Just found this channel and this guy is very professional with keeping temp profiles on these tiny parts safely and preheating as much as possible to prevent too much heat on the chip for too long. Should have way more subscribers. Look forward to more videos. Hey does anyone know what causes the touch to go out on older Ipads? Is it many diff chips or filters or usually one general part. So many touch screens fail on early ipads so have many to repair and bring to life again..
What shorts did you find on the HDMI encoder IC (which pins)? Or did you just assume the chip was bad? Could you have fixed it by just replacing the diode?
@@watutalkinboutwillis4870 I checked capacitors around the chip and few of them were showing short circuit. All the short circuits were gone once I removed the chip
Thank you for watching! I assume you mean capacitors, not diodes. I don’t know the values as there is no schematics available but I’m sure you can find the values if you search the internet
@@electrorep3 which is the better one you use ? I’m using the SRA flux which Is American brand, don’t really like the cheap fluxes as there not great and genuine Amtech in UK is expensive
I tried the SRA, is not good at all. I use Amtech usually or ChipQuick SMD291 but they are expensive. Try Mechanic SD360 from aliexpress, is cheap and quite good
@@electrorep3 yes I know the SRA is not good, bought it thinking it’s good as it was a USA brand but I was wrong, I do have a different chipquick one and I actually got the Mechanic SD360 which is the best Chinese one I tried but not as good as Amtech
have tablette dell venue T07G 11 pro ,I left it updating at night, and in the morning I found it turned off also the power light is off I tried most solutions in the dell's sit but always still off,I checked the power charger it's good it gives 19.5v and when I checked the connectors battery emplacement I found 2.23v, my friend tell me you must change the battery, but I think perhaps the Dc power jack board of computer is it out, please could you help me
Unfortunately it could be many things, without having it on the bench is hard to diagnose. I can’t just tell you to replace the charging port or other parts, you will waste your money. Try a local repair shop or if you are in UK you can mail it to me, details are in the description
Greetings brother, you repair blackmagiec devices whose HDMI/SDI outputs do not work correctly. I have an ATEM STUDIO HD and the multiviewer output is not functional, comments saying that it is the CPU or voltage so that the cameras can be seen in the multiviewer. Anything I can send you repair examples
@@johnnyjimenezarriaga5352 If google translate is correct, you are asking me to give you my website. Is in the description but here it is again www.electrorep.co.uk 👍
Great job! Those zener diodes are a pain in the backside sometimes lol
Really appreciate the links for parts. Thank you so much
You are welcome, thank you for watching!
any more links for other small parts on logic board for the PS5?@@electrorep3
"Alexa turn on the extractor fan" that sounds so cool 😂 that was a good and clean repair!
Just found this channel and this guy is very professional with keeping temp profiles on these tiny parts safely and preheating as much as possible to prevent too much heat on the chip for too long. Should have way more subscribers. Look forward to more videos. Hey does anyone know what causes the touch to go out on older Ipads? Is it many diff chips or filters or usually one general part. So many touch screens fail on early ipads so have many to repair and bring to life again..
Your video and workmanship is so beautiful
For a big man you have incredibley steady hands 😀👍🏻 Great job mate
Very good job, nice and clean!✅
Nice clean work 👍
How much is a hdmi chip ?
www.consolefix.shop/products/genuine-mn864739-hdmi-encoder-for-playstation-5-consoles?_pos=4&_sid=7ebaa2d63&_ss=r
good job !
What shorts did you find on the HDMI encoder IC (which pins)? Or did you just assume the chip was bad? Could you have fixed it by just replacing the diode?
@@watutalkinboutwillis4870 I checked capacitors around the chip and few of them were showing short circuit. All the short circuits were gone once I removed the chip
@@electrorep3 Thanks for the update!
thank you so much for the video and your work.
are the diodes around the panasonic chip 100pf?
Thank you for watching! I assume you mean capacitors, not diodes. I don’t know the values as there is no schematics available but I’m sure you can find the values if you search the internet
Good job, what flux you using ?
I’m using MG Chemicals 8341 in this video but it’s not that good.
@@electrorep3 which is the better one you use ?
I’m using the SRA flux which Is American brand, don’t really like the cheap fluxes as there not great and genuine Amtech in UK is expensive
I tried the SRA, is not good at all. I use Amtech usually or ChipQuick SMD291 but they are expensive. Try Mechanic SD360 from aliexpress, is cheap and quite good
@@electrorep3 yes I know the SRA is not good, bought it thinking it’s good as it was a USA brand but I was wrong, I do have a different chipquick one and I actually got the Mechanic SD360 which is the best Chinese one I tried but not as good as Amtech
Great job sir and can u tell me the camera name u r using
Thank you! I’m using a Logitech brio 4k as an overhead camera
Did this cause no start and beeping only ?
What causes this problem ?
@10:34 Diode was stuck to the tape, didn’t leave workbench universe
Looks like it, I will check
How did you know that component was a zener diode? Was there a marking on the board?
I had problems with it before and just searched the internet and found what diode it was and ordered some
Hello 10:10 référence pleas ?
Link is in the video description.
have tablette dell venue T07G 11 pro ,I left it updating at night, and in the morning I found it turned off also the power light is off I tried most solutions in the dell's sit but always still off,I checked the power charger it's good it gives 19.5v and when I checked the connectors battery emplacement I found 2.23v, my friend tell me you must change the battery, but I think perhaps the Dc power jack board of computer is it out, please could you help me
Unfortunately it could be many things, without having it on the bench is hard to diagnose. I can’t just tell you to replace the charging port or other parts, you will waste your money. Try a local repair shop or if you are in UK you can mail it to me, details are in the description
Hi Dear! I changed hdmi port but i have black screen or many points on tv with 480p. Can be ic Panasonic fault?
It could be but first I would check the hdmi port connections and the surrounding components including the filters
@@electrorep3 Thanks! I whatched now that a filter is missing!
Sir I lost one of those 4 tiny component behind the HDMI port
So what is the solution for that
Please help
Check consolefix.shop. You should find any part you need there.
Greetings brother, you repair blackmagiec devices whose HDMI/SDI outputs do not work correctly. I have an ATEM STUDIO HD and the multiviewer output is not functional, comments saying that it is the CPU or voltage so that the cameras can be seen in the multiviewer. Anything I can send you repair examples
You can contact me through my website
@@electrorep3 🤠si, mandame tu correo o sitio web
@@johnnyjimenezarriaga5352 If google translate is correct, you are asking me to give you my website. Is in the description but here it is again www.electrorep.co.uk 👍
hello, whats your microscope name and your lights thanks in advance
Links added to video description, thank you for watching!
Diodes, caps, all of the hdmi components please help me
Hello, great video, how hot did you have the air set to?
Thank you! Around 360C when I put the good chip back
@@electrorep3 awesome, and to remove it?, I’ve got mine set to 600F and still wont come out!!!
@@FredyArg If you are sure the chip is faulty you can use max temp and airflow
why you share with us so few video?
I plan to upload more often, thank you for watching
I need those diodes share me the link
Links for the components used added to video description, thanks for watching!
To fit a donar ic is one thing to fit a brand new ic is anther ball game 😅😂
It’s not that different, you can apply leaded solder to the new ic beforehand. The problem is the big number of fake chips being sold
Can you add subtitles and translate them into Turkish?
I can’t, sorry