hello ,. for the jubilee bracelet what size should I get screwdriver, Bergion has 1.2mm and 1.4mm, since you mention you used 1.3mm, ... need help... thanks
Hey Buddy, Nice video, could it be possible for you to tell us viewers where you sourced the jubilee bracelet from? I’m looking for one for my Batman, but hard to source a good quality one.
There are about three ways to get it, 1. It can be ordered directly by your authorized dealer and sold to you. You’ll need to have a great relationship with your AD to pull that off. 2. You can always buy a bracelet or any other part for a watch as long as it was originally offered on the watch. You can get it directly from RSC but it might require playing a little bit of a game. Remove (or have a pro remove) the bracelet from a 116234 DJ (some other references too) bring it to RSC tell them you either misplaced the bracelet or bought the watch without it. RSC will sell you one and mount it on the watch. 3. Buy it preowned from a forum exchange, classifieds or eBay. Not ideal for most but unfortunately often the only option.
Great tutorial thanks for sharing, btw I do have a super jubilee by chance and I would like to put it on my GMT 116712LN, but I don't have the spring bars matches, do you know by chance what exactly is the size of the spring bars for this 63600 ? Thanks
Really nice to have the newer jubilee bracelet! Would you happen to know if an older model like datejust 16234 could fit the newer 116234 solid end link bracelet?
Hi, I really couldn’t tell you for sure. If I had to guess I’d say yes. The 63600 obviously fits other 5 digit references. I also have a 62510 jubilee that fits my 16710. That bracelet comes from earlier year 16710s. Most of the bracelets are at least very similar in the end links. If I ever come across a 16234 I’ll give it a try.
On the clasp how can I stop the it from wobbling which is weird I usually fix my watches on my own but this particular one I think is missing something cause it’s very wobble with the julibee clasp
Hello, are you sure that for the Jubilee you need a 1.3 Screw Driver? I have a Jubilee and must buy one. But to get a 1.3 from Bergeon ist really hard... thx and kind regards
@@DerBitfluesterer no prob! I just rewatched my video and the reason I said you have to use the 1.3 is because I made this tutorial for a friend and sent him a 1.6mm and a 1.3mm. Of those two, you CANNOT use the 1.6mm. Anyway, I just made this video for my buddy, didn't know 17k people would watch it haha
@@u.u.u9969 I couldn't tell you. I don't own the new sub, but the DJ41 Jubilees are 21mm. That doesn't mean it will fit, but that'd be my first stop. Please report back if you find anything out!
Hi, the fit is perfect. It's totally compatible with no issues whatsoever. That said, I have mixed feelings about this bracelet in general and I don't love it paired with the 16710. Its tricky cause on one hand, I think the glidelock clasp is one of the best design features rolex has created in the past 30 years. On the other I think it's too long and heavy. For most of us, real world use will never require the full extension of the glidelock. I really wish they would make a glidelock clasp with half the range in a smaller clasp. I think it works well with the heavier 6 digit reference sports watches, but I find the clasp to be way too heavy for use with my 16710. If you can manage to get a 97200 bracelet for retail, you may as well try, as you can easily sell it if you don't like it. Good luck!
@@coldcasewatchesccw7158 It's good to hear that it fits great. Personally, I don't think I'd have issues with the form factor of the glidelock clasp. My problem is that my wrist swells like crazy during the day and there are times when my watch is either way too loose or too tight, all in one day. Also the tight tolerances of this bracelet is a big plus for me, if it weren't for the price.
Thank you. That was a big help
Grrrrr .... HANDSOME BRACELET !!!!
hello ,. for the jubilee bracelet what size should I get screwdriver, Bergion has 1.2mm and 1.4mm, since you mention you used 1.3mm, ... need help... thanks
My Rolex has holes on the sides of the case! What tool can I use? Thank you!
Hey Buddy,
Nice video, could it be possible for you to tell us viewers where you sourced the jubilee bracelet from?
I’m looking for one for my Batman, but hard to source a good quality one.
There are about three ways to get it,
1. It can be ordered directly by your authorized dealer and sold to you. You’ll need to have a great relationship with your AD to pull that off.
2. You can always buy a bracelet or any other part for a watch as long as it was originally offered on the watch. You can get it directly from RSC but it might require playing a little bit of a game. Remove (or have a pro remove) the bracelet from a 116234 DJ (some other references too) bring it to RSC tell them you either misplaced the bracelet or bought the watch without it. RSC will sell you one and mount it on the watch.
3. Buy it preowned from a forum exchange, classifieds or eBay. Not ideal for most but unfortunately often the only option.
Great tutorial thanks for sharing, btw I do have a super jubilee by chance and I would like to put it on my GMT 116712LN, but I don't have the spring bars matches, do you know by chance what exactly is the size of the spring bars for this 63600 ?
Thanks
Really nice to have the newer jubilee bracelet! Would you happen to know if an older model like datejust 16234 could fit the newer 116234 solid end link bracelet?
Hi, I really couldn’t tell you for sure. If I had to guess I’d say yes. The 63600 obviously fits other 5 digit references. I also have a 62510 jubilee that fits my 16710. That bracelet comes from earlier year 16710s. Most of the bracelets are at least very similar in the end links. If I ever come across a 16234 I’ll give it a try.
ColdCaseWatches CCW thanks for your insight!
Where did you buy the tweazers?
VShaped Watch Spring Bar Tweezers can be bought on Amazon
Great video, thank you
Hi, it looks pretty nice on your gmt. Where to get this jubilee?
Thanks! it's a 63600 jubilee bracelet from a 116234 Datejust.
On the clasp how can I stop the it from wobbling which is weird I usually fix my watches on my own but this particular one I think is missing something cause it’s very wobble with the julibee clasp
Can you do this to a submariner??
What’s it called the tool that you used to remove the bracelet.
Spingbar removal tool (pliers variant)
@@latibes thanks
Hello, are you sure that for the Jubilee you need a 1.3 Screw Driver? I have a Jubilee and must buy one. But to get a 1.3 from Bergeon ist really hard... thx and kind regards
Hi, for the 63600 bracelet you can use a 1.4mm driver. For the new jubilee bracelets on the DJs and 126710 GMTs you MUST use a 1.3mm. Good Luck!
@@coldcasewatchesccw7158 THANK YOU VERY MUCH!!! That helps!
@@DerBitfluesterer no prob! I just rewatched my video and the reason I said you have to use the 1.3 is because I made this tutorial for a friend and sent him a 1.6mm and a 1.3mm. Of those two, you CANNOT use the 1.6mm. Anyway, I just made this video for my buddy, didn't know 17k people would watch it haha
@@coldcasewatchesccw7158 😁👍🏼
What are the tools necessary
Which brand is your tweezer from??!
Bergeon 7825
How do you attach the Jubillee braclet without the V Shaped tool? Could you please advise? Thanks
Hi, It's the only method i use. I know you can use a traditional fork tip tool but I wouldn't be able to confidently provide advice on that. sorry!
@@coldcasewatchesccw7158 thanks 👍
is this the 41mm/21mm
no this is a 40mm case and 20mm lug width. 41/21 would be the new Submariners, DJ41s, maybe some others too.
@@coldcasewatchesccw7158 what jubilee will work on the new 21mm sub
@@u.u.u9969 I couldn't tell you. I don't own the new sub, but the DJ41 Jubilees are 21mm. That doesn't mean it will fit, but that'd be my first stop. Please report back if you find anything out!
Basically without the tweezers it’s impossible😅
Haha it can definitely be done but I have absolutely no clue how you could do it without scratching the shit out of the watch.
@@coldcasewatchesccw7158 where would I find the tweezers I’m going thru it trying to put my jubilee band on
Hi mate, can you please tell me if I can install jubilee bracelet of my 34mm oyster perpetual? Thanks
Is that a 97200 bracelet? How's the fit? Was looking to do the same with my 16710.
Hi, the fit is perfect. It's totally compatible with no issues whatsoever. That said, I have mixed feelings about this bracelet in general and I don't love it paired with the 16710. Its tricky cause on one hand, I think the glidelock clasp is one of the best design features rolex has created in the past 30 years. On the other I think it's too long and heavy. For most of us, real world use will never require the full extension of the glidelock. I really wish they would make a glidelock clasp with half the range in a smaller clasp. I think it works well with the heavier 6 digit reference sports watches, but I find the clasp to be way too heavy for use with my 16710. If you can manage to get a 97200 bracelet for retail, you may as well try, as you can easily sell it if you don't like it. Good luck!
@@coldcasewatchesccw7158 It's good to hear that it fits great. Personally, I don't think I'd have issues with the form factor of the glidelock clasp. My problem is that my wrist swells like crazy during the day and there are times when my watch is either way too loose or too tight, all in one day. Also the tight tolerances of this bracelet is a big plus for me, if it weren't for the price.