket builds or any weathered builds if you can. It’s different but it’s also a lot of fun.

  • @thecodex7701
    @thecodex7701 Місяць тому +6

    “Pop the hood”

  • @AdHocCars
    @AdHocCars Місяць тому +3

    Amazing work! I am in the middle of building Toyota Supra GT the TOM's version, there are so many tips in your video! Thanks a lot :)

    • @JunsMiniGarage
      @JunsMiniGarage  Місяць тому +1

      Thank you. I am glad my videos are helpful to you.🙏

  • @businessaspect218
    @businessaspect218 Місяць тому +6

    Outstanding 😮

  • @chaosvii9459
    @chaosvii9459 Місяць тому +2

    Tip for 3d print change inclination in the slicer. I love your videos❤

  • @JackSupraMan
    @JackSupraMan Місяць тому +3

    Che spettacolo 😍

  • @razordasquad
    @razordasquad 24 дні тому +3

    lovely work! grettings from chile✨

  • @georgeb2616
    @georgeb2616 Місяць тому +3

    What a brilliant video, the actual lfilming of the build and your commentary all great, but the music through out was fantastic. Thank you for sharing. 😊

    • @JunsMiniGarage
      @JunsMiniGarage  Місяць тому

      Thank you. I am glad you liked my music choice.❤️

  • @davegoose
    @davegoose Місяць тому +5

    I love your videos man!

  • @-DEATHSTROKE
    @-DEATHSTROKE Місяць тому +2

    I very much enjoyed this

  • @marsgarage8217
    @marsgarage8217 Місяць тому +5

    Beautiful work, I love the weather look.👍

  • @unclesweetiesmodelworks
    @unclesweetiesmodelworks Місяць тому +3

    Jun, that is a fantastic looking build. I love the resin engine and all the detail painting.

    • @JunsMiniGarage
      @JunsMiniGarage  Місяць тому

      Thank you very much. I am glad to hear that.

  • @thelegacyTYT
    @thelegacyTYT Місяць тому +2

    Jun-Senei never fails to amaze me❤️

  • @drafting5652
    @drafting5652 Місяць тому +5

    Thats awesome nicely done thanks for sharing 🙂

  • @TJHahn624
    @TJHahn624 Місяць тому +5

    Awesome work sir!

  • @BillyStrangeAutoModels
    @BillyStrangeAutoModels Місяць тому +4

    Incredible work!

  • @MrWinnster
    @MrWinnster Місяць тому +2

    If you print the bonnet vertically it'll take a lot longer but will need less supports and will reduce those contour style layer lines you had to sand out

    • @JunsMiniGarage
      @JunsMiniGarage  Місяць тому +1

      Thank you so much for the tip. I will keep that in mind.👍

  • @TheJhine5588
    @TheJhine5588 Місяць тому +2

    ❤❤❤ absolutely beautiful!! Great work!

  • @capyyy-_-
    @capyyy-_- Місяць тому +2

    beatuiful, qualty work, and i always love your vids. i do prefer no commentary however. can you try doing non stop streams of the entire process?

  • @sameribrahem1450
    @sameribrahem1450 29 днів тому +2

    this is amazing build

  • @cossiefordman720
    @cossiefordman720 Місяць тому +2

    The godfather of model cars strikes again!

  • @thescalemodeldad
    @thescalemodeldad 26 днів тому +3

    AMAZING BUILD AS ALWAYS BROTHER!!!!! 🔥 🔥 🔥 🔥

  • @KarlScaleModeling
    @KarlScaleModeling Місяць тому +2

    Awesome work 👍🏼 that's very nice and with all those 3d printed parts that you've added, it has become super realistic. Well done 😊👍🏼

  • @raykreations2602
    @raykreations2602 Місяць тому +3

    Awesome job!

  • @Spookeyo
    @Spookeyo Місяць тому +2

    Sweet build! A tip for the resin prints - before you cure them, place them in lukewarm water so you can remove the supports with ease (no snipping required), thanks to @UncleJessy for that! and then cure the parts.

  • @user-kd8qk8jc3c
    @user-kd8qk8jc3c Місяць тому +3

    It's amazing 🤩

  • @JanKoneczny
    @JanKoneczny Місяць тому +3

    Love this type of projects.

  • @Trejoo
    @Trejoo Місяць тому +2

    Nice work!

  • @lincolnbassett400
    @lincolnbassett400 Місяць тому +3

    This was a great video thank you 🙏

  • @AydensAnimations
    @AydensAnimations Місяць тому +3

    Looks soo cool!!!!

  • @cs2358
    @cs2358 Місяць тому +47

    IS THAT A SUPRA!!

  • @mayhemgarage80
    @mayhemgarage80 Місяць тому

    I really need to get some of those Tamia kits, they look so detailed

  • @modelcars2978
    @modelcars2978 Місяць тому +2

    Masterfully done!🤓👍

  • @domino3d16
    @domino3d16 Місяць тому +3

    very nice project :)

  • @user-zd4id2hk1x
    @user-zd4id2hk1x Місяць тому +2

    はじめまして😮カッコいいですね😃

  • @JG-Toy
    @JG-Toy Місяць тому +2

    interesting project👌👏

  • @blakebodaciousFTW
    @blakebodaciousFTW 23 дні тому +2

    hey Jun when it comes to the supports on your prints they should be able to just fall off very easily you really shouldnt have to cut them. i would lower your support % a little bit and go from there. just my input

    • @JunsMiniGarage
      @JunsMiniGarage  22 дні тому

      Thank you for the tips and information.🙏

  • @hobbyrobby
    @hobbyrobby Місяць тому +2

    Great project Jun! The engine turns out to be an awesome show piece! Funny enough I am working on a Supra project already that has some similarities to yours :)

    • @JunsMiniGarage
      @JunsMiniGarage  Місяць тому +2

      Thank you very much Robby! I can’t wait to see what your new project is. I already know it will be amazing.😍

  • @ToeKnee666
    @ToeKnee666 27 днів тому

    My friends dream car. He drove one a year ago, Unfortunately he wrecked and died in it but I took solace knowing he went with a smile

  • @MRBlackbird13
    @MRBlackbird13 Місяць тому +2

    This ist awaesome and also so sad. But the only detail what kind of destroing the look is, that the tirese should be flat ^^

    • @JunsMiniGarage
      @JunsMiniGarage  Місяць тому

      Thank you so much for the great idea!👍

  • @Mayank_Maximum
    @Mayank_Maximum Місяць тому +2

    outjerked by jun-civic eg 1/24

  • @DragonBallSeriesYt
    @DragonBallSeriesYt Місяць тому +4

    Hello

  • @Basiltpaul7
    @Basiltpaul7 25 днів тому +3

    Ra ta ta ta ta ........❤❤❤❤

  • @Bill_from_Nantucket137
    @Bill_from_Nantucket137 27 днів тому +1

    Can you make a general Lee barn find 🙏🏻

  • @user-zi2gb7rd9s
    @user-zi2gb7rd9s Місяць тому +2

    Очень круто работа! А как у вас можно приобрести 3d дополнения для этой модели? Или файл для печати!?

  • @Dot-Ee
    @Dot-Ee 26 днів тому +3

    Outstanding work! Quick question, I've been trying to find aftermarket parts to 3D print and/or buy to get shipped. Anyone know of a trusted website??

  • @michaelQuiambao2020
    @michaelQuiambao2020 Місяць тому +4

    Dont Hate the Supra Hate the Supra Kids

  • @yusnizayusof9942
    @yusnizayusof9942 Місяць тому +2

    sypeeeeerrrrr❤❤❤❤❤❤😅

  • @Bords_T4U.842
    @Bords_T4U.842 12 днів тому

    Nice car! Could you please do Takumi Fujiwara's AE86 (Project D version) next?

  • @abu7asoni244
    @abu7asoni244 Місяць тому +3

    ✨ART✨

  • @TheIndianAlien
    @TheIndianAlien 23 години тому

    You should do a 300zx plzzz

  • @DominicMartel-jl4ix
    @DominicMartel-jl4ix Місяць тому +1

    U don’t need to have any exhaust just make it exhaust headers with no exhaust pipes

  • @fraggett_-_8260
    @fraggett_-_8260 23 дні тому +2

    The details.

  • @DominicMartel-jl4ix
    @DominicMartel-jl4ix Місяць тому +1

    U should’ve made the tires look like they are flat

  • @adampasquale7816
    @adampasquale7816 Місяць тому

    I buy the car models I like and only put the engine together and forget about it hehe🤭🤭

  • @darkdetermination5438
    @darkdetermination5438 7 днів тому

    Hey bro can u build the fujimi devil Z

  • @jackdelacourt6093
    @jackdelacourt6093 Місяць тому +1

    Jun will you build muscle cars like the dodge charger and hellcat

    • @JunsMiniGarage
      @JunsMiniGarage  Місяць тому +1

      Oh yeah definitely! I like muscle cars especially older ones.

    • @jackdelacourt6093
      @jackdelacourt6093 Місяць тому +1

      @@JunsMiniGarage try the revell dodge charger and amt 1970 Monte Carlo if you can do Sean’s Monte Carlo from Fast and furious Tokyo drift

    • @JunsMiniGarage
      @JunsMiniGarage  Місяць тому +1

      Good suggestion! I will look into those AMT kits.👍

  • @hijk3212
    @hijk3212 Місяць тому +1

    Can u make the Lexus ls400/ Toyota Celsior

    • @JunsMiniGarage
      @JunsMiniGarage  Місяць тому

      That’s a good suggestion. Will put it on my to build list.👍

  • @szmulen
    @szmulen Місяць тому +1

    what drillbits and hand drill are you using? theyre not in the description

    • @JunsMiniGarage
      @JunsMiniGarage  Місяць тому +1

      Just updated the tool list in the description, it’s there now. Thank you very much.🙏

  • @RonGsworld
    @RonGsworld 20 днів тому

    Still waiting for the YELLOW hatch back civic 😢to be done

  • @Baksteen4
    @Baksteen4 Місяць тому

    what for printer do you use?

  • @swifty2844
    @swifty2844 Місяць тому

    I curious why you sand an injection moulded plastic? It will be smoother straight out the mould then you will ever get with sandpaper.

    • @JunsMiniGarage
      @JunsMiniGarage  27 днів тому

      Great question! I sanded the plastic body to make it rough for the primer to stick onto. If the surface is too smooth then it’s harder for the paint to bite into the plastic.👍

  • @Pro88teC
    @Pro88teC Місяць тому +1

    Maby next time do the tires as flat tires.

    • @JunsMiniGarage
      @JunsMiniGarage  Місяць тому +2

      Great idea. Thank you for the suggestion.👍

    • @Pro88teC
      @Pro88teC Місяць тому

      @@JunsMiniGarage thanks. Rally like this build.

  • @Kinsleycarman.
    @Kinsleycarman. Місяць тому +2

    Is is IS THAT A SUPRA MK4 JDM

  • @Fernweh3
    @Fernweh3 Місяць тому

    Здоров! А куда радиатор и охлаждение делось? Ты даже красил его но забыл поставить..

    • @wwhy_nott
      @wwhy_nott Місяць тому +1

      радиатор почти незаметно, но вообще его и в багажный отсек иногда переносят. плюс это же проект "заброшенный" поэтому некоторые детали могут быть попросту демонтированы. если присмотреться, то там даже инструменты лежат, как будто автомобиль средь бела дня бросили и забыли.

  • @AliRadaa
    @AliRadaa Місяць тому

    What do you do if your scribe slips and scratches the body?

    • @JunsMiniGarage
      @JunsMiniGarage  Місяць тому +1

      You can fix the scratches with epoxy putty, then sand it back flat.👍

  • @stevetv5587
    @stevetv5587 23 дні тому +2

    "Pop the hood please"

  • @akiempow
    @akiempow Місяць тому

    I own Supra kit for 5 years now, and never opened yet. I donno how to start😂.

    • @JunsMiniGarage
      @JunsMiniGarage  Місяць тому

      You can do it! It’s not as hard as it seems. Just take your time to build it slowly. 👍

  • @minervapadua9982
    @minervapadua9982 Місяць тому +2

    its that a supra butway im supra mark 4 aka im jake hehehe😅

  • @Hudsonplays3769
    @Hudsonplays3769 21 годину тому

    ITS A- ITS A- ITS A SUPRA RRRRRATTATATATATATATATTATATA

  • @user-zi2gb7rd9s
    @user-zi2gb7rd9s Місяць тому

    Где можно найти файл для 3D печати?

  • @RileyGoodwin-sl2zg
    @RileyGoodwin-sl2zg 2 дні тому

    I recently made my own. But it’s not that good

  • @RASHED7842
    @RASHED7842 2 дні тому

    First time

  • @hooptastic_hippie8522
    @hooptastic_hippie8522 Місяць тому +3

    rat rod supra

  • @supra_RATATATA335
    @supra_RATATATA335 Місяць тому

    WT

  • @AliRadaa
    @AliRadaa Місяць тому

    The worst part of model car building is the impossible polishing 😞

  • @MikeLaRock88
    @MikeLaRock88 Місяць тому +2

    Amazing job. But in reality, an abandoned supra wouldn't have its 2JZ and $3000 slicks still on 😂

  • @erenlegend7869
    @erenlegend7869 26 днів тому +5

    You have not done good to this supra 🥺

  • @bigben8057
    @bigben8057 Місяць тому +2

    Terrible project