Dont forget to like subscribe & Dont Forget to turn on the Bell-icon!!!! Dont Forget To Follow Me On Instagram: www.instagram.... Facebook: / thatcrazedgunner
I am liking this bike more and more. If the Grom was the same price I might go with the Grom, but this bike offers more for less IMO. The best part about this bike over the Grom is that you don't have to add an oil return mod for wheelies. I'm sold. It's Chinese made but Benelli is in charge of quality control, so it's not junk Chinese made. As for Torq, you can change up the sprockets to achieve better low end.
I'm getting a used..grom new ones are way too much at least I know I can get parts for the Honda.. the Benelli still not easy and dealers are not close at all.
6:11 - thats not the muffler, thats the catalytic converter. thats a emissions restrictions device, if you installed a full pipe system and removed that decat it would run alot better. worthy upgrade. thanks for the video tho, i appreciate it
I'm on the fence between this and a Grom. This doesn't look like a bike that would age well but out of the box it is A) cheaper, and B) has a bit more top speed than a Grom and bits I'd have to buy aftermarket with a Grom (a 5-speed box, DOHC, etc). Grom has much better aftermarket support though. Where did you find a big bore kit for this? If one is available that might be the deciding factor. I want to be able to take the mini bike on highway speeds or I'd already have a Grom.
Dual spark means dual spark plugs. So you have one spark plug on the left side and one on the right. Chimera intake/exhaust/power commander/Michelin pilot pure tires (130 in the rear)
OK, the Benelli is a Grom clone just like the various Vaders. The problem I see most about the clones are poor quality control issues (welding, cheap metal parts, poor quality bolts etc) and the need to substitute Honda parts into the clone to make it more reliable. So, is the Benelli quality closer to the Vader clones or closer to the Grom quality?
I have a question. Just picked up a 2019 model with only 600 miles. When you turn the key to the “on” position and turn the kill switch on, does your check engine light come on? As soon as the red switch on the right is turn on the check engine light comes on. If I turn the switch off while the key is turned to on the check engine light goes away. Is that normal?
Raman George yes both my white one and my dad’s red one both do that. If there is a problem with the bid the check engine light will turn on and stay on while the bike is on.
Yamaha has the yzf r125, but that is a full size bike with full size tires and a tiny engine (for weird European countries with the different levels of motorcycle licenses)
@@Rick_Sanchez_C137_ The yzf r125 engines are great, like 16 or 18 hp compared to the 8.5 hp 125's and this 11.3 hp 135 in the US. You can find them on ebay on occasion. I wish yamaha would make a competitor to these bikes in the US.
surly not... I have a 25 years old Japanese Honda adventure bike.. and its still extremely reliable.. I dont think any chinese bike can make it over 5 years
way better and cheaper then grom .if people could read .they would get it ,and its cheaper i have a grom .im bout to pick up one from the same spot you did i live in vegas hmu sometime well ride
RC Jiffy definitely a great little bike!!!!!!!! Picked mine up at major power sports of Las Vegas! Great place to get a bike!! Shoot me a pm on my Facebook in the description! We can go on a ride sometime!
It does in perfect conditions+ id imagine a light rider just based off of other videos i saw someone going like 72 or 73 on it if their speedometer was right
I am liking this bike more and more. If the Grom was the same price I might go with the Grom, but this bike offers more for less IMO. The best part about this bike over the Grom is that you don't have to add an oil return mod for wheelies. I'm sold. It's Chinese made but Benelli is in charge of quality control, so it's not junk Chinese made. As for Torq, you can change up the sprockets to achieve better low end.
I'm getting a used..grom new ones are way too much at least I know I can get parts for the Honda.. the Benelli still not easy and dealers are not close at all.
6:11 - thats not the muffler, thats the catalytic converter. thats a emissions restrictions device, if you installed a full pipe system and removed that decat it would run alot better. worthy upgrade. thanks for the video tho, i appreciate it
BikeStuff definitely want to add a full pipe!!! Need to save a few bucks up first lol
No storage no problem, wear a backpack lol
Axis Gaming just picked a really nice one up today for my phone and wallet and a water go pro as well lol
ThatCrazedGunner well fuck yeah dude, fuck yeah hahahaahahah
Overall my opinion compared to a grom, the tnt feels better more control it just feels like an overall better bike when it comes to handling
Italian job. Ben tnt 135 = Ducati mini fun bike. Sexy exhaust + water pipe skeleton. Better choice ! 😀😆🤣
I'm on the fence between this and a Grom. This doesn't look like a bike that would age well but out of the box it is A) cheaper, and B) has a bit more top speed than a Grom and bits I'd have to buy aftermarket with a Grom (a 5-speed box, DOHC, etc). Grom has much better aftermarket support though.
Where did you find a big bore kit for this? If one is available that might be the deciding factor. I want to be able to take the mini bike on highway speeds or I'd already have a Grom.
benneli has way more engine swap potential due to the frame design.
I plan on getting a 2022 tnt 135 pretty soon lol
Dual spark means dual spark plugs. So you have one spark plug on the left side and one on the right.
Chimera intake/exhaust/power commander/Michelin pilot pure tires (130 in the rear)
unknownuserno8 that sounds sick man!
Join the US Facebook group! Benelli tnt 135 USA
Will definitely do! And I did not realize this had two spark plugs I will have to correct my self on that.
LOL my father think my bike is two cylinder since it has two spark plugs.. I had to explain to him that it only has one cylinder
OK, the Benelli is a Grom clone just like the various Vaders. The problem I see most about the clones are poor quality control issues (welding, cheap metal parts, poor quality bolts etc) and the need to substitute Honda parts into the clone to make it more reliable. So, is the Benelli quality closer to the Vader clones or closer to the Grom quality?
I have a question. Just picked up a 2019 model with only 600 miles. When you turn the key to the “on” position and turn the kill switch on, does your check engine light come on? As soon as the red switch on the right is turn on the check engine light comes on. If I turn the switch off while the key is turned to on the check engine light goes away. Is that normal?
Raman George yes both my white one and my dad’s red one both do that. If there is a problem with the bid the check engine light will turn on and stay on while the bike is on.
That signal is longer than mine does... Maybe different regulation?
CAN u pop wheelies on it ?????
Where can i connect the gear indicator? Connector location please ?
Yes, tnt135 much better 💪
You mean Kawasaki pro 125 not Yamaha?
yes i did thats my bad lol
You did have me wondering wether I’d been calling a Kawasaki al this time but it was actually a Yamaha 😂
Yamaha has the yzf r125, but that is a full size bike with full size tires and a tiny engine (for weird European countries with the different levels of motorcycle licenses)
Yamaha makes a 125 but not in the states
@@Rick_Sanchez_C137_ The yzf r125 engines are great, like 16 or 18 hp compared to the 8.5 hp 125's and this 11.3 hp 135 in the US. You can find them on ebay on occasion. I wish yamaha would make a competitor to these bikes in the US.
Is there a kit to move the rear lights and license plate? Have you made that switch?
Rick Sanchez C137 Yes There Is, Check Out my Other Video to see.... ua-cam.com/video/UOLDLKJWOxA/v-deo.html
ThatCrazedGunner
Lol, I had actually watched it two videos after watching this one.
how much this bike is comfortable for 5.2 inch height people????
Probably perect
Ruchan Maharjan I’m 5”6 I tip toe so I would go with a lowering kit
I am 1,70 m and I feel very comfortable on tnt...
Dude your tool kit blocks the intake
It looks cool, but it's not a minibike. A minibike is a different class of bikes than this.
Loren Husky 😂 okay, I’m curious what’s the mini class? I need a laugh
2 years on now.. How do you like this bike
He died
How did he die?
Very cute bike
This bike is suitable for dmv m1 skill test?
I’d like to know that too
Benelli 😍👍
Do you think it's as reliable as the Honda?
Yes I’ve owned mine now for 3 months and have 1800 miles on it. I haven’t had any problems
surly not... I have a 25 years old Japanese Honda adventure bike.. and its still extremely reliable.. I dont think any chinese bike can make it over 5 years
way better and cheaper then grom
.if people could read .they would get it ,and its cheaper i have a grom .im bout to pick up one from the same spot you did i live in vegas hmu sometime well ride
RC Jiffy definitely a great little bike!!!!!!!! Picked mine up at major power sports of Las Vegas! Great place to get a bike!! Shoot me a pm on my Facebook in the description! We can go on a ride sometime!
Every one should prefer Suzuki raider 150
IBRAHIM CHANNELZ raider 150 looks stupid😂🤦♂️
@@Surge_Stream it is designed for shorter people like in asia
Funny they put an Italian flag on it when it’s a Chinese owned company and built in china
how much do you weigh? im curious how it would handle my weight of 200 pounds lol
jason h I’m about 132
jason h my dad is about 208 and he said it had fled very very well and he’s able to keep up with me, and go well over the speed limit still
Does it have abs
Shrey Dip Bhandari no it doesn’t.
Doesn’t go 70mph let alone 75
It does in perfect conditions+ id imagine a light rider just based off of other videos i saw someone going like 72 or 73 on it if their speedometer was right
🤩🤩🇮🇹🏍️🇮🇹🤩🤩
❤❤❤🇮🇹❤️❤️❤️
100mph??? 🤥
Its than not then...
What
You mean the Kawasaki Z 125 pto lol.
Fuck yeah