My garage is full of tools and stuff so I do all of my rebuilds in my driveway which I really don't mind since I like the fresh air and plenty of sunlight. I don't make too much noise so I'm cool with all of my neighbors therefore they don't complain :-)
Without doing a reveal the only thing I'll say that there was no issue with headlight... I left a clue as to what the issue was at the very end of the video as I panned the camera from one side of the car to another. It's not supper apparent, but once you spot it then you know 😉
Shouldn't be too long until next video is posted. I'll try to push it up in a week or so but I'm sure that once I'll make it known and you go back to the very end of this video then you'll see it right away :-)
Thanks for watching! At one point I did not know how to measure and once I learned it was like a huge revelation to me. Now it's time to pass on what I've learned onto you guys 👍
Your body work techniques are second to none. I always enjoy your videos because your technique is unique and result oriented. Keep up the good work 🎉🎉🎉🎉❤
Thank you! 😊 I'm not really sure how much talent has to do with it, I think I would mostly credit the amount of knowledge that I've gathered over the past 20+ years, and I am also a perfectionist by nature so I believe that plays a role in the quality of outcome 👍
You're getting about 16% likes on your video at the moment. That's a bit higher that I've seen on other channels, so it seems that more people like your videos. You always get a like from me of course.
@fix206 Ооооо, ты русскоязычный! Извини не знал. Всё отлично, страна живёт. По поводу Трампа позиция различная, кто думает и анализирует понимает, что мало что изменится, как они его называют генерал без армии. Т.е. занял рук.должность но на местах сидят не его люди и ему будет крайне тяжело как и при 1м сроке. Те кто без собственного мнения, испытывают определенные чувства, что ситуация изменится и мол внешняя политика изменится у США. Но почему-то я в этом сомневаюсь, ибо по моему мнению ситуация на Украине не столь опасная, нежели ситуация у Ирана и Израиля. Поэтому всё нормально, люди живут, работают, ездят в отпуска (правда меньше за границу стало ездить), рожают детей, берут ипотеки. Думаю ± ситуация такая же как в других странах.
Да, я русско язычный, родом из Томска, но в Америке уже прожил 30 лет. Здесь после выборов кто-то празднует, а кто-то сходит с ума. Надеюсь что с его приходом все более-менее утрясется и с его помощью закончатся войны. У меня остались родственники и в России и на Украине так что болеть за одну или другую сторону не совсем получается. Ну, ещё пару месяцев а потом посмотрим как и что изменится...
@fix206 Молодец, что не теряешь корни и язык не потерял, тем более с отличной грамматикой! Моё уважение ❤️ По поводу ситуации с Украиной, ты правильное решение принял, тут идёт большая политика, а люди вешают личностные ярлыки разделив людей. Я уверен всё наладиться, правда потребуется много времени и усилий. В Томске был в прошлом году, пиво не плохое, не скажу что хорошее, но не плохое 😁 Давай не деградируй, не теряй свои корни и язык, ты красавчик 💪
Great Video thanks for showing everything you do. Makes others feel like it is possible to fix stuff on my own rather than getting ripped off at body shops thanks again
Thanks for your videos great job, really enjoyed watching your video. I have a 2010 rolls royce ghost and i have an issue where the hood latch is not working and i am unable to release the hood, im not sure if the cable has snapped or its come out somewhere. Any advice on how i can get the hood to open? Really appreciate for any help.
Like always amazing video. Can’t wait to watch the second part. Also, do you have any tips? To spray something with the weather like right now in seattle I wanna spray a tailgate
Thank you! Next video will be out soon. And as far as painting outside I dropped quite a few suggestions in this video: ua-cam.com/video/x4jQT5kBZhs/v-deo.html
I will assure you that I will never use most if any of these techniques, but it is always good to know methods to call BS or know if you are getting a good deal or bad damaged repair car. I don't know what they will say when I bring a tram gauge to a used car dealership, but I already know they hate it when I do the old school underbody checks, magnet, and shock movement tests.
This Rolls is certainly a much easier rebuild than the last one. Waiting to see what the major issue is, so hopefully your next video won't be too far away. I wish you had more time to upload videos sooner, but of course you have a life to live and it's not on UA-cam videos.
I should have the next video out in a week or two max. I'm going on vacation for 10 days at the end of this month so I have to have it done and posted before then.
If you know what you're doing you don't necessarily need a fancy facility or a controlled environment. I am in a position that even if I bought a spray booth I would have nowhere to put it...
Stupid question / title: If any one has seen the way in which you fixed the other RR, then YES! - You will be able to do it (Now I am going to watch the video 🙂 )
Are you able to please help me rebuild the frame damage on my dream car? It was t boned but Ive wanted this car for years. I’ll travel to wherever you are to get this job done. Please help me out.
Very much agree but no complaints afterall they're his cars. He has an acquired taste but boy does he knows how to make great videos that keeps you hooked.
Hi well done you keep it up you are doing a great job and having fun making some brilliant videos superstar Ali Walsall west midlands england junction 10 m6 Walsall churckery up the walsall
It usually works out. As with any job, you have to make sure that the amount of effort and time you put into it is going to be reflected by how much you're going to get paid. And since this is not your run-of-the-mill car, I put more time and effort into this repair to make it just about flawless and I also charged accordingly...😎
Glad to see someone still actually rebulding cars and teaching their skills to the community. Loved the laser level trick! Thanks!
I appreciate that !!
What good work you do always in joy your videos and learn from them ! Thank you…
My pleasure!
Hi am your new follower from Iraq 🇮🇶.Thanks for sharing your techniques and talents with us.awesome video thanks
Welcome to the channel! Hope you enjoy the videos.
What a hero to repair a Rolls Royce. I am very impressed!
I appreciate that !!
Very simple, but clever, pulling technique with that pry bar, clamp and wooden blocks, subscribed
Thanks for the sub! And welcome aboard !
Amazing work. Very skilled craftsman. Congrats.
Thank you, I appreciate you checking out my video!
Thanks for sharing your techniques and talent with us...
My pleasure 😊
Hi am your new follower from Kenya 🇰🇪 living in Qatar 🇧🇭 . Awesome videos
Thanks for subbing! And welcome aboard !!
Love your style and techniques. We need to normalize fixing old parts and reusing them. I’ve subscribed and will be looking out for the next video!
I am a big fan of reuse and recycle, main reason it's because I enjoy fixing/building stuff. And I also like to save money :-)
@@fix206 agreed!
Great video I’m surprised you doing this in your driveway Neibor never complain
My garage is full of tools and stuff so I do all of my rebuilds in my driveway which I really don't mind since I like the fresh air and plenty of sunlight. I don't make too much noise so I'm cool with all of my neighbors therefore they don't complain :-)
Can u make a video on how and where did u learn all this amazing skills. Maybe like a history of ur learning journey.
I'll touch on that in some of my later videos. But believe it or not, a lot of the stuff that I know I learned right here on UA-cam 😎🤣💪
Ghaddamn you're good!
@@jaydawg7200 I try :)))
I am very very thankful for you man you help me so much at my work place you always my teacher hope you keep going you doing a great a job
Happy to hear that! And always happy to help !
loved the video, first class repairs.
Appreciate it !!Glad you enjoyed it !!
Fantastic workmanship
Thank you very much!
What a cliffhanger! Can't wait to see what it is. My guess is the driver side front headlight.
Without doing a reveal the only thing I'll say that there was no issue with headlight... I left a clue as to what the issue was at the very end of the video as I panned the camera from one side of the car to another. It's not supper apparent, but once you spot it then you know 😉
@@fix206 I rewatched the end, I didn't see it... I guess I'll have to wait for the next one with the solution. Take care and until next time!
Shouldn't be too long until next video is posted. I'll try to push it up in a week or so but I'm sure that once I'll make it known and you go back to the very end of this video then you'll see it right away :-)
Best repair videos, thanks for sharing and removing the mysteries of frame measurements 🤙
Thanks for watching! At one point I did not know how to measure and once I learned it was like a huge revelation to me. Now it's time to pass on what I've learned onto you guys 👍
I did not realize that it was around four years ago when you did that other Rolls-Royce, Time flies.
I did not think it was that long ago but once I referred to my old footage I came to stark realization that it's been that long 😣
Your body work techniques are second to none. I always enjoy your videos because your technique is unique and result oriented. Keep up the good work 🎉🎉🎉🎉❤
Much appreciated! I'm happy you enjoy my videos. 👊
EXTREMELY well done video with really great explanations!
Thank you very much!
WOW, GOD certainly blessed you with some amazing talent!!
Thank you! 😊 I'm not really sure how much talent has to do with it, I think I would mostly credit the amount of knowledge that I've gathered over the past 20+ years, and I am also a perfectionist by nature so I believe that plays a role in the quality of outcome 👍
I'am very impressed in the way that your work
I appreciate that !!
Your work and attention to detail is superb, @ the 18:50 mark you mentioned "oil" but I think you meant to say "coolant".
It was a power steering cooler that was being replaced, and I suppose power steering fluid is more than oil then a coolant substance 😎
Mad respect for this, Cat, great work
Thanks brother, I appreciate it !!
Making it look easy!!
Once you do it a few times, you'll realize that there's not that much to it.
This appeared on my fyp, great driveway effort
It's cool that UA-cam promoted my stuff to the front page 🙏
Great info 👍
Thanks for watching!
Incredible skills, thank you for sharing this 🙏🏽
Thank you for watching!!
Amazing, top notch work!!!
Appreciate it !!
You're getting about 16% likes on your video at the moment. That's a bit higher that I've seen on other channels, so it seems that more people like your videos. You always get a like from me of course.
I always appreciate the likes ! Especially from my longtime viewers such as yourself 😉
Amazing work ….very skilled
Thank you! Cheers!
A new video series, yippee!!!! Can't wait until the next installment. Keep up the great work sir. 👏 👍
Thanks! More to come soon!
@fix206 Can't wait!!!
Молодец, хорошая работа. Привет из Москвы ❤
Алексей, привет! Благодарю за коммент. Кстати, как там в Москве люди смотрят на то что Tрамп выиграл?
@fix206 Ооооо, ты русскоязычный! Извини не знал. Всё отлично, страна живёт. По поводу Трампа позиция различная, кто думает и анализирует понимает, что мало что изменится, как они его называют генерал без армии. Т.е. занял рук.должность но на местах сидят не его люди и ему будет крайне тяжело как и при 1м сроке. Те кто без собственного мнения, испытывают определенные чувства, что ситуация изменится и мол внешняя политика изменится у США. Но почему-то я в этом сомневаюсь, ибо по моему мнению ситуация на Украине не столь опасная, нежели ситуация у Ирана и Израиля. Поэтому всё нормально, люди живут, работают, ездят в отпуска (правда меньше за границу стало ездить), рожают детей, берут ипотеки. Думаю ± ситуация такая же как в других странах.
Да, я русско язычный, родом из Томска, но в Америке уже прожил 30 лет. Здесь после выборов кто-то празднует, а кто-то сходит с ума. Надеюсь что с его приходом все более-менее утрясется и с его помощью закончатся войны. У меня остались родственники и в России и на Украине так что болеть за одну или другую сторону не совсем получается. Ну, ещё пару месяцев а потом посмотрим как и что изменится...
@fix206 Молодец, что не теряешь корни и язык не потерял, тем более с отличной грамматикой! Моё уважение ❤️
По поводу ситуации с Украиной, ты правильное решение принял, тут идёт большая политика, а люди вешают личностные ярлыки разделив людей. Я уверен всё наладиться, правда потребуется много времени и усилий.
В Томске был в прошлом году, пиво не плохое, не скажу что хорошее, но не плохое 😁
Давай не деградируй, не теряй свои корни и язык, ты красавчик 💪
Super.Thank you
Thanks for watching!
Clearly I need better friends. Haha
Amazing work leaning so much Thanks.
LOL... 🤣🤣
You are welcome, got lots more knowledge to pass down to you guys
Impressive work. One could learn a lot from you.
Thank you very much!
Nice work !! 👍
Thanks, I appreciate it!
Looks like it’s too easy for you 🔥🔥
Yeah, it was pretty easy 😎 but look at you now, doing perfect frame pulls with no schematics like a boss 💪
THE phaze "WORK BEAT TALLANT " is right of the window with this guy!!! 1000% tallent 👍👍
Haha... I appreciate that !! 😎
Damm good job!!!!!!!!!!!
I appreciate that !!
Great Video thanks for showing everything you do. Makes others feel like it is possible to fix stuff on my own rather than getting ripped off at body shops thanks again
Most anyone with some basic understanding of how this works can get a lot done...
Your the Pine hollow diagnostics of body repair... Ivan from phd is amazing on theory and application..Qudos....
Thank you for the kind words! I'm glad you like my videos!
Good job 👍
Thank you!!
Glad you post it❤
Glad you liked it, I got the next one in the works!!
Thanks for your videos great job, really enjoyed watching your video. I have a 2010 rolls royce ghost and i have an issue where the hood latch is not working and i am unable to release the hood, im not sure if the cable has snapped or its come out somewhere. Any advice on how i can get the hood to open? Really appreciate for any help.
Like always amazing video. Can’t wait to watch the second part. Also, do you have any tips? To spray something with the weather like right now in seattle I wanna spray a tailgate
Thank you! Next video will be out soon. And as far as painting outside I dropped quite a few suggestions in this video: ua-cam.com/video/x4jQT5kBZhs/v-deo.html
You make cool informative videos.
Стараюсь ! 😊
great video
Thanks you!
Interesting that just yesterday, I was reading your comment on vTuned's Mercedes rebuild. where you mentioned using a laser on your rebuilds.
I comment on videos very rarely, and it's funny that you actually came across one of my very rare comments 😊
Very cool
Thank you!!
Great job, now you have another business
Thank you !!
New subscribers like what you do great job
Thanks for the sub and welcome aboard!!
Nice video.
Thank you very much!
16:00 next time use spirit level bro to measure steepness 😉
Excellence
Thank you very much!
Nice work
Thank you very much!
I will assure you that I will never use most if any of these techniques, but it is always good to know methods to call BS or know if you are getting a good deal or bad damaged repair car. I don't know what they will say when I bring a tram gauge to a used car dealership, but I already know they hate it when I do the old school underbody checks, magnet, and shock movement tests.
You can never know too much 👍
I had a Russian guy who used to fix all my Mercedes. 😅 your voice sounds just like his . 😅 I miss him a lot 🙏🏾
👍👍👍❤️
Brilliant
Much appreciated!!
Cool
Thanks !!
What kind of buddies do you have that are just driving around in Rolls Royces 😂
I guess I got a couple of Baller buddies 😎
🎉🎉🎉
❤️❤️❤️🙌
top job nice
Thank you !!
i really wait for the next episode
Working on it 👍
This Rolls is certainly a much easier rebuild than the last one. Waiting to see what the major issue is, so hopefully your next video won't be too far away. I wish you had more time to upload videos sooner, but of course you have a life to live and it's not on UA-cam videos.
I should have the next video out in a week or two max. I'm going on vacation for 10 days at the end of this month so I have to have it done and posted before then.
👍
👍👍💪
Amazing work! Are you open to customer repairs?I would love to work with you!
As of now I have too much on my plate. Not really looking to take on any more jobs...
You should buy a spraybooth or build one...
Spraying a rolls outside doesn't look nice but good job tho
If you know what you're doing you don't necessarily need a fancy facility or a controlled environment. I am in a position that even if I bought a spray booth I would have nowhere to put it...
Stupid question / title: If any one has seen the way in which you fixed the other RR, then YES! - You will be able to do it (Now I am going to watch the video 🙂 )
I knew I could do it, but I still have to make you guys guess 😎
Do you take jobs on the side? I regularly have cars that need body work and would love to work with you. I'm also in the Seattle area.
As of now I'm not really taking on any side work...
@@fix206 ok thank you :)
Are you able to please help me rebuild the frame damage on my dream car? It was t boned but Ive wanted this car for years. I’ll travel to wherever you are to get this job done. Please help me out.
Price ?
Price for what?
The price of that hood and fender! 😱😱🤢🤮
I did not mentioned in the video the cost of a brand new hood which is a whopping $10,000 😵💫
How do I get in contact with you to do business?
I'm not really looking to take on any more new projects if that is what you have in mind ..
I am not a fan of Matt finishes on cars 🙈
Same here. The other issue I have is clear coat which always seems to have serious problems here in Queensland Australia.
I'm not a fan either. But I will touch more on that in the following video...
Very much agree but no complaints afterall they're his cars. He has an acquired taste but boy does he knows how to make great videos that keeps you hooked.
k@@fix206
Na lie
you have wealthy friends
These are the only two friends I got that have money, everyone else that I know is poor 🤪🤣🤣
Hi well done you keep it up you are doing a great job and having fun making some brilliant videos superstar Ali Walsall west midlands england junction 10 m6 Walsall churckery up the walsall
Where are you located :) What's your contact might have a project :)
😁
Not safe to drive anywhere
You are not wrong about that...
I believe is from Russia they don’t mass around on salvage cars
I learned a lot of what I know from Russian rebuilders 👍
Ok
Ok 👍
Man if you could repair my botched quarter panel on my Acura TL and paint over the entire car I'd be grateful
You'll have to get in line that's about a half a mile long at this point 🤣🤣
How does this work out in Time, Effort, and Money?
It usually works out. As with any job, you have to make sure that the amount of effort and time you put into it is going to be reflected by how much you're going to get paid. And since this is not your run-of-the-mill car, I put more time and effort into this repair to make it just about flawless and I also charged accordingly...😎