Cleaning After Printing a Linocut
Вставка
- Опубліковано 29 гру 2020
- Saving Excess Printmaking Ink: • Saving Excess Printmak...
Cutting Linoleum: • Cutting Linoleum
Sanding the Linoblock: • Sanding the Linoblock
Lecture: Types of Linoleum: • Lecture: Types of Lino...
Creating Value and Direct-Cut/Direct-Draw Methods on Linoleum: • Creating Value and Dir...
Traditional Drawing Materials for Relief Printmaking: • Traditional Drawing Ma...
Linoleum Image Transfer: Pastel: • Linoleum Image Transfe...
Vector Drawing for a Relief Print: • Vector Drawing for a R...
Linoleum Image Transfer: Graphite with a Spoon and Ink Wash: • Linoleum Image Transfe...
Linoleum Image Transfer: Inkjet Print: • Linoleum Image Transfe...
Linoleum Image Transfer: Graphite with Drawing Tool: • Linoleum Image Transfe...
Linoleum Image Transfer: Transfer Paper: • Linoleum Image Transfe...
Stropping Linocut Tools: • Stropping Linocut Tools
Carving a Linoleum Block: • Carving a Linoleum Block
Printing a Linocut: • Printing a Linocut
Cleaning After Printing a Linocut: • Cleaning After Printin...
I wish, I saw your video just a couple of days before. It was my first experience with linocut and it it was a disaster...your video gave me a hope that the next time won't be a complete mess
perfect, so helpful! thanks a lot!
Thank you!
super!!
Thanks!
So baby oil works with oil based? Nice, thanks
Any recommendations on storage of finished prints, using oil based inks as the medium and acid free paper as the substrate?
I use a flat file. Many people interleave with glassine. You could also build a portfolio and lay it under your bed.
you can wash the brayer with pine sol and water i just have a container with it and reuse when needed to clean and I just Windex the panel I use to put ink on
Do the brayers hold up well over time? I've never tried pine sol. Sounds tidier.
It's been working for me used the same brayer for over a year now and I use a 1/4 tsp or more mix with hot water and wash it off then place it out to air dry or get a cheap paper towel cause they don't have those little fibers on the outside like most uh brand name paper towels and you can just wipe off remaining water so there's no moisture trapped in the rubber or just use scrap paper or a old phone book and wipe away the ink till it's fully off your brayer! ❤@@maddeerpress1196 Hope that helped! 😁
And when cleaning a block best to do sooner than later or it'll require cotton swaps, paper towel, a rag, and pine sol + water. But if you do it right after printing it'll glide off like paint rather than ink sealed to your rubber stamp or lino block 🥰
Is this just for oil-based ink? Or does this work for water-based as well?
Yes. For oil-based. For water-based I would just use a little water with a tiny bit of soap. You can mix oil and water-based inks, just clean them as you would oil-based.
I noticed my tan speedball brayer was shedding the rubber upon wiping with water and a paper towell last night, worried at some point a maybe used alcohol to clean it. Really weird the tan rubber leaves leaches the color out. Might also be a cheap knock off rubber...
That's very strange. Is it old? They don't last forever. I've seen them become sticky, swell on the ends or stretch but not crumble!
baby wipes won’t work?
Baby wipes do work. I live in an arid climate though and they dry out really fast. My way of doing things is absolutely not the only way!
Thank you for talking your way through the demonstration, careful to mention exactly what kinds of cleaning solutions you were using. The most annoying demo method is the musical "enhanced" time-lapse speed demo....... they appear to be entertainment oriented. That's not why we visit these demos, however. Thanks again