Great bike build, they are lucky to have you building bikes for them, id love that bike! Good ole bmx, loved bmxing as a kid/youth/young man, can still 180 bunnyhop a bmx... I bet a hub powered bmx is fun, fun, fun!!!! Ebike kid's got it great with his setup, sure is wholesome seeing you do stuff with him/for him, too many kids are all about the consoles nowadays... Its good to see you all hanging out having fun, good times dont cost much and he/you will always have such great memories.. Good times.
A great alternative to the wiring loom is black gaffer tape. It's matte black and binds everything together really well. Would work great at covering up all those wires coming from the controller, so they don't stand out.
@@E-bikeguy hahaha that’s good to hear that shows your work is good and it also shows in the smiles I’m sure he had! Congrats on everything man looking forward to your review of the S2! Proud of your consistency and appreciate the knowledge you share with us them sending a bike to review is nice!
Another Ruff N Tuff Tonka Looking build! My e bikes all have that bandage appeal of my extra battery wrapping and location on top front bar, but they faster than the 3000$ e bikes. This build is eye candy!!!
I recently did my 1st hub motor build, I'm used to mid drive. I do like it but I had that same noise coming from the wheel turned out to be loose spokes. Keep up the good work!
That's clean with the wires from the controller going to the battery bag. I've had that issue before with a wobbly wheel which turns out to be a poorly seated tyre. Also some of the cheap tyres also have a bad tread pattern, not being true due to manufacturing. Although the rim is true, it's annoying as hell seeing the tyre pattern wobble.
Yo E B4L, I have great FYI on understanding a certain limit of speed on e bikes. I really have to start wearing motorcycle helmet or hard cap because I was just going 30mph of 100 feet distance, as I came to my next left turn, I was wearing headphones and didn't hear the blow out but I'm always feeling my handlebars of motion as I almost had a side out fall when turning left but I balanced my body to counter the off balance. I almost crashed if I turned handlebars too left of my left turn. Just going 30mph and from now on, I'm wearing my helmet , no BS anymore or I end up quadeluptic or paralyzed ( seen many UA-cam videos of bikers crashing to be paralyzed from those falls) . It's serious more for the high possibility over the high speeds around 36 and faster. Them blow outs are DANGEROUS and nothing if nothing serious happened. Ya kids E, take no chances, teach them the 411, better safe than sorry if they have e bikes over 30mph. You too ,lol, but the helmet is very personal of using or not but I'm learning off this near mishap of deep crap...
@@E-bikeguy cheeses christ E !?! Saw the other video you posted going 60plus.?. Not sure if it was a statement of 72v but cheeses E, you along the cars,lol. Mannn, I'm always having you on thoughts of a daily safe day weekly. But likely you no flake with ya kids of fyiing them the helmets.
@user619tlsdca5 yeah lol I never would go that fast especially with the kids they will have some sort of gear on lol thank you tho I was a little scared tho
@@E-bikeguy Always on my mind once I'm cruising at 32mph plus. The thought of feeling the speed hoping not to have sudden blow out and why I'm always feeling out my handlebars of handling it proper of not wanting a front jack knife twist that will send my body forward of same speed flow. So far past year, 3 times had blow out when turning left at 32plus mph. I think I just need to slow down more before turning but very sound of being aware of feeling out physics and handling.
Nice job. Did you ever mount a 175mm wheel in a 190mm dropout bike? I have a geared wheel from another bike I am upgrading and another bike. Its a steel frame I may be able to just bend i or just tighten the nuts to squeeze it. But if not how to add spacers to inside? How much on each side? And do I need a cassette or free wheel spacer? I know a caliper/ torque arm spacer is needed mounted on the inside.
I have a 7245 also, and an SW 900 display.I cannot get the speedometer to work.Any suggestions on which wires go to?What And I am also setting it up for a 60 V 20M.H battery any suggestions on the parameter settings for discharge rate
Nice videos Ebike Guy, I also have the 45a sabvoton controller, but I notice that I can not select hard start…I can only do 3speed or boost which is ok but I want to speed on the jump. Is it not available on the 45a controller but is on the other ones? Im looking to upgrade to the 80amp or 100amp controller for the hard start option. Keep up the good work 🔥 👍🏾
Please, please stop making such interesting videos. I'm now getting it in my head to modify my scooter and build an e bike. I'm too compulsive to get into new things, please spare me.... Lol! Great vids, but you really are giving me the bug. I'll be watching.
@@stuffdo_er what you thinking of building? I'm on with my 1st build, 1500w 48v with 52v 20ah battery, it's a Voilamart kit... I know it won't be anything special, but should be a lot of fun and help with the damn hills where I live.. Ebike guys been helping me with his knowledge/advice, I know I'm already bitten by the bug as I just been looking on eBay at these sabvoton controllers...not cheap, but I guess you get what you pay for, maybe in a few months I will update my controller to one.
i feel a wobble in my mtx39 rim, not from side to side, but up and down. i never hit a curb or something. brand new, i even checked it with a wrap tie. only dont know how to fix that
Ive yet to buy a fat tire due to my limited income of not going over a grand. My best bet is to spend 400$ on a regular fat tire bike to convert to e bike, but im still on being cheap,lol.
I just got my 45a controller for my ebikeling 1500w 52v setup but idk where to start with programming it because I don't know anything about my battery got the kit and battery used
This late asl but im having issues with a sabvaton and wanna try getting new one is your controller labeled sabvaton or Risun motor? I noticed there's 2 different batches of these
Each bike got cleaner as you made them NICE
Thank you, as always. I'm getting it down pat 😆
Great bike build, they are lucky to have you building bikes for them, id love that bike!
Good ole bmx, loved bmxing as a kid/youth/young man, can still 180 bunnyhop a bmx...
I bet a hub powered bmx is fun, fun, fun!!!!
Ebike kid's got it great with his setup, sure is wholesome seeing you do stuff with him/for him, too many kids are all about the consoles nowadays...
Its good to see you all hanging out having fun, good times dont cost much and he/you will always have such great memories..
Good times.
Lol heck yeah. They love it
Your channel has been popping up for me randomly this week. Been a huge bike rider my whole life. Love your videos!!!!
Thank you bro! Glad you liked them as I have more coming up soon
A great alternative to the wiring loom is black gaffer tape. It's matte black and binds everything together really well. Would work great at covering up all those wires coming from the controller, so they don't stand out.
Oh ok, I would like that, where you get it from? Amazon?
@@E-bikeguy yep even your local stores should have it. Black Electrical tape
@@landisburnett6035 he so happy, he didn't give me time to make the wires look good they left the next day back to maine
@@E-bikeguy hahaha that’s good to hear that shows your work is good and it also shows in the smiles I’m sure he had! Congrats on everything man looking forward to your review of the S2! Proud of your consistency and appreciate the knowledge you share with us them sending a bike to review is nice!
How fast does this bike go
Another Ruff N Tuff Tonka Looking build! My e bikes all have that bandage appeal of my extra battery wrapping and location on top front bar, but they faster than the 3000$ e bikes. This build is eye candy!!!
😍 thank you bro 💯 👊 it's for my in-laws and I wanted it to look the best when they come to ride it!
I recently did my 1st hub motor build, I'm used to mid drive. I do like it but I had that same noise coming from the wheel turned out to be loose spokes. Keep up the good work!
Thank you, but yeah just tighten them up a bit you be good to go
Just subbed, enjoyed your ebikes and your family! I plan on converting my bicycle to electric power soon
Thank you 😊 I glad you liked the videos, and you will fall in love in you ebike once you build it and ride it.
Hi mate good to see you building more ebikes have you got your own controller sorted yet hope you and the family are all doing good 🚴♀️🤘
Lol not yet I'm saving up to get the controller and battery but yes thank you for being there!!!!!!
That's clean with the wires from the controller going to the battery bag.
I've had that issue before with a wobbly wheel which turns out to be a poorly seated tyre. Also some of the cheap tyres also have a bad tread pattern, not being true due to manufacturing. Although the rim is true, it's annoying as hell seeing the tyre pattern wobble.
Heck yeah I definitely thought it was the rim till looked at it while riding, that was crazy tire wasn't seated on the rim right.
Great looking bike again !!🎉 I would zip tie the wire together in the front of the bike just to make a little cleaner but love your vidoes
Oh yeah you is right. I'll do it tomorrow when they come back over tomorrow.
Great video bro and bike for the fam 👍
Thank you 😊 💯💪🏿 they loves it
Yo E B4L, I have great FYI on understanding a certain limit of speed on e bikes. I really have to start wearing motorcycle helmet or hard cap because I was just going 30mph of 100 feet distance, as I came to my next left turn, I was wearing headphones and didn't hear the blow out but I'm always feeling my handlebars of motion as I almost had a side out fall when turning left but I balanced my body to counter the off balance. I almost crashed if I turned handlebars too left of my left turn. Just going 30mph and from now on, I'm wearing my helmet , no BS anymore or I end up quadeluptic or paralyzed ( seen many UA-cam videos of bikers crashing to be paralyzed from those falls) . It's serious more for the high possibility over the high speeds around 36 and faster. Them blow outs are DANGEROUS and nothing if nothing serious happened. Ya kids E, take no chances, teach them the 411, better safe than sorry if they have e bikes over 30mph. You too ,lol, but the helmet is very personal of using or not but I'm learning off this near mishap of deep crap...
Hey E, stay safe so you be saving others. You good people and life around you is important for those around you.
Heck yeah I do understand we is going to do a long ebike ride we going to get some gear, anything can happen along the way lol
@@E-bikeguy cheeses christ E !?! Saw the other video you posted going 60plus.?. Not sure if it was a statement of 72v but cheeses E, you along the cars,lol. Mannn, I'm always having you on thoughts of a daily safe day weekly. But likely you no flake with ya kids of fyiing them the helmets.
@user619tlsdca5 yeah lol I never would go that fast especially with the kids they will have some sort of gear on lol thank you tho I was a little scared tho
@@E-bikeguy Always on my mind once I'm cruising at 32mph plus. The thought of feeling the speed hoping not to have sudden blow out and why I'm always feeling out my handlebars of handling it proper of not wanting a front jack knife twist that will send my body forward of same speed flow. So far past year, 3 times had blow out when turning left at 32plus mph. I think I just need to slow down more before turning but very sound of being aware of feeling out physics and handling.
Awesome build u do great work 💯
Thank you very much 😊
Nice job. Did you ever mount a 175mm wheel in a 190mm dropout bike? I have a geared wheel from another bike I am upgrading and another bike. Its a steel frame I may be able to just bend i or just tighten the nuts to squeeze it. But if not how to add spacers to inside? How much on each side? And do I need a cassette or free wheel spacer? I know a caliper/ torque arm spacer is needed mounted on the inside.
Yes, it's a 170mm but what I like to do first is to make sure I have proper clearance with the caliper to motor then add spacers when needed
I have a 7245 also, and an SW 900 display.I cannot get the speedometer to work.Any suggestions on which wires go to?What And I am also setting it up for a 60 V 20M.H battery any suggestions on the parameter settings for discharge rate
Nice videos Ebike Guy, I also have the 45a sabvoton controller, but I notice that I can not select hard start…I can only do 3speed or boost which is ok but I want to speed on the jump. Is it not available on the 45a controller but is on the other ones? Im looking to upgrade to the 80amp or 100amp controller for the hard start option. Keep up the good work 🔥 👍🏾
Heck yeah 💯 the hard start is not available on the 7245
@@E-bikeguy ok thanks
@stubanshuberi8793 no problem 😊
Please, please stop making such interesting videos. I'm now getting it in my head to modify my scooter and build an e bike. I'm too compulsive to get into new things, please spare me.... Lol! Great vids, but you really are giving me the bug. I'll be watching.
Lol I'm so sorry I promise to keep making great content for you and the rest so you'll can become a diy-er
You're not alone! It's addictive viewing ain't it!?
@@mickyb.8014
Yup, itching to build something now.
@@stuffdo_er what you thinking of building?
I'm on with my 1st build, 1500w 48v with 52v 20ah battery, it's a Voilamart kit...
I know it won't be anything special, but should be a lot of fun and help with the damn hills where I live..
Ebike guys been helping me with his knowledge/advice, I know I'm already bitten by the bug as I just been looking on eBay at these sabvoton controllers...not cheap, but I guess you get what you pay for, maybe in a few months I will update my controller to one.
Nice clean build bud! Really nice, how much watts is it pulling
Thank you, I believe about 2000w to the motor, pretty quick tho
i feel a wobble in my mtx39 rim, not from side to side, but up and down. i never hit a curb or something. brand new, i even checked it with a wrap tie. only dont know how to fix that
Might need to balance the wheel
Ive yet to buy a fat tire due to my limited income of not going over a grand. My best bet is to spend 400$ on a regular fat tire bike to convert to e bike, but im still on being cheap,lol.
That's what I did and this bike was the only one that's 24in and the cheapest I could get
nice.
Awesome! Aloha from Hawaii!
Thank you, I'll have more coming soon!!!
High can I use 45amp controller on a 1500wat kit and 52v 20amp battery thanks
It's easy, my wife has a complete kit from ebay 320 bucks with a nb power 45a sine wave controller 48v to 72v
I just got my 45a controller for my ebikeling 1500w 52v setup but idk where to start with programming it because I don't know anything about my battery got the kit and battery used
This late asl but im having issues with a sabvaton and wanna try getting new one is your controller labeled sabvaton or Risun motor? I noticed there's 2 different batches of these
Oh ok my controller is a risun motor 7245
Thanks gonna get that one helps allot
Nice bro!
Thank you bro
@@E-bikeguy you're welcome.
Do you know what wires are used for 3 speed switch? Also how to unlock?
Have not gotten that far with the 3 speed switch but to unlock the sabvoton controller has to be done in advance
Do you know how to unlock it? Thanks for the quick reply
@jerichogeronimo1974 no lol but there is a guy that can on the sabvoton furoms but I I get mine dine from my supplier on aliexpress
What would this cost me to build?
Wanting a ebike for my wife.
No problem, if I built it for you, it will be 2,500 plus shipping or it you pick it up it will be cheaper.
Hi, where do you get your battery bags from? What size is this one? Thanks
I get the bags from ebay and it's a 48v 20ah
Hi man i from pakistan give me bikecycle your plzz reply me answer my talk
Ih there. I can build you one.
I do not know! Where are you live?
@bad.boy007h5 I liv3 in the u.s in Florida