The product shipped to me in about a 2 days, everything was included in the kit. I went by the video for installation and they installed perfectly. They are extremely bright, which I like, and look fantastic on my 2013 Spyder RT. It took me about 5 hours for installation on both sides from start to complete finish. Hope this helps with your buying decision, I am really pleased with mine.
Just received my light kit and also saddle bag light , purchased 3Rd brake & turn signal lamp hitch and BaJa Ron sway bar I have some work to do. Love my Spyder
Please add An OEM style plug to allow the installer to tap blinker signal at the mirror, similar to the one supplied to supply power for running lights.
I can't find these for the 2013. they are the same lights .the 3012 are totally different style.but sling mod told me they don't have them for the 2013.surely somebody makes them I have seen them on UTube on a 2013
I've those, not very pleased with quality. it's a fancy looking for sure but after few years many leds in a red cluster went dead, now I have to replace all of it again...
Any suggestions or comments about the body panels on a ST-S? I got the fenders all done and installed plus the A-arm LED's on in about 90 minutes. However when it came to running the wire up for the turn signal I just do not see how the panels come off or how the mirror comes off. I wonder if I can locate the turn wires from behind gauge cluster and not disassemble all the body panels.... Thoughts?
Hello Guy, my apologies sir... we don't have an ST-S at the shop to verify this for you. I know the mirrors used on the ST models are the same as the F3T/F3L models but I'm not 100% sure if the removal process of the mirrors is the same. We have all the newer F3 and RT models.. but regretfully not the ST-S. 😥
looks nice i want some for my now but the funny part is i never use my turn signals lol i use most my arm 50/50 sometime 🤣😂 but its still looks cool on them.
The left red sequential has started to burn lights on my 2014 RTL, can I buy just the left red strip light or do I have to purchase the whole kit again? I am going to Spider Quest meet and I don’t want to show up on my Spider with fender lights that don’t work as they should. Thanks
Hello Ghislain, please contact our customer service team with the link i've provided, so that we can get that handled for you. www.slingmods.com/index.php?route=information/contact
Hello Horizon, many customers have their local dealers install our mods. It'd be best to send your dealer the installation video and have them quote you out for labor prior to bringing your bike in. Hope that helps!
@@horizonfurniture Ah.. that's a bummer. We call those "Stealerships". Lol. You may try a local stereo shop as odd as it sounds. It's all low voltage 12v stuff.. that they're very use to working with! Best of luck!
The product shipped to me in about a 2 days, everything was included in the kit. I went by the video for installation and they installed perfectly. They are extremely bright, which I like, and look fantastic on my 2013 Spyder RT. It took me about 5 hours for installation on both sides from start to complete finish. Hope this helps with your buying decision, I am really pleased with mine.
Most of the instructions are correct. Take the mirror off to make reinstallation of the mirror housing easier.
Just received my light kit and also saddle bag light , purchased 3Rd brake & turn signal lamp hitch and BaJa Ron sway bar I have some work to do. Love my Spyder
Awesome Joseph... Enjoy the mods!
They are worth every dime. Its a must have. One red led didnt work rite. Tric took care of that.Once i get the lite i will make a video.
Dang, that looks easy enough for even me to do. Now, if I can only talk "She who must be obeyed" into letting me get a set of these.
Lol.
Please add An OEM style plug to allow the installer to tap blinker signal at the mirror, similar to the one supplied to supply power for running lights.
Thanks for the feedback on this RH! We'll look into this.
So many accessories for the 2013+ I wish was made for the 2011
Hi It says 2013 to 2018 but my 2013 sts has a different fender, and different lights. What am I missing here? Is there another kit?
These work on the 2015 f3s too?
Yes they do! All 2013-2018 Spyder's have the same front fenders!
On later yaer F3S the turn signal lights are on the front fenders so how is the wiring different, where would we tap?
My bad, I see there's another video
Can you please do a video for the 2016 Spyder F3S please
I can't find these for the 2013. they are the same lights .the 3012 are totally different style.but sling mod told me they don't have them for the 2013.surely somebody makes them I have seen them on UTube on a 2013
2012 sorry not 3012
I've those, not very pleased with quality. it's a fancy looking for sure but after few years many leds in a red cluster went dead, now I have to replace all of it again...
Any suggestions or comments about the body panels on a ST-S? I got the fenders all done and installed plus the A-arm LED's on in about 90 minutes. However when it came to running the wire up for the turn signal I just do not see how the panels come off or how the mirror comes off. I wonder if I can locate the turn wires from behind gauge cluster and not disassemble all the body panels.... Thoughts?
Hello Guy, my apologies sir... we don't have an ST-S at the shop to verify this for you. I know the mirrors used on the ST models are the same as the F3T/F3L models but I'm not 100% sure if the removal process of the mirrors is the same. We have all the newer F3 and RT models.. but regretfully not the ST-S. 😥
looks nice i want some for my now but the funny part is i never use my turn signals lol i use most my arm 50/50 sometime 🤣😂 but its still looks cool on them.
Thx Joker! Well, if you change your mind.. we're here for ya!
The left red sequential has started to burn lights on my 2014 RTL, can I buy just the left red strip light or do I have to purchase the whole kit again?
I am going to Spider Quest meet and I don’t want to show up on my Spider with fender lights that don’t work as they should.
Thanks
Hello Ghislain, please contact our customer service team with the link i've provided, so that we can get that handled for you. www.slingmods.com/index.php?route=information/contact
I just received mine for my 2015 RTL, will i have the same issue?@@Slingmods
Is there a similar product for the 2010 RT?
Hello Ashley, my sincere apologies.. but we do not offer a version of this mod for the 2010 RT.
I need for 2019 spyder f3??? When will these be available?
Soon. We're buttoning up the harness. The MFG will be flying down to our studio once the harness is complete to do the install with us. Thanks.
@@Slingmods great news!! So excited for spring
@@vgcamaj1 Likewise! :)
Need someone to help with this install in long island ny
Hello Horizon, many customers have their local dealers install our mods. It'd be best to send your dealer the installation video and have them quote you out for labor prior to bringing your bike in. Hope that helps!
Yeah, can't go to dealerships... they are all very dishonest unfortunately here in NY.
@@horizonfurniture Ah.. that's a bummer. We call those "Stealerships". Lol. You may try a local stereo shop as odd as it sounds. It's all low voltage 12v stuff.. that they're very use to working with! Best of luck!
I need for spyder F3 T 2019 😓💔
Coming soon for the 2019 model F3!
@@spacegreycoralred yup 2019 there a little difference from old model