Very very useful for me....i went to hardware shop with the old kitchen tap spindle and bought a new one.... very few tools needed..... thanks a lot for your help.....it costed me 135 per piece in Karnataka.....bahut bahut dhanyawad 🎉🎉🎉🎉
Jolly Jasoos bhai, Tumne jo pahle wale comments me allen key ke size alag alag bataye hain... Usase confused hogaya hain.... Give us correct allen size 1.4, 1.5, 2.5, 2?????
@@jollyjasoos4304 I don't think it's a push fit.i found a small screw their at the bottom of this pipe.Can u tell me the size of the key to remove that screw ?
Handle ke screw jisko L key se nikhal rahe hain, woh screw beech main break ho gaya, half rubber se attach hain woh nikhal Diya par aadha screw uss handle main fas gaya , usko kaise nikhal sakte hain
Very very useful for me....i went to hardware shop with the old kitchen tap spindle and bought a new one.... very few tools needed..... thanks a lot for your help.....it costed me 135 per piece in Karnataka.....bahut bahut dhanyawad 🎉🎉🎉🎉
Thank u alot
Jald we are coming up with new video
It was very useful for me to rectify one of the tap in my kitchen ..thank you very much
😊
Bahoth badhnya bhai! Bahoth detailed information dee aapne. Keep up the good work, sir!
Thenk You Bhaiya
Aap ke video se helf mili hai mujhe
Very useful video. Thank you so much
Very useful information thank you
Thankyou sir apne meri problem solve kardi 😥 ☺
Thanks for the video .. helped me fix the spindle👍🏼
It's very helpful. Thank you
Very useful video ❤❤
Very thanks beta I learnhow to fitting tap
Hankyoubhayya apki wajeh se bhaghair plumber bulae meri tuti theek hogai
Good job
Good information.. it was used for me.. thankyou..
Welcome 😊
THE UPPER COVER TAKEN OUT WITH THAT SMALL SPANNER, WHAT IS ITS NUMBER ?
What is the size of Allen key of plumber taps?
Size pata chali kya??
2/2.5 for the tap shown in video
Very well demonstrated 👏👏
Useful video
Very nice. Useful information,thanks.
Thankyou soo much you helped a lot
Glad it helped
Jolly Jasoos bhai,
Tumne jo pahle wale comments me allen key ke size alag alag bataye hain... Usase confused hogaya hain....
Give us correct allen size
1.4, 1.5, 2.5, 2?????
Spindle ka warranty kitna din ka hota hai
How do you remove the whole tap? The top trunk like part is not coming out even after removing the screw.
Same problem
Thanks...i was searching for this.
Tap kaise change karre plz tell. I have the same tap.
Allen key konsi size honi hai
Yeh wala Jo part hai 01:11 Allen key wala handal ho bahar nikalne wala woh nikal hi nahi Raha , sayad spring jaam ho gaya hai ab kaise nal ko khole
Just transfer ceramic disks and blue gasket from new spindle to old, by this you can avoid gap between snout and spindle
Yaa I was wondering what is that gap at 6:45 ???
thank u i was scearching for this...
Welcome 😊
Can anyone say Allen key size 1.4 mm or 3mm which one we can use
Hello bhai agar nal jaha se ghumta he vaha se pani nikal rha he to kya karna chahiye
Jaha se pani uper jata he vaha se leack ho rha he
Yen pin ko kya bola jata h jisse aap open kiye b
Thank you sir
Ab elenki kha se laye ab alg se lana padega
Ye upr vala bhag hi ghum rha to kya kre.
I have been trying for a long time to open the tap using Allen key. But it is not opening. What to do. Please help.
Nal ka handle ghum Ra par Pani nhi aara kese Shi kre bas wo handle handle ghumra plz bataye
Where can I buy that handle
Please share the link where will get that spindle
Good information
Kya top water tank ke pass water volve off karna hey ya nahi
Ha karna hai.
Tap k niche vo rubber ka nhi h steel ka he h tho kya karu
Tnq sir
Thanks... really useful
very good video sir
without alleng waale tap bhi to hote use lesai repair kare
Wrench Kitne no ya size ki leni hai?
Best to buy and keep a adjustable spanner....very useful for household work
Change karte samay main wall band karna padega kay??
Haa nahi to bhut tez pressure ayega, sahi kar lege but pura bheeg jayege. Or Pani ka pressure tez raha to change bhi nahi hoga!!
THE NUMBER OF ALLEN KEY FOR ITS SIZE
Sir, your video is awesome but video quality is not appropriate. It is flickering throughout. Unable to view it properly. It is affecting the eyes.
What is the size of Jaguar key ?
Mera Jaguar ke t àp me koi hole nahi hai to to use kaise khole, aap ki tarah hai Lekin useke spindle ko khol ne ke liye koi jaga nahi di gayi hai
To aap steel ka chota lever plier se ghumake (anticlockwise) nikalo
What is the tool called which you used to open the splinter?
Pipe wrench
@@jollyjasoos4304 I don't have pipe wrench at home
@@jollyjasoos4304can i open it from different way
@@umeshsingh4611 ideally pip wrench is best tool for plumbing work.
@@jollyjasoos4304 I have the same taps. How can you get the handle/lever as it broke
Agar key na ho to ?
Local handle+ spindle kitne ka aa jata hai bhai.... Please btaiye....
Allen key ka size kinda hai
1.4mm
सर जी वीडियो को थोड़ा जूम करके दिखाया कीजिए ताकि सभी पार्ट को अच्छे समझ सके
Kya ye quarter turn/90 degree turn wale spindle normal tap Mai bhi lag jate hain?????
Andar wala spindal same size wala hai to lag jayega
Yeh sab karne ki koi zaroorat nahin. I just fixed the lever with a bit of Araldite. Perfect.
Wish it last for long time. But it wont help on leakage.
@@jollyjasoos4304 But then you only need to buy a new spindle & NOT the entire assemblt.
For people who are asking for the size of Allen key is 3mm
Was 2.5mm for me (bathroom jaguar fitting of different design)
Original was Flt series and you bought replacement for victorian queen series which has longer rod length.
Yes.
How to claim warranty?
Jaquar customer care
Thank You
You're welcome
But how to remove the curved pipe end.If rotate it will hit the back wall
Usme threads nahi hote woh push karke bithae jati hai. Isiliye aap use eotate bhi kar sakte jis or flow chahoye
@@jollyjasoos4304 I don't think it's a push fit.i found a small screw their at the bottom of this pipe.Can u tell me the size of the key to remove that screw ?
Half turn ghumnewala apke haath me jo cover h chote dandewala woh nahi mil raha.
Hardware shope pe check kijye photo leke jayega milna chahiye
Happy
Washwashing mai pani slow a raha.. What to do .ki solve ho jaye
Problem Kaisey solve karey
Thanks
Sinckcock ka spinda ka size chita bada rahta kya
Ha
Bahut bahut shukria
please use correct type of spanner’s as the tool you are using is for pipes and big fittings.
Hamara screw miss hui kaha miltha screw
Mere nal ka bhi
Sir hot water se Florentine sereis ka spindle baar baar kharab ho raha hai..plz help
zzzz
Cruve nakane ke baad, nul nhi nikal rha
ऐलनकी का क्या साइज होता है
Allen key mm size
Tap ki cap ki cost kitni h
What size or numer alky is ??
1.4mm
thank you very well done
Value price
Usually good one start with 200 and depend on brand and quality
Sandarbh ka o ring change karne se e ho jaye ga 450 rupiye kharach karne ki koye jarurat nehi 10 rupiya ma e ho jaye ga
Awaj AA Rahi hai to kya kare
Size of Allen key? Pl
2mm or 2.5mm
What is the size of LN Key??
1.4mm
Kaun sa shop me L key milega
local Hardware , online amazon , flipkart sab pe available hai ..
Ye milta कहा h isko kahte kya h
Hardware shops pe mil jayeg, pipe wrench
Thanku sir me le aaya pic dikha कर fit v कर दिया thanku
I don't have the key, how do I open it???
Try to check in local hardware shop. You will get it easily. Generally available in set of different size.
@@jollyjasoos4304 thanks I bought the key
What is fosset length
Jaquar ka spindal kitne ka attha hai
Original 350-450 hai
Good video, add key number to open
It 3mm L key, you will get it any hardware shop. Dont go for cheap on as it wont be usable after few usage.
6:45 pe aapne null ko pura andar toh nahi kiya, aisa kyu?? Fitting loose hai.
Spindle bada wala aa gaya tha isiliye pura andar nahi ja paya
Upper se leak ho raha hai
Alenki Pana konese namabar Ka lagega
ji wah
What is Alan key and where to buy it 🙏🙏
It 3mm L key, you will get it any hardware shop. Dont go for cheap on as it wont be usable after few usage.
@@jollyjasoos4304 sir ji kya isko screwdriver ki tarah ghumana parta hain
Ha woh ek screws hi hota hai bas, uski grip undarse hoti hai
Handle ke screw jisko L key se nikhal rahe hain, woh screw beech main break ho gaya, half rubber se attach hain woh nikhal Diya par aadha screw uss handle main fas gaya , usko kaise nikhal sakte hain
@@jollyjasoos4304 it's 1.4 mm or 3mm Allen key
Bhai lay isaka original nob nahi milata kay
Milta hai par costly hai bcoz of brand
jaquar par kaun kaun sa nob lag sakta
Mera bhi same tap hai aur leakage kar raha hai
Tap kaise replace ker sakte h
Same way as shown in video
Pl send original spendal
Alen key which number
1.5mm
The spindle and the handle is not original one,look at the gap between handle and the body...
I got the wrong size
Aapne JAGUAR se warranty claim kyu nahi ki ???
Bhai jaguar ki company ki tap hogi tabna
@@mdfurquan7128 Jaguar hi hai bhai aisa yeh keh toh rahe hain 🙆🙆🙆
@@crazylove2426 ha bhaijan appne sahi kha👍