White Ink Workflow in SAi Flexi
Вставка
- Опубліковано 20 жов 2024
- In this tutorial, Jason walks through a white ink workflow for the HP Latex 700w and 800w printers.
White ink can be tricky to worth with but Flexi makes this relatively easy.
ONE SOLUTION FOR ALL YOUR PRINT, CUT AND DESIGN NEEDS
SAi Flexi is the only all-in-one design, print and cut software for sign and print providers. With nearly 3 out of 4 shops using it, Flexi is the industry-standard for sign-specific design tools, RIP software, print-and-cut software, and direct vinyl cutting.
Try it for free today: bit.ly/get-flexi
I could not get the white text to show up in the white channel. I followed these instructions over and over, also adding the 1% yellow as mentioned here.
I found that when I select the dropper tool it will show you the value of 1 %. However if you scroll to the right it states a mapped to value. So my 1% was mapped to 0%. So even though I had the 1% in the artwork, the white under color setting would not recognize as color therefore not applying white to white areas in the print. Hope this can help 4:20
I followed these instructions and when it came to printing- even after double checking that the layers are correct and has the correct spot color for white, when I send it over to the Production Manager and split the jobs there and send it- it only prints the white layer but just as outlines, even though what I have and double check shows everything correctly. I even went back and re-did it. if you could help me out ASAP that would be greatly appreciated.
thank you!
On the layers... so you are using the "green" as the "White" for visibility purposes, yes or no?
how do i set to print only white, i dont want print any other colur. just white. is there any information how you set white as a spot colour
Why white ink need? White colour print well purpose? Please explain sir?😊
When it comes to printing - even though everything is correct and specified in each layer- after sending it over to the Production Manager and spliting the layers and when I send over the main job it only prints the white but prints it as an outline of the design. even though, after double checking my spot color is named correctly for the White same for the Color (graphic), and it appears correctly on the Flexi side and Production Manager Side. I did go through this video again and re-set up and still having the same issue. If you could get back to me on this asap it would be greatly appreciated.
thanks!
Hi I’m printing dtf printing but with I print my logos the white ink always over flows leaving a shadow of white over the artwork how do I keep the underbase of white only under my logos only
We do have 700W
Is it possible to add contour cut after creating the spot color to print and cut !?
How that this work in mimaki ucjv 300 ?
Did this work?