Detailed Single Storey Estimation of a building by long wall and short wall method

[@calvinceamollo4853]

is there a video for roof work? I am pleased with your work.

[@nafly2009]

Why didn't deduction for internal plastering

[@shubhamkhonde793]

There should be deduction in internal plastering

[@gaureshmahajan2673]

Thank you mam,kindly also make video on rate analysis and septik tank estimate

[@JuliusSelyazi-hz2nt]

Thank you so much for this. I'd like you to do for us a more complex plan with many outer corners

[@Tarun-ye8ek]

Thank you so much mam, a good topic I ever watch

[@structuralanalysisanddesign]

Most welcome, keep watching and sharing

[@svamsi9219]

For inside plastering for passage portion, u have taken length as 2.4 instead of 1.8. That might be an error because u have already covered the outer faces of passage portion as inside faces of bedroom and kitchen.

[@sukruthakrishnan8177]

Please upload the estimation of two storey building

[@botsalakshmanarao9896]

Thank u madam it is a full detailed information

[@structuralanalysisanddesign]

Welcome 😊 keep watching and sharing

[@sandhyamishra6789]

Heya can you give me the full detailed estimate of single storey building

[@CivilEngineeringEdu]

Good content..

[@structuralanalysisanddesign]

Thank you, keep watching and sharing

[@chandrakalapayam3928]

Why You are not calculated short wall for earthwork excavation

[@yohanu1177]

Thanks madam 💕🥰

[@pavansurya4213]

missing the inside plastering detection

[@muhammadayyaz3112]

Please tell me about refilling of foundation?!

[@ajayroj9325]

Thank you so much Ma'am

[@Maayon001]

DOUBT 🙋‍♂ : why the front portion breadth is added, and the rear portion the breadth is substracted in long walls? kindly explain it. Otherwise the content was so great. Thank you!

[@ashutoshpatil5240]

Thanks mam👍

[@shanthidevigovindasamy3198]

Thank you mam❤️

[@structuralanalysisanddesign]

Thanks for watching, all the best

[@rv_edits_28]

Can anyone tell me, how many t - junction's in this plan?
If we are solving by Center line method ?

[@adityarathore5617]

Total 8 t joints if m not wrong

[@ayutshisode7835]

54.5 chainage length and 10 no of joint

[@superman6720]

Ma'am in last one wood work work Is that a mistake that height value is inserted in breadth column?

[@diyak4965]

Thank You Mam

[@structuralanalysisanddesign]

Most welcome 😊

[@jayhawkaahha580]

Very good explain madam thank you madam create more videos of civil engineering videos

[@structuralanalysisanddesign]

Thank you for watching, we will come up with more videos on civil engineering

[@Keepitunknown123-j2g]

why beam is not included in the calculation

[@manassehamihere2874]

Please why is it that some of the long walls are been added and other been substrated

[@kunnakudisrini]

can i download with your permission and if so how am i to do so

[@mdyusufmaniyar9916]

Madam by centre line method
How many junction can I get ?
9 or 10

[@akany2203]

10

[@nationfirst5717]

This is not centre line methodc.yvr caculating by adding 0.3/2 which i think it shold .3 because we talk outer to outer distance .

[@Ahmad-sc2ne]

Maim centre line method pe ak video please 😢

[@structuralanalysisanddesign]

It is already uploaded

[@Hydro-SolutionTube]

mam are you volunteer to share the excel sheet you are using to do this example?

[@windstorm4141]

Name of book please?

[@Are.you.okay...1]

There are 6 passages..y the no of passages was given 1 in sand filling part

[@alonerider7732]

Back bancher's r watching before es&c exam in 2021

[@structuralanalysisanddesign]

Keep supporting by watching and sharing

[@bujjikanna6992]

I'm first bench but I'm watching now, tomorrow is my exam

[@quietkid3927]

@@bujjikanna6992 Same 😂

[@shaikabdulsattar3121]

Watching in 2023...we r ultra back benchers

[@rakshithac448]

Thank u mam

[@saich8595]

Awesome ❤️

[@structuralanalysisanddesign]

Thank you so much, keep watching and sharing

[@Justice12]

I don't understand how you get 4.704 after adding 3, 9.8, 0.8, 0.2 on the main building long wall

[@krishnanshumisra610]

its not adding its multiplication, 3*9.8*0.8*0.2 as you are finding qty in volume so why will u add?

[@sanjaygopal9293]

Presentation is superrrrrrbbbbb. But explanation could have been more elaborate.

[@sanjaysanju5217]

Solve the centre line method

[@muhammadmarafa1666]

A good one

[@Yash_pratap24]

Lintel nhi hoga mam

[@Ashishkumar-gs8mb]

Can use thiw in exams Karnataka Diploma

[@structuralanalysisanddesign]

Yes, definitely

[@shwetlata5384]

Inside plaster deduction not done

[@deepisivakannan]

Steel calculation???

[@structuralanalysisanddesign]

Steel calculation is not shown

[@Fbggfvnnjj]

Maim mujhe bhi class online karna he

[@mbalaji501]

Super informative but for finding long wall length we should add always with breadth but you are subtracting with breadth why?

[@pgarc3493]

We are excavating inside short wall

[@Kalyankrishna-cu6sm]

In the problem they have given ratios 1:4, 1:6
Where we have to use them

[@akhildeshpande5197]

Super 👌👌

[@structuralanalysisanddesign]

Thank you, keep watching and supporting

[@pgarc3493]

👌🏻

[@aksharsoni3869]

Ventilater 😂😂😂

[@onmyway_aathi1447]

👏👍