How To Replace Power Steering Gearbox On International Truck
Вставка
- Опубліковано 7 лют 2025
- See How To Remove And Install International Truck Steering Gearbox. This Video Also Show Steering Wheel And Gearbox Alignment @dairleautoclassicrestorati6892
#truckrepair#gearbox#truckmaintenance
This a guy man God bless him. Thank you for this video.
@@rambro24 Thank you!!
Great video! Thanks!
@@robertovillalon2841 Thank you!
Great video finally someone that shows you how it's done I've got a 96 IT dt466e never worked on diesels before trying to learn as much as I can. Can't seem to find any manuals that don't cost an arm or leg Thanks keep them coming
Will do! Thank you Sir!
Awesome video. I will be doing mine as well. Thank you very much.
outstanding video! thanks for sharing
@@robstuckey Thank you!
Thank you. I viewed this video to help me study for my class A exam. You were very helpful.
Thank you again!
Like #213
That is Awesome!👍🏽
Great Video, Thank You. What are some common signs your gear box is bad?
Bad Signs:
1. If it is hard to turn one way left or right.
2. Blown Seal causing it to leak badly.
Would you happen to know the torque specs for the bolts that hold the gearbox to the frame? And torque specs for the pinch bolt for pitman arm
THANK YOU so much for the valid information, it REALLY helped me out! New subbie! 💯🤙🏿😜
Awesome! Thank you!
I really appreciate this video!! You’ve got my sub
Thank you Sir!
Thanks
Thank You very much, Is there a reason you did not use a torq wrench? Or did you do it off video? To me steering is to important.
You are right! Steering is very important and I should have showed the torque procedure on video. Thank you
Did you change that gearbox out because you were losing fluid or something else I have a 2011 international and have to top power steering fluid in once a week any suggestions on where it could be going i don't see any leaks
@tonyross5486 On this Chevrolet 3500. I changed it because it was leaking at the Gearbox. I have a couple of Videos changing Gearbox on International. If your Gearbox is dry and shows no signs of being wet. Inspect your Power Steering Hoses.
Thank you!
What did you jack it up for?
Good question, I put the vehicle on a Shop Hyd. Lift.
Do you need to lift the front tires off the ground to replace the steering gear box?
I want to replace my Pittman arm myself but a little nervous. Will I need an alignment afterwards?
No Sir,
quick question, does the steering column has lines so you can match too?
There is only two ways to connect it. If you connect the Column incorrectly you will know right away. If you are not sure after connecting. Do not tighten the Column yet. Turn your steering wheel left and right to be sure. Then tighten your Column.
@@dairleautoclassicrestorati6892 thanks
Do I need to jack up the truck to replace the gear box?
Yes Sir, most of the work will be done under the vehicle.
My friend on the 1999 international 4700 there are two brake lights on the dashboard,,on my one of those lights stays on all the time,,its not the hand brake,,any help what is it and located thank you
Was the gearbox replaced because steering was hard.. like a lot of tension while turning?
It was replaced. Once all the air is out of the system. It turns like normal.
@@dairleautoclassicrestorati6892 is it really necessary to put on jack stands or can it be replaced without lifting?
@Cesar Villegas it is necessary for a few reasons. 1. You will need it lift to help connect the Pitman Arm. 2. It will help also with connecting the Steering Shaft.3. It will help to bleed the air out of the steering system.
@@dairleautoclassicrestorati6892 got it thanks so much man just bought an 8600 international and the steering is pretty tense gonna try the filter first and ultimately the gear box if I see no changes. Thanks for your content though you make it look easy haha
What kind of fluid did you use?
I basically used regular Power Steering Fluid from my local Auto Parts Store.
Hey boss, would it be possible to speak to you over the phone? I have a few questions.
Good video
Hello. I have hard steering on my 2016 International 4300, no leaks or anything..looks like new..It’s 100% steering gearbox? Btw power steering pump brand new..Thanks.
Do you need to lift the front end?
No sir
Can the gearbox be rebuilt?
Yes Sir,
Years ago that was the thing to do. But now days it's so hard to find a shop that will do that. If you do find one. I found the price to rebuild one vs buying a new Rebuild about the same.
@@dairleautoclassicrestorati6892 Whats a good site to purchase a steering box? I found 2 sites but not sure how reliable they are.
Hey man, my steering gearbox (TAS65051) has two lines going into it. I want to replace the two fittings for those lines. How do I figure out what fittings it uses and where do I buy them?
Hopefully you are able to remove them from the Gearbox. If so, take them to a After Market Vendor some place like " FleetPride" to match up the parts. Or you can call your local International Dealer and provide them the last (8) of your Vin#. They maybe able to help you.
@@dairleautoclassicrestorati6892 thank you
Is this the same solution as a power steering system replacement?
Yes,
If you are replacing the Power Steering Pump. It is very important to do the same.
@@dairleautoclassicrestorati6892 excellent thank you. You seem to know alot about internationals. Getting exhaust fumes in cab do you have to take the dash out to fix the problem? Think it’s comin from by the turbo.
@Ryan White Do not bother the Dash. Check under your hood for a Fuel leak. Check your Crankcase Pressure Tube and make sure you are not smelling etc blow-by. Last but least. Make sure all your Exhaust Pipes are still attach together.
@@dairleautoclassicrestorati6892 will do thank you!!
This is nowhere near as complicated as my Mechanic made it seem.
@@uria711 👍🏽 😀