I have the full power fac version of this gun in 25 caliber. 60 shots per fill 12 foot per second extreme spread across the 60 shots on a 300 bar fill. Like regularly gets groups under 40 mm at 92 meters. Nearly two years and no leaks. I did however reduce the regulator from 150 bar down to 135 bar. Really an outstanding gun and likely shines in the 12 foot pound version. Not to mention you get a premium gun at a value price. Well done RTI.
Difficult one to be honest as we have had quite a few issues with them. Mine has broken its safety catch, stopped cocking and also developed a trigger sear fault. Fixed the problems and it's turned into a decent gun . We have had to sort everyone before sale so It put me off stocking any more.
sit at a bench with a big bottle you need to load the mags with your little fingers and its a slow job even on the mark 2 gun. unless you spend 250 quid on 5 extra mags. good review though lads keep em coming. ive been shooting for over 40 years. my views are out dated but i dont like chucking money in the bin, hw 100 is my go to.
Does the Air Bottle have the same fitting as on a Paintball gun?? so I might perhaps change the Reg and of course, the Bottle itself, as some Regs are Bloomin Heavy and some are Small and light as with the Bottle itself ? Nobody wants a Steely ?
Love your videos gents, however Tony did you cut Lloyd’s hair with two old spoons with your eyes shut...? Thought I was looking at a drunken older Justin beiber... Sorry Lloyd.
got my new one off you last week after the first one wouldn,t cock and tested it out at the club yesterday and so far it was ok one little problem was if i load it from the right side ive got to seat the pellet but on the left its ok just wondering if you are going to do an update of your rifle Lloyd
You guys always talk about the US when it's about unregulated airguns, but your neighbour countries Netherlands and Belgium also have no regulations. ;-)
All the airfirce rifles have a burst disk i seem to recall ....i miss my old one . IS blackpool air rifles able to get them from the US still they wont send one to me direst because of the moderator export ban in the states ?on the priest , whats it available in on FAC and can you tune them to a specific power ?
Just waiting for Tony to find a gap in his schedule. Hoping to start this Autumn again and the range is 3 foot deep in grass at the moment but will be ship shape for filming :)
Interesting and fun as always gents. :o) One thing I'd love to see is a wide range of pistols and carbines made available with QD adapters, enabling them to run off a remote armoured air line -from a belt/rucksack -regulated air tank (yep including the usual burst discs). That would enable them to be run all day long without changing 12gm CO2 capsules every 30-70 shots, and more importantly the power would be more consistent regardless of temperature. Bonus if a bespoke range came out, they could be Engineered to give 3-4ftlbs, to properly ring steel discs downrange. There are already various one-off Airsoft mods using remote air lines visible online, I'd love to see them for a wide range of air pistols too.
Hi Russ, I've been surprised that teathering a PCP is not more common, especially on higher power rifles, but the connection needs to be at the back - as on this rifle. It's a lovely piece of design, but a bit funky looking, not that cheap and probably difficult to find in the shops. I do not expect to see many sold
Morning Tony, I've seen a lot of tethering in USA bench rest comps, with big CF cylinders for air-hungry high-power big bore rifles. I'd love to see portable tethering for pistols, with pistols designed to take advantage.
One year on, can you revisit this with the lead and bottle off please, I've looked all over and cant find any reviews or thoughts on how this rifle performs with the bottle off
and another problem ive had was when i took the bottle out it was leaking from were you take the bottle out ive done it a couple of times now and it,s ok any ideas Lloyd ive inboxed you at BAR and waiting for your reply
@@richskipper9572 The later ones might be perfect so I don't want the problems with the earlier ones to reflect that, just we took a decision at the time because reliability is very important .
I have made a basic design and can adjust to the dimensions. I shall share the thingiverse link to the prototype after a few adjustments, I hope to get some feedback on design and ergonomics.
If you search: www.thingiverse.com/thing:3023511 I can make and sell. I just need to get some more ABS filament. If I were to make it I would print it in ABS as I don't like the idea of a material such as PLA (being biodegradable) on the airgun, IMO It should last as long as the airgun itself.
still waiting for your reply got another problem now ffs it,s not indexing properly now and miss firing any idea because i,m not really happy with it as its the second one
Is it a Wig ? Surely no one would leave it cut like that... Maybe Lloyd thinks its TACTICOOL... and as for your Boar War Comment to Mr T... How dare you ? Next show can you do a comparison between Tacticool Covering materials... a Cats Fur VS Teddy Bear fur would be a great watch !!! Seriously, Well Done Chaps another Great Show
just pricing going nuts for a bit of engineered steel and the extras wow 50 quid for mags. 300 for a barrel that should of been on the guns to start with.the extras should be on the gun for a grand. thought the impact was silly money but this as well. not for me,,,,, and all less than 12fp joke
Czechoslovakia does not exist anymore and this gun is made in Slovenia and sLOVEnia is not Slovakia two different countries Slovenia shares borders with Italy Austria Hungary Croatia and Adriatic sea
I have the full power fac version of this gun in 25 caliber. 60 shots per fill 12 foot per second extreme spread across the 60 shots on a 300 bar fill. Like regularly gets groups under 40 mm at 92 meters. Nearly two years and no leaks. I did however reduce the regulator from 150 bar down to 135 bar. Really an outstanding gun and likely shines in the 12 foot pound version. Not to mention you get a premium gun at a value price. Well done RTI.
Really down to earth stuff. Awesome. Keep up the good work boys :).
only just come across this channel by chance and really like the no frills approach to information exchange, great job.
Would love to see a full review of the Priest from you Lloyd, would be very interested to know how you get on with it.
Difficult one to be honest as we have had quite a few issues with them. Mine has broken its safety catch, stopped cocking and also developed a trigger sear fault. Fixed the problems and it's turned into a decent gun . We have had to sort everyone before sale so It put me off stocking any more.
sit at a bench with a big bottle you need to load the mags with your little fingers and its a slow job even on the mark 2 gun. unless you spend 250 quid on 5 extra mags. good review though lads keep em coming. ive been shooting for over 40 years. my views are out dated but i dont like chucking money in the bin, hw 100 is my go to.
phil fish never go wrong with a hw100
Nice video sir we people in India can only dream of such guns
Does the Air Bottle have the same fitting as on a Paintball gun?? so I might perhaps change the Reg and of course, the Bottle itself, as some Regs are Bloomin Heavy and some are Small and light as with the Bottle itself ? Nobody wants a Steely ?
Looks a bit like the edgun lovely
congratulations matthew............................that scope rail looks low..
Notice tony didn’t comment on the mag price wonder why lol
just bought a .177 impact with the new barrel lloyd i will let you know if i have any issues.
I think the Impacts getting better but there are still issues with FX quality control. Such a shame. I hope you got a good one. Keep in touch :)
Love your videos gents, however Tony did you cut Lloyd’s hair with two old spoons with your eyes shut...?
Thought I was looking at a drunken older Justin beiber...
Sorry Lloyd.
fedaykeen, I NEVER TOUCHED HIM!
@@paulward2668 you sir are a cretin.
got my new one off you last week after the first one wouldn,t cock and tested it out at the club yesterday and so far it was ok one little problem was if i load it from the right side ive got to seat the pellet but on the left its ok just wondering if you are going to do an update of your rifle Lloyd
Half price impact, just as good, 😁👍
You guys always talk about the US when it's about unregulated airguns, but your neighbour countries Netherlands and Belgium also have no regulations. ;-)
Very True, but I guess everyone pays more attention to the US due to the size of the market.
All the airfirce rifles have a burst disk i seem to recall ....i miss my old one . IS blackpool air rifles able to get them from the US still they wont send one to me direst because of the moderator export ban in the states ?on the priest , whats it available in on FAC and can you tune them to a specific power ?
What has happened to more hot air episodes?
You can't leave us hanging like this lol.
How's the shooting range coming along?.
Just waiting for Tony to find a gap in his schedule. Hoping to start this Autumn again and the range is 3 foot deep in grass at the moment but will be ship shape for filming :)
1:12 ...czechoslowakia seized to exist on jan 1st 1993... you probably ment tsjechie right? :-)
No, he ment Slovenia ( RTI Priest home country) wich is not the same as Slovakia ( part of exCzechoslovakia) ....
@@moldovantudorvlad I stand corrected, Thank you .
Interesting and fun as always gents. :o)
One thing I'd love to see is a wide range of pistols and carbines made available with QD adapters, enabling them to run off a remote armoured air line -from a belt/rucksack -regulated air tank (yep including the usual burst discs).
That would enable them to be run all day long without changing 12gm CO2 capsules every 30-70 shots, and more importantly the power would be more consistent regardless of temperature.
Bonus if a bespoke range came out, they could be Engineered to give 3-4ftlbs, to properly ring steel discs downrange.
There are already various one-off Airsoft mods using remote air lines visible online, I'd love to see them for a wide range of air pistols too.
Hi Russ, I've been surprised that teathering a PCP is not more common, especially on higher power rifles, but the connection needs to be at the back - as on this rifle. It's a lovely piece of design, but a bit funky looking, not that cheap and probably difficult to find in the shops. I do not expect to see many sold
Morning Tony, I've seen a lot of tethering in USA bench rest comps, with big CF cylinders for air-hungry high-power big bore rifles.
I'd love to see portable tethering for pistols, with pistols designed to take advantage.
hi Lloyd it work ok done it on mine priest the mag and it shoots ok as well eddie
Thanks for confirming Eddie :)
One year on, can you revisit this with the lead and bottle off please, I've looked all over and cant find any reviews or thoughts on how this rifle performs with the bottle off
We never bought any of the remote leads so can't test in that spec sorry, only with bottle on .
and another problem ive had was when i took the bottle out it was leaking from were you take the bottle out ive done it a couple of times now and it,s ok any ideas Lloyd ive inboxed you at BAR and waiting for your reply
ive seen people in the early days using the sharp inova with a separate bottle.
stuart surkitt the inova was amazing to mod.
Have you done anymore testing on this rifle if so what's ur take on this rifle
i tested the first one in the country and found with just changing the bottle to a standard paintball tank its possible to go over the legal limit
Have you done a review on the RTI MK2 version ?
We didn't stock them as we ended up having a few too many issues with the Mk1's
Probably best to stay away from them then!
@@richskipper9572 The later ones might be perfect so I don't want the problems with the earlier ones to reflect that, just we took a decision at the time because reliability is very important .
Looking around at multiple videos, no one picks the gun up and shoulder it. (?)
Great show. I hope this continues. Wonder what happened to Lloyd’s little cap? Must be summer on your side of the pond.
We saw the sun in the UK, it was scary and hot so I had my hair cut and dumped the hat for a while :)
I can easily 3d design a cheek piece for that just need the dimensions. It will be available for anyone to download on Thingiverse.
Qyuubi786 :I'm at the game fair at the moment, but if I see Bob I'll see if we can get you some dimension from the factory
I have made a basic design and can adjust to the dimensions. I shall share the thingiverse link to the prototype after a few adjustments, I hope to get some feedback on design and ergonomics.
Brilliant . Send us the link when its up . Is it something you could make and sell ?
If you search: www.thingiverse.com/thing:3023511
I can make and sell. I just need to get some more ABS filament.
If I were to make it I would print it in ABS as I don't like the idea of a material such as PLA (being biodegradable) on the airgun, IMO It should last as long as the airgun itself.
@@qg786 If you do make some can you send me a sample to test ( happy to pay) and we will show them on the channel :)
still waiting for your reply got another problem now ffs it,s not indexing properly now and miss firing any idea because i,m not really happy with it as its the second one
Hi David. Sorry but you really need to contact the shop for warranty repair information .
@Happy Day yep mate
Now with Dave Grohl
Where did you get that T-shirt? One of my all time favourite films and TV series.
My all favourite show ! My girlfriend bought me it on Etsy . I've also renamed my house Serenity :)
Great videos again guys. Still no hat lloyd lol
Hi fellas I’m well impressed with the priest, can it be fac’ed in the future if bought as a sub 12lb’er?
Yes should be possible :)
73pleb :but of course it has anti-tamper so it would need to go back to a dealer
How much this air rifle
You have my attention...
How did it turn out the testing on the Priest.
I'm making a video on testing the Priest when we finish the range but so far the results are mixed.
Is the accuracy and consistency as good as a mechanical Daystate or hw100?
So far mine has been superb . It seems as good as my old Daystate Regal but maybe it's the shooter that is the limiting factor .
The poor man's Keanu Reeves.
Colin Morgan : which one of us?
what happened Lloyd did you loose a bet on the range and Tony got to cut your hair? lOL Good show lads..
Is it a Wig ? Surely no one would leave it cut like that... Maybe Lloyd thinks its TACTICOOL... and as for your Boar War Comment to Mr T... How dare you ? Next show can you do a comparison between Tacticool Covering materials... a Cats Fur VS Teddy Bear fur would be a great watch !!! Seriously, Well Done Chaps another Great Show
Rob Taylor : yes, I think we may have opened ourselves up for complaints from the Teddy Bear Protection League
just pricing going nuts for a bit of engineered steel and the extras wow 50 quid for mags. 300 for a barrel that should of been on the guns to start with.the extras should be on the gun for a grand. thought the impact was silly money but this as well. not for me,,,,, and all less than 12fp joke
what has the power got to do with anything? Same materials needed for any power. Also you are a cheapass.
Czechoslovakia does not exist anymore and this gun is made in Slovenia and sLOVEnia is not Slovakia two different countries Slovenia shares borders with Italy Austria Hungary Croatia and Adriatic sea
Yes, I have already been told I'm an idiot ;)
Nice Air cut.
Giovanni m :air you kidding me
TONY BELAS HAHAHA......
RTI priest is from SLOVENIA and not from CZ!!!
Oops :(
FFS Lloyd has hair 😂
no need for all the babble, just crack on and revue the gun