How to Clean Zinsser BIN - HVLP Gun Cleaning - Graco 9.5 Finish Pro
Вставка
- Опубліковано 18 січ 2021
- How to Clean Zinsser BIN - HVLP Gun Cleaning Graco 9.5 Finish Pro.
Virosol at a good price here -- amzn.to/2XTOR8n
Quickly clean your hvlp gun after using Zinsser Bin using gun wash or de natured alcohol. Followed with a rinse through with virosol then clean water. You can do this with less than 500ml of cleaner.
Simply strip the gun down as shown and use a wet rag and pipe cleaners to get it cleaned internally.
If you want to try virosol then check below for one of the best prices buying 2 x tubs together. Dilute and use neat its a brilliant cleaner and de greaser.
amzn.to/2XTOR8n
Any questions please let me know in the comments. Thanks for watching.
Instagram - / sprayaholic. .
Facebook - / sprayaholic
Twitter - sprayaholic?lang=en
DISCLAIMER: Some links included in this description are affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you!
Thank you for supporting SPRAYAHOLIC so I can continue to provide you with free content each week!
Sharing UA-cam tips to help you gain experience faster than you thought possible! - Навчання та стиль
Thank you so much for taking the time to point me to this video. Great job. Cheers
Thanks for watching hopefully some of my other videos may be of interest too. Any question feel free to ask
Thanks mate we need people like you for information like this well done fella
Appreciate it, thanks for watching. Lots of other videos on the channel about hvlp and airless
Always informative and entertaining Simon. Good clear instructions. Best spray related videos. Stay stay mate.
Appreciate it bud. Thanks for the feedback. Hope youre keeping well
Feel abit more comfortable spraying Zinsser BIN now thanks for doing the video
Great, thanks for the support
Great video Simon, I’ll be more than confident to run B.I.N through my 9.5 now! Keep the vids coming pal 👍🏻
Ha we got there in the end 👍
Great video, feel abit better about using BIN now. Keep up the great videos. Really helpful
Nice one thats for watching
Great video Simon. Got to love a bit of BIN
Thanks for watching
Thank you, Sir, for helping me understand and use my new 9.5!
Appreciate your support. I'll be adding more hvlp videos soon after having a break from UA-cam. You can also find me on Instagram for more content. Any questions feel free to ask qnd I'll try and help
Good effort mate, thats cleared up some doubts👍
Thanks for watching glad you found it helpful ✌
thanks for these videos really helpful
I appreciate this. I’ve been afraid to put Bin primer through my spray gun.
Glad you found the video. Honestly it cleans out faster than waterbased when its fresh
Cheers mate that’s what I do go around with q1 sensitive or yellow frog and then tape polythene but I am thinking about what you said about dust off the sanding thanks I will try them tapes
Tesa pink is the lowest tac. But when surfaces are cold some sensitive tapes sont stick well do ideally run your finger over them before you hit that area with the sprayer incaee it blows it up. Same happens next day. It can re stick next day too if youve already sprayed.
But thats what usually happens. Its because when you sand walls theres usually alot of dust still on the wall. Or if youve used contract matt under durable. The durable doesnt bond well to contracy and will pull
Just for those who don't know, you can also use water and ammonia 50% mix to clean up BIN, anything that is dried up would need denature alcohol. Much cheaper compared to denature alcohol
Cheers. Are you in the states?
@@sprayaholic yes sir
@@duartepaintinghandymanservices denatured (meths) over here in the UK isnt very expensive and is widely available. Its the product mainly associated with zinsser BIN over here
@@sprayaholic well in the states a gallon of denature is around $15 a gallon of ammonia around $2
I'm in California and they took denatured alcohol off the shelves so we can't purchase it anymore.
I list thing i have will any work,?
Acetone
Paraffin
Turps substitute
No need to remove the nozzle. Use a straw brush - long brush with long wire handle. Insert from back all the way to the tip of the nozzle. Fill suction line with alcohol. Pull brush back and forth. Whitish alcohol will squirt - indicating you are scrubbing the nozzle from the inside. Also clean needle and the tube (air valve) in which the needle goes in. I do this every day multiple times, zero problems.
Halfway through there was an advert on eczema cream 😂 I think UA-cam are worried you’re not using gloves when using meths 😄 cracking video Simon 👍🏼
🤣🤣 cream cant help me now. Thanks for watching
@@sprayaholic i don't use gloves either. 🤭 What kind of soap do you use to get all those residues off your hands? I need a good soap.....
Great video. Do you have one on how to clean out a pressure pot and paint lines?
Thanks. I dont yet. But i can do one soon. It would be the same principle as the video. What product, or just in general
Hi mate good videos. Just a quick question about the tape you use when you have sprayed walls and gone around with tape and drop clothes the next day to spray the ceiling. I have tried everything but even the best pulls some of the wall paint away. I was wondering what tape to use
Hey bud. Did you see the video i made on masking a room?
I changed over to indasa a year or so ago. Also tesa is great. If ive painted. I use sensitive or low tac to tape my walls. Then tape and polythene onto that. Tape pulls paint off when its not bonded, so could be dust behind the paint from when it was sanded.
But I'll always use a low tac and then tape onto that with protection hope that helps. Also deltec purple is nice very similar to indasa purple though
You can dilute gun wash with meths making it less aggressive. Usually I use this to clean lacquer from expensive brushes, but could be useful on more “delicate” parts of a spray gun.
Thanks for sharing the tip. When i use things like that its literally to use while im there, id be worried about rubbers perishing over time with it sat in too long
What can you thin this down with for spraying?
I left Ben Moore Impervo in a cup for nearly a year; it was hopeless trying to open it, discarded and bought a new cup-they're not cheap ~$65
ha yes i had to throw my fuji cup out. i left bin in that one for maybe a similar time. it was like a gold mine inside ha
I've been encouraged to enter the world of spraying rather than brush and roller as you make it look very simple with all your videos which aren't "techy"! Do you use water based satinwood for woodwork and if so how much do you dilute or do you prefer oil based i.e. Dulux Satinwood (and would you dilute with white spirit ? My concern is the cleaning especially all the internal bits of the gun etc. Having just invested in a Graco 9. HVLP I'm struggling to get the right a mount of paint onto the doors and skirting? many thanks in advance
Hry thanks for watching the videos glad you found them helpful. I try to keep things simple.
I mainly used waterbased and any finish. I use a number 4 needle. You want around 10% dilution
I actually use a measuring jug or when you get an eye for it you can judge it by eye. Some people tend to go too fast with hvlp thinking theyve applied too much. When infact not enough is on there qnd it dries rough. So its better to build sections up in several coats dont go for gold with 1 coat. I'll share a video i did showing you waterbased set up
Check this video out. Should explain it abit better
ua-cam.com/video/i7qGadbSr-g/v-deo.html
Hi my friend at the risk of sounding daft is the 3m system the same as graco flexi liners
Hey. The 3m system is the same principle yes. Can spray all directions, think they sell a connector for most brand guns
love your videos, great content!!
Thinking of spraying my kitchen, it's a wooden kitchen already with a painted finish. What paint would you recommend for the undercoat and topcoat? Any tips would be welcome :)
I was going to go with a Zinnser bin, and Dulux diamond satinwood??
@Balticuz sounds like a decent combo. Just make sure you clean the doors down with a degreaser first then rinse and sand and youre away
Noticed loads of people are talking about renner paint for kitchen cabinets but never tried it
Hi mate great video,
Do you think the graco 9.5 machine would be good spraying upvc?
Thanks
Thanks. Yes it will work fine, its hose length is around 10m with the whip so reaches 1st floor windows with turbine on the floor.
@@BusterBloodVessel1 trial and error but always start low and increase. These general settings i apply in nearly all the hvlp videos
Take a quick look.
Great video, thanks !
How to store hvlp gun after cleaning with water ? Do you use oil or grease ?
Thanks
I don't tend to store it in anything and it's been fine for me.
So I have a small space to undercoat spray 18 x kitchen cabinet doors in my garage. Zinder Bin shellac primer ( I’m in the states too) takes 45 mins to dry per coat . If I do four doors at a time I lay them down and spray both side , I will need to leave 45 mins between coats.
Will the nozzles clog up in 45 mins too on gun? How do you prevent this to do multiple coats, or do you have to just clean tips etc every time?
Have a brush and cleaning product close by. When done i brush the tip, pull trigger back and brush tip then release. So long as the build up has gone you'll be fine. As inside is air tight. The tip would skin over id say within 30mins of no use.
But means you dont need to strip anything down. Worst case. You unscrw the horns etc for a quick soak and brush the. Re fit
Thank you! Good to know ! I’ll try this… Merry Christmas.. you sound like you’re from Bolton !
@Gladness2023 happy Christmas. Ha in Yorkshire
Hi Simon
Love your videos and advice. Just one question I like to ask you. I’ve got the Graco 9:5 Pro Comp with the 2 litre pot. Is there a actual video that you can recommend or you’ve done to go through the complete set up. There are no instructions that so it mate
Thanks again and keep the brilliant videos and advice coming
Kind regards
Mike
Hey mate appreciate the support. What is it youre struggling with. The what to actually do with the pipes etc? I can sort a video out in the next couple weeks. Show mine set up with a pressure pot. Basically same principle just youres would have a hose connected to the machine
Hi mate. Thanks for your reply. I’ve got the gun and pot all set up and connected to the turbine unit. It’s just how to get the pressure in the pot. I’ve seen some other videos that say you need a 18” - 20” jet of paint and then you spray it into a measuring cup for 15 or 30 seconds. Just a bit confused that there is absolutely nothing about setting it all up. Thanks again for your help and it’s nice to know that I’ve got someone to go to. Thanks again and for all the help. Your videos are spot on by the way. So helpful. Keep up the excellent work too. Talk soon 👍👍👍
Hi Simon
Hope your well mate
Could you please let me know when your doing the video on the full set up of the Graco 2 litre pot. Thanks again for all your support and help. I wish everyone was as helpful as you mate. Speak soon 👍👍
@@mikedavis6800 cheers bud. Probably delayed now as the workshop i was moving into fell through. If youre on facebook or insta you can find me on there and i could probably talk you through it easy enough if that will help
Thoughts on the Fuji semi pro as a fine finish gun?
hey. semi pro 2? IF so its not a very powerful unit. you should look more to a mini mite 4 or Q4 minimum in my opinion. Also the gun on the semi pro is the M series which is ok. but its not as nice as the T series which come with the other units. try and aim for a 4 stage minimum unit as that would be around 9psi power. the 2 stage units around like 5psi. 3 stage 6 to 7psi . 4 stage is 9 and 5 stage are 9.5
👏👏👏
Hi Simon, do you clean your spray gun after each use?
Depends how often im using it. So long as the needle end isn't dried up it should ve fine. Ive often put a bit of tape across the horns and tip end before but making sure ive cleaned the end fitst so no dried paint forms.
Inside should be air tight so should take a while for it to dry.
What approx psi for gun like that.
The turbines are max psi to the gun of 9.5psi coming from a 5 stage turbine.
The guns are made for turbine use not compressor
Ammonia or diluted ammonia. Soaked in warm/hot water and 1 big spoon of borax powder
Great vid, but the constant subscribe popups get in the way of what you're doing. Don't get me wrong, I appreciate the content a great deal - just an opinion.
Thanks for the feedback. I try to place them away from detailed areas but weirdly thought they seemed larger this time. Will adjust for the next one. Thanks for the support
@@sprayaholic No worries mate. Like I say, love the content!
@@Maghanashi thats great thanks. Any feedback helps