One product I have changed my view on since this video is Gamblin's Oil Ground. I've been using it more and more. I was applying too many thick layers in the past, making it overly slick. One or two layers make a fantastic surface for oil painting. I also continue to use the lead grounds, but the oil ground is a strong contender. I greatly prefer them to an acrylic ground. I'm also more prone to gluing canvas (cotton duck or linen) to my panels in case the panel ever becomes damaged. I found out that the Home Depot 2x4 foot sheets of MDF do not contain formaldehyde. Many other MDF and wood products do, so you will want to research each panel independently. My favorite is ABS with canvas. The panel is nearly indestructible, and the canvas will prevent the possibility of plasticizers from affecting the painting. Other plastic panels, like plexiglass, are not recommended because they are brittle, especially in cold temperatures. ABS has a remarkable resilience to cold and heat - it will withstand temperatures ranging from -4 Fahrenheit to 212 degrees Fahrenheit. Actually, acrylic paints are also brittle in cold temperatures, so you don't want to let them get too cold or drop an acrylic painting when it's below freezing - that goes for acrylic gesso on canvas. In fact, you should avoid painting plein air with stretched canvas prepared with acrylic gesso. If you paint plein air (outdoors) in winter temps, use a lead or oil-primed canvas. If all you have is acrylic gesso, make sure it's on a solid panel. Also, I never use rabbit skin glue anymore. Gamblin's PVA size is superior in every way. It is waterproof (not hygroscopic like rabbit skin glue), it remains flexible, and we can paint directly on it if we don't want to use a gesso or primer. So, one or two coats on canvas, and we can paint straight onto the canvas without primer. I prefer a primer over the top since it is less absorbent and the paint glides better, but it's a great option for those avoiding the cost of primers or the solvents that many oil primers contain. It is easier to use than acrylic gesso and is safe for outdoor painting in cold temperatures. One other thing, I mentioned GAC 100 in the video: stay away from all GAC products for oil painting. Golden has changed their recommendation after extensive testing. In every test, the GAC products caused oil paints to crack. Acrylic gesso seems to be fine under oil paintings, but not many of the acrylic mediums.
Thank you so much for this excellent video. These concerns have actually been inhibiting me from painting. I'm just a beginner, but my experience finishing furniture has me concerned about all these types of practicalities. I don't want to get used to painting on something, start selling, and then find out that clients are having troubles down the line with adhesion or whatnot. A question for you: What do you use to glue your canvas to the ABS panel? I would assume that you sand to eliminate tooth, right? I'm using Centurion oil primed linen- would that stick well to the ABS panel? Thank you!
I appreciate the time you've taken not only to post your first video but also to post this additional research. I don't know of any perfect surface for oil painting - as you've said - and health and safety neurotics have made this more difficult, because they've made lead paint very, very difficult to obtain in Europe (drat them). It'll soon be time for me to buy some new panels, so this video has given me a lot to think about.
I am already sensitized to Formaldehyde. As a beginning painter, I started learning an important lesson after applying acrylic gesso to a few items in my kitchen a few weeks ago--having an allergic reaction within minutes. I learned from my experience and my follow-up "research" (that was surprisingly difficult to do!) that the "binder" in acrylic paints (and gesso) outgas-es Formaldehyde as it dries. The video did not mention this is any fashion. Not only is there no warning on the products themselves, there is none even on the "safety data sheets" of the acrylic paint products. The industry is well-familiar with their products, it simply chooses not to share what they know with the consumer. This is common in the food industry too, when it comes to many of the chemicals in our "food" which are there to help preserve it or to provide artificial flavor (such as artificial sweetness). It was evidently common in the tobacco industry too, so all of this shouldn't be too surprising. These big corporations have their own priorities (and consumer safety is probably only rarely first and foremost on their list). I hope this information is helpful. And I hope that it helps, in whatever small way, to create more awareness among the victims--I mean consumers. ; ) Bill Inman, I enjoyed your video, and found it informative! I just wanted to help fill the "gap" I observed (and described above).
@@The_UA-cam_Winner From what I've read, all acrylic mediums outgas formaldehyde as they dry. I'm not saying that this contradicts what you wrote; it's just a general fact that everyone who is using this stuff should be aware of. Cheers!
Thanks for your comment! I did not know that about acrylics and formaldehyde. I've learned that most wood products are steering away from formaldehyde, and all wood products made in the US are formaldehyde-free. I wonder if it is similar within the manufacturing of acrylics? I found a materials sheet that said the only Golden products that contain formaldehyde are a Silkscreen Fabric Gel, GAC 400, and GAC 900, but oil painters shouldn't use them for anything anyway - the GAC products including 100, cause oil paints to crack. Golden used to recommend them under oil paints for increased flexibility, but now they have changed their recommendation. They have done repeated tests that show immediate to long-term cracking.
What a wealth of knowledge in 40 minutes! I was glued to the edge of my seat like I was at a movie theater through this brilliant undertaking of a video because I could see how much your experience has made you articulate on the subject to help guide us on the path to being painters.
Masonite does not typically have formaldehyde in it. The process uses the natural lignin in the wood to bind the fibers together under heat and pressure. Also, the Masonite company no longer makes Masonite boards. Other companies now make this product. One of the most readily available forms of hardboard is a material called Eucaboard. Available at Home Depot. The manufacturer claims on its website that the product contains no formaldehyde. I think the formaldehyde in some boards is a byproduct of the adhesives used to bind those products together. A good reason to stay away from things like MDF and particleboard. I contacted the conservator's dept of the National Gallery of Art in Washington DC. They told me that they feel Masonite style hardboard is a fine support for archival paintings if suitably sealed. The sealing advice is of course is true for any wood-based panel to prevent seepage and staining of the priming layer from tannins in the wood fibers. Sealing all sides and back also helps prevent warping from moisture fluctuation in the environment. As a side note, I personally seal my hardboard with a 50/50 mixture of Galkyd and OMS, as recommended by the folks at Gamblin oil paints. Yes, I know, this process uses toxic mineral spirits, but you have to live dangerously sometimes. Anyway, lead is toxic too, so we all pick and choose what we are comfortable working with. Just work in a space with good ventilation and use a respirator rated for organic solvents. Just wanted to clarify that most Hardboard, using the traditional method of fabrication, contains no formaldehyde.
Great, informative video! I have been so concerned about what would be the most non-toxic oil painting surface to use that will not break down with age and your video helped me to decide on what would work for me.
One thing I have come to observe about worrying over surfaces and archival properties, most of the marketing is meant to get us artists all worked up over it to spend more money. In reality, most of us, we are not the next Monet or Van Gogh or even Andy Warhol. But by chance our art is still out there 100 or 200 years from now, and anyone cares about it, they will find a way to preserve it. So, just paint with and on what you enjoy and can afford. I personally prefer lead primed linen, just for the feel of it. I use RSG because it creates a tight surface, and I prime my canvas myself. It will last a hundred years just fine.
Aluminum oxide creates a good tight structure, so once the aluminum oxide is on the aluminum surface, there isn't much oxygen penetrating to the underlayer of unoxidised aluminum which is probably why the company pre-oxidises them and then seals the panels. Other metals, for example iron oxidise into a porous, open structure like rust (iron oxide). By the way, I love your instructions! 🙂
Thank you! You know a lot more about metal oxidation than me it sounds like. It's tough to learn all the ins and outs of these materials. For many of the art materials people use, there isn't enough information to make confident decisions. I appreciate your willingness to share your knowledge with us.
That’s amazing information. I like the ACM panels but have a few concerns. As you said the corners get damaged easily and there is no info on the longevity of polyester paint on the ACM panel. What about gluing linen on ABS panel instead of ACM? Its cheaper then ACM panels, corners wont get damaged easily as ACM panels and we don’t have to worry about the pealing problem of ABS.
Sorry, this is so late, but YES, I wholeheartedly agree. That is my preference now. ABS is extremely durable in cold and hot temperatures, and the canvas on top will protect against possible plasticizers. That thought you had about polyester paint is a good one. We are learning more and more about products they thought were amazing, like GAC mediums under oil paint, only to find that they are terrible. We are probably better off avoiding new products like that for our oil paintings. The old products work just as well, and at least we know more about the possible downsides because there are hundreds of years (or at least decades) to see the results.
This is a great lesson - You are very well-read and experienced! I'm not asking for a long answer but I just came across an interesting product online, MDF board with a mahogany veneer. You mentioned that genuine mahogany was a good material - in a previous reply. The webshop I found describe their product as 0.6 mm mahogany veneer glued to MDF, I don't know if it would be any good for oil painting. For the foreseeable future I'll stick to heavy watercolor paper and acrylic gesso for my studies, and later try some of the options you have talked about here. Are there any instances of artist using a wood veneer on some other backing material? anyways thanks for the lesson!
I'm sorry I took so long to answer your question, Joachim. You've probably found an answer by now, but in case you haven't, I would avoid veneers. George Hanlon and others caution that veneers have a high possibility of developing cracks or seams. The problem with plywood, in general, is that the layers are contracting at different rates and directions, which causes the other layers to crack. If possible, stick with solid panels historically known to have the strongest resistance to warping and cracking. Or, at least, glue some canvas onto the panel so that if it cracks you can move the canvas to a new panel. Another option for your watercolor paper studies is Gamblin's PVA size - it is waterproof, and you can paint directly on top of it with oil paint without needing gesso.
My friend who has a phd in organic chemistry (so I trust his knowledge) says styrene butadiene is rubber. car tyre component. the info on plastisizers do come out earlier than later is real. Not a good idea for painting. thanks for the wonderful video
You're very welcome! I've studied a lot, but still feel like I know so little. I'm an artist, not a scientist, so figuring some of this out is daunting. I'm grateful artists are sharing their experiences so we can all learn from each other.
Thank you for taking the time to put together this video. I'm noticing when looking at abs sheets the word haircell which somehow means texture would that be the same as sanding?
I use a oil or Acrylics based primer for my MDF from Home Depot called Gripper . I also can purchase here all my MDF in Idaho pure none of boards have chemicals what’s so ever . No problems !!! I can texture my boards, or roll with cabinet roller super smooth . I go out side or the garage and do lots of boards at one time different sizes . My paint is never matte . I love painting on MDF is a lot less expensive than hundreds of dollars. Yes I have a handy hubby that is able to cut them . But my lumber yard that carry’s the MDF will cut them for me if hubby’s fishing .
Thanks for doing this video. I think will stay clear of all mdf and other wood by product manufactured supports now. Even for making linen glued panels. Am sticking with the tried and true stretched linen, rsg, and either titanium or lead oil primer. It may still have issues after many decades but if my work takes on such unexpected notoriety after I am long dead, some future conservation artist can repair it. And most interesting it takes acrylic gesso longer to dry. Good to know. Thanks
Just found this out. Acrylic paints also have formaldehyde. So, probably that and acrylic gesso has it in it as well as any pva glue. Food for thought.
Great comments, thanks. Have you considered Gamblin's PVA size instead of RSG? My research says that Gamblin's PVA size is superior to RSG because it dries waterproof and remains flexible. It does not contain formaldehyde or any other VOCs, and Gamblin says you can paint straight onto it without primer. I prefer lead or oil primer on top of the PVA because the paint glides better, but the PVA is an excellent sealer and easy to work with.
I looked at an MSD of Golden's acrylic products, and only 3 of them contained formaldehyde, none of which we would want to use with oil paints. Their acrylic paints did not contain formaldehyde. Did you see something that suggests differently? Also, Gamblin's PVA does not contain formaldehyde or anything else that would cause VOCs.
What is the problem with cradled plywood panels? I recently bought several sheets of 5x5 Baltic Birch and 4x8 Red Oak, 1/8" thick. With panels that thin, anything larger than 10" to 12" needs to be cradled to not bend. Also, I'm working now with some really cheap plywood and using exterior grade oil based polyurethane to finish off the back, front and sides, which should be an airtight seal. I've done one painting directly on the ployurethane and the paint seems to adhere well. But am also going to try using rabbit skin glue and authentic gesso over the polyurethane. I also have some 1/4" thick panels, but even 18x24 will require cradling. What is your objection to cradling?
Hi Bill, Thank you so much for taking the time for such a thorough and detailed explanation. At this point in my nascent painting career, I very much doubt that my work warrants the expense of the aluminum or abs plastic supports. I had also heard that the reason that old paintings can be removed from their support is that they are on either canvases or panels where the support is first coated with rabbit skin glue, then authentic gesso and/or lead white primer. Apparently, slightly heating the work softens the rabbit skin glue allowing the painting to be peeled off of the support and to then be applied to a new, more enduring support. I'll re-research that and see if I can find out how long before the plywood starts to degrade and add conservation instructions to the certificate of authentication when I start selling work, until I can start getting the type of commission to make the better supports viable for me.
Acrylic take about two full weeks to "stabilize" or go from green, to fully cured, and even after that the acrylic shrinks as it ages... This is the main reason old house paint will crack after about 20 years... yes latex is actually cheaper grade acrylic base with plasticizers...
I have heard great things from several pros about how great polyester is to oil paint on...if u can get some for decent price, I say ur golden! So does Virgil Elliott from "Traditional Oil Painting" book/FB group/forum
Bill, have you tried the Rublev lead oil paste ground? Did you have to thin it? Do you know what the difference is between the Rublev lead oil ground (not paste)? Thanks.
Can I ask how long does it take your paintings to cure in Indiana? Here in maine it’s humid but also cold. My first oil painting is not showing signs of curing after a few days
Can you put lead primer on top of acrylic gesso or would there ever be a situation where that might be preferred? Thanks for the great videos. By the way, OMG there's so much information in this video!!! I've watched it like 5 times. :)
Yes, I highly recommend adding a layer of either lead or oil ground to acrylic gesso for oil painting. You will love the surface. It is so much easier to paint on lead or oil ground than on acrylic gesso because they are less absorbent and the paint glides smoothly. One layer should be all you will need. I'm glad to hear you enjoyed the video!
I had an MDF panel stored in my studio (garage) that in just a few weeks, got covered in a green and black mold coat.. it was truly scary to see it happen as I've just moved to a very humid region. I wonder how should I prime the back of my MDF panel, in order to prevent all my future work from deteriorating? 😪
Wow, that's not something I've encountered. I have MDF panels in my studio that are at least 10 years old and haven't had problems. The ECOS primer I mentioned in the video should help with something like that, but I'm not experienced enough with mold to know for sure. It sounds like the type of mold that comes from excessive moisture, and I'm not sure anything will prevent that entirely except for keeping the panels in a less humid area. Please let us know if you learn anything about the cause and cure.
The "Eucaboard" hardboard Home Depot sells says no formaldehyde added. It is so cheap it is tempting to buy ($8.87 for 4ft by 8ft!) I don't know how it compares to other kinds of MDF or plywood, though.
I’ve been using this for 15 years. Never had any issues with it. I have them cut it into four 2ft by 4ft pieces so it’s easier to transport. Then I cut it into desired panel sizes at home. I think I get around 30 panels out of one sheet, so it’s definitely the most economical solution I’ve found.
Another drawback of MDF is that you must be VERY careful not to breath the dust when cutting it. A lot of people take the saw to it without realizing it’s not like wood dust. It’s extremely dangerous to breathe the fine dust. They won’t cut the big sheets at my local Home Depot because of that.
Hello, excellent video!!!!! But get me out of a DOUBT I don't want to paint on a frame, nor on a board. I want to paint on canvas just like It Comes. What happens if I don't "STRETCH" the canvas to Paint? Is it so NECESSARY to "STRETCH IT"? Is it so IMPORTANT to STRETCH IT? Will it affect you over the years? I want my paintings to last as long as possible in Time!!! I must forcefully STRETCH IT!!!! 😀 Thank you very much 😊😊😊
Hi! You mentioned that there could be a problem with cradled panels. I have used Ampersand cradled panels for years and I have never had a problem with them. I felt they prevented the wood from warping. What type of problems have you seen with them? thank u.
Excellent question Peter. I haven't personally had any trouble with them, maybe because I've only used one of their cradled panels years ago. I added that caution based on reports from conservators about cradled panels in general, not Ampersand in particular. The cradle tends to expand and contact at different rates from the panel and causes issues with the painting. If they are working for you, my personal opinion is to keep moving forward with what you like to use. George Hanlon from Natural Pigments has some great information about it, and Mitra I believe, but it's been a few years since I studied it, so I will need to revisit it to refresh my memory. I study from so many conservator sources, I don't remember off hand the best research on the topic.
I make my own cradled panels: gluing Masonite to 1x2 common pine. It’s worked great for panels under 36” on any side for over 45 years. Acrylic over gesso after sealing panel front and back with PVA. However, most recently a 48x78” panel warped significantly! I back-primed panel and pine with shellac, front of panel with gesso and painted acrylic art over!
Excellent job 👏 well said, and agreed. Fellow oil painter here in Indiana north of Indy. Bout the try some lead ground from Rublev, got a big roll of oil primed linen but I keep hearing about how much better quality lead primer is. I have a bunch of aluminium as well, but its not ACM. its just sheet aluminium(I'm a tig welder) u think oil or lead primer, or linen, would mount well on regular aluminum sheets? Thanks bud for all the info!
Sorry for the delayed answer. As far as I have read, as long as you seal the aluminum, it will work well. Lead has advantages over oil ground, but oil ground is still an excellent primer for oil painting. Supposedly, lead particles will migrate from the primer into the paint layers over time, making them more flexible and stronger. If you like the oil ground for painting on, I wouldn't worry about covering it with lead - it's still a strong primer for oil paints. Save the lead for those times when you get an acrylic primed canvas or panel. But, if you paint on the lead and find you like it more, then cover all of your surfaces with it. It's a toss-up for me - they are both wonderful surfaces to paint on. What I changed with the oil ground is applying it more thinly and using only one or two coats. That seems to keep it from getting overly slick.
@masteroilpainting thanks lol ya I've dialed in what I like by now. 1 thin coat of lead primer rolled on with roller. Just enough to make the oil primed slickness have a slight tooth which, for whatever reason, I prefer. Thanks for the response! Lead primed linen ACM panels have been my favorite/cost effective way to have fun and make quality products. Good luck@
Thankyou so much for such useful information. I am looking for a surface for commission purpose and need to post it from Australia to India (via a friend) . I really like the idea of painting on Aluminium panel. However how do we frame it? Can it be done after I have painted over it? Coz I would prefer posting it without the frame to avoid the added weight to the parcel.
Talens and Liquitex Pro make really good gesso. I discovered oil ground awhile back and absolutely love the smoother texture, not as absorbent as gesso.. also I bought a bag of fredrix marble dust from Jerry's Artarama for $10 to add to the primers to make them adhere better to the canvas/panel, and add little more tooth to the primer. Anyway, good luck and happy painting!
OK so no turpentine or Odorless turps , how do you clean your brushes then????? That’s all I use it for . I use Linseed oil too thin my paint down whenever I need it .
With oil paint you don't have to prime it - oil paint can be used directly on the wood. You might want to seal the wood though to protect it from moisture that might affect it over time. Oil paints rot plants like linen and cotton, but not wood - oil is used to condition wood. I'm no longer a fan of painting directly onto a panel though, I am now adhering canvas to panels so that if the panel is damaged the painting can be removed and attached to a different panel.
😂 Too much information to fast. I'll have to watch a few times more my brother. Thank you for your time & resurch. I'm just being my journey but in a short time (from last November) I'm learning a lot from vids like yours Alhumdulila. 🤔✌️😆🥴🤣💥🌞 oh yes we use oils and now inks acrylics & oils on top.
Hola , Excelente Vídeo!!!!! Pero Sácame de una DUDA No quiero pintar sobre Bastidor, Ni sobre tabla. Quiero pintar sobre lienzo así como Viene. ¿Qué pasa si no "ESTIRO" el lienzo para Pintar? Es tan NECESARIO "ESTIRARLO"? Es tan IMPORTANTE ESTIRARLO? Le afectará con el paso de los Años??? Quiero que mis pinturas perduren lo más que pueda en el Tiempo!!! Debo forzosamente ESTIRARLO!!!! 😀 Muchísimas Gracias 😊😊😊
Puedes pintar sobre lienzo como viene, pero luego que se seque la pintura y quieras estirarlo en bastidor corres el riesgo que la pintura se cuartee o agriete. La solución sería pegar el lienzo a un panel (si es pequeño) o exhibir la pintura con argollas como una tapete de pared.
masonite does not have formaldehyde, that is medium density fibreboard which is usually lighter color, masonite is glued thanks to its own lignin that with steam and high pressure becomes liquid flows and glues things together, lignin does degrade more than phenol formaldehyde (the one with urea in the place of phenol is the water soluble crap) and can be eaten by termites, anyways we are talking of years of bad conservation
You say that hardboard will leak out oils and draw in moisture so it is not good to use for a painting. So priming these boards with GAC 100 or good quality Gesso, before you paint on it, doesn't prevent this?
Hi! Not all hardboards even contain oils. As for GAC 100, it can be used to create a barrier layer between the wood and an acrylic primer to prevent the lignin and tannin from migrating into the ground, but won't be an effective, long-term moisture blocker. The easiest way to avoid issues is to keep the work in a consistent environment. If you still have concerns, pigmented shellac (on the side edges and back) can block moisture.
Viewers should know that the most dangerous thing to do with a lead primed surface is to sand it. Lead is most hazardous when airborne. If left intact, however, it presents a little danger.
Oh please. It's only dangerous if you sand it or eat it. Any artist that is serious enough to use lead white ground will absolutely know the risks. I guarantee you that human beings' daily habits are doing far more damage to the environment than artists' use of lead white.
No doubt. I love the 'indestructible' nature of ABS, but the overabundance of plastic in the world does keep me searching for better alternatives. Lately, I've been attaching canvas to ACM (aluminum) panels. That way if the panel is dropped I can transfer the painting to another panel. Although, ACM still has a plastic middle, so it doesn't reduce the use of plastic. I wish there was a perfect art panel or substrate, but alas, they all have fatal flaws.
One product I have changed my view on since this video is Gamblin's Oil Ground. I've been using it more and more. I was applying too many thick layers in the past, making it overly slick. One or two layers make a fantastic surface for oil painting. I also continue to use the lead grounds, but the oil ground is a strong contender. I greatly prefer them to an acrylic ground. I'm also more prone to gluing canvas (cotton duck or linen) to my panels in case the panel ever becomes damaged. I found out that the Home Depot 2x4 foot sheets of MDF do not contain formaldehyde. Many other MDF and wood products do, so you will want to research each panel independently. My favorite is ABS with canvas. The panel is nearly indestructible, and the canvas will prevent the possibility of plasticizers from affecting the painting. Other plastic panels, like plexiglass, are not recommended because they are brittle, especially in cold temperatures. ABS has a remarkable resilience to cold and heat - it will withstand temperatures ranging from -4 Fahrenheit to 212 degrees Fahrenheit. Actually, acrylic paints are also brittle in cold temperatures, so you don't want to let them get too cold or drop an acrylic painting when it's below freezing - that goes for acrylic gesso on canvas. In fact, you should avoid painting plein air with stretched canvas prepared with acrylic gesso. If you paint plein air (outdoors) in winter temps, use a lead or oil-primed canvas. If all you have is acrylic gesso, make sure it's on a solid panel. Also, I never use rabbit skin glue anymore. Gamblin's PVA size is superior in every way. It is waterproof (not hygroscopic like rabbit skin glue), it remains flexible, and we can paint directly on it if we don't want to use a gesso or primer. So, one or two coats on canvas, and we can paint straight onto the canvas without primer. I prefer a primer over the top since it is less absorbent and the paint glides better, but it's a great option for those avoiding the cost of primers or the solvents that many oil primers contain. It is easier to use than acrylic gesso and is safe for outdoor painting in cold temperatures. One other thing, I mentioned GAC 100 in the video: stay away from all GAC products for oil painting. Golden has changed their recommendation after extensive testing. In every test, the GAC products caused oil paints to crack. Acrylic gesso seems to be fine under oil paintings, but not many of the acrylic mediums.
Thank you so much for this excellent video. These concerns have actually been inhibiting me from painting. I'm just a beginner, but my experience finishing furniture has me concerned about all these types of practicalities. I don't want to get used to painting on something, start selling, and then find out that clients are having troubles down the line with adhesion or whatnot. A question for you: What do you use to glue your canvas to the ABS panel? I would assume that you sand to eliminate tooth, right? I'm using Centurion oil primed linen- would that stick well to the ABS panel? Thank you!
I appreciate the time you've taken not only to post your first video but also to post this additional research. I don't know of any perfect surface for oil painting - as you've said - and health and safety neurotics have made this more difficult, because they've made lead paint very, very difficult to obtain in Europe (drat them). It'll soon be time for me to buy some new panels, so this video has given me a lot to think about.
Wow thank you so much for this incredible addition to what is already an exceptional presentation
The best video about painting surface on UA-cam
I am already sensitized to Formaldehyde. As a beginning painter, I started learning an important lesson after applying acrylic gesso to a few items in my kitchen a few weeks ago--having an allergic reaction within minutes. I learned from my experience and my follow-up "research" (that was surprisingly difficult to do!) that the "binder" in acrylic paints (and gesso) outgas-es Formaldehyde as it dries. The video did not mention this is any fashion. Not only is there no warning on the products themselves, there is none even on the "safety data sheets" of the acrylic paint products. The industry is well-familiar with their products, it simply chooses not to share what they know with the consumer. This is common in the food industry too, when it comes to many of the chemicals in our "food" which are there to help preserve it or to provide artificial flavor (such as artificial sweetness). It was evidently common in the tobacco industry too, so all of this shouldn't be too surprising. These big corporations have their own priorities (and consumer safety is probably only rarely first and foremost on their list). I hope this information is helpful. And I hope that it helps, in whatever small way, to create more awareness among the victims--I mean consumers. ; ) Bill Inman, I enjoyed your video, and found it informative! I just wanted to help fill the "gap" I observed (and described above).
liquitex gesso’s have no formadehyde. cheaper gesso’s and goldens gesso do have them.
that should solve your problem
@@The_UA-cam_Winner From what I've read, all acrylic mediums outgas formaldehyde as they dry. I'm not saying that this contradicts what you wrote; it's just a general fact that everyone who is using this stuff should be aware of. Cheers!
Thanks for your comment! I did not know that about acrylics and formaldehyde. I've learned that most wood products are steering away from formaldehyde, and all wood products made in the US are formaldehyde-free. I wonder if it is similar within the manufacturing of acrylics? I found a materials sheet that said the only Golden products that contain formaldehyde are a Silkscreen Fabric Gel, GAC 400, and GAC 900, but oil painters shouldn't use them for anything anyway - the GAC products including 100, cause oil paints to crack. Golden used to recommend them under oil paints for increased flexibility, but now they have changed their recommendation. They have done repeated tests that show immediate to long-term cracking.
What a wealth of knowledge in 40 minutes!
I was glued to the edge of my seat like I was at a movie theater through this brilliant undertaking of a video because I could see how much your experience has made you articulate on the subject to help guide us on the path to being painters.
The older I get the more brittle I become ...great easy flowing chat with tons of useful info...Thanks
Thank you for being so generous with your knowledge and experience. It is extremely helpful.
I'm glad to hear you enjoyed it!
Thank you for doing the research and making it clear for us. I’ve been so confused about this stuff. I can start painting now 🙏😁
You're welcome. I'm glad to hear it was helpful!
Masonite does not typically have formaldehyde in it. The process uses the natural lignin in the wood to bind the fibers together under heat and pressure. Also, the Masonite company no longer makes Masonite boards. Other companies now make this product. One of the most readily available forms of hardboard is a material called Eucaboard. Available at Home Depot. The manufacturer claims on its website that the product contains no formaldehyde. I think the formaldehyde in some boards is a byproduct of the adhesives used to bind those products together. A good reason to stay away from things like MDF and particleboard.
I contacted the conservator's dept of the National Gallery of Art in Washington DC. They told me that they feel Masonite style hardboard is a fine support for archival paintings if suitably sealed. The sealing advice is of course is true for any wood-based panel to prevent seepage and staining of the priming layer from tannins in the wood fibers. Sealing all sides and back also helps prevent warping from moisture fluctuation in the environment.
As a side note, I personally seal my hardboard with a 50/50 mixture of Galkyd and OMS, as recommended by the folks at Gamblin oil paints. Yes, I know, this process uses toxic mineral spirits, but you have to live dangerously sometimes. Anyway, lead is toxic too, so we all pick and choose what we are comfortable working with. Just work in a space with good ventilation and use a respirator rated for organic solvents.
Just wanted to clarify that most Hardboard, using the traditional method of fabrication, contains no formaldehyde.
Great advice. So good to reassure new painters to get out there and paint. Thank you. I have subscribed.
I did my 1/4" marine plywood plus canvas cloth panel also with 50%flat and 50% semi-gloss latex
paints here in the Philippines
Great, informative video! I have been so concerned about what would be the most non-toxic oil painting surface to use that will not break down with age and your video helped me to decide on what would work for me.
Great to hear! I will do more videos now than I have for the past few years and update with any new info I learn.
One thing I have come to observe about worrying over surfaces and archival properties, most of the marketing is meant to get us artists all worked up over it to spend more money. In reality, most of us, we are not the next Monet or Van Gogh or even Andy Warhol. But by chance our art is still out there 100 or 200 years from now, and anyone cares about it, they will find a way to preserve it. So, just paint with and on what you enjoy and can afford. I personally prefer lead primed linen, just for the feel of it. I use RSG because it creates a tight surface, and I prime my canvas myself. It will last a hundred years just fine.
Great advice Ann! I agree wholeheartedly.
It's a great opportunity for me knowing all of those you shared Sir.. I'll be watching it often to remember everything.. So grateful..
Great video very informative. I am restorer too. This has been very helpful
I’ve been doing a lot of looking around. This is a very solid overview. Thanks.
Great to hear, thank you!
Very thorough with your information, thank you!
Aluminum oxide creates a good tight structure, so once the aluminum oxide is on the aluminum surface, there isn't much oxygen penetrating to the underlayer of unoxidised aluminum which is probably why the company pre-oxidises them and then seals the panels. Other metals, for example iron oxidise into a porous, open structure like rust (iron oxide). By the way, I love your instructions! 🙂
Thank you! You know a lot more about metal oxidation than me it sounds like. It's tough to learn all the ins and outs of these materials. For many of the art materials people use, there isn't enough information to make confident decisions. I appreciate your willingness to share your knowledge with us.
That’s amazing information. I like the ACM panels but have a few concerns. As you said the corners get damaged easily and there is no info on the longevity of polyester paint on the ACM panel.
What about gluing linen on ABS panel instead of ACM? Its cheaper then ACM panels, corners wont get damaged easily as ACM panels and we don’t have to worry about the pealing problem of ABS.
Sorry, this is so late, but YES, I wholeheartedly agree. That is my preference now. ABS is extremely durable in cold and hot temperatures, and the canvas on top will protect against possible plasticizers. That thought you had about polyester paint is a good one. We are learning more and more about products they thought were amazing, like GAC mediums under oil paint, only to find that they are terrible. We are probably better off avoiding new products like that for our oil paintings. The old products work just as well, and at least we know more about the possible downsides because there are hundreds of years (or at least decades) to see the results.
Thanks for this video. It is very educational. You are gold!
What linen panels would you recommend? My small home studio doesn't have a lot of room to store mounted canvases...
So much valuable technical information! Thank you
As an architectual graduate I find this fascinating. Look into low VOC , green star rated materials. Should be a good starting point .
This is a great lesson - You are very well-read and experienced! I'm not asking for a long answer but I just came across an interesting product online, MDF board with a mahogany veneer. You mentioned that genuine mahogany was a good material - in a previous reply. The webshop I found describe their product as 0.6 mm mahogany veneer glued to MDF, I don't know if it would be any good for oil painting. For the foreseeable future I'll stick to heavy watercolor paper and acrylic gesso for my studies, and later try some of the options you have talked about here. Are there any instances of artist using a wood veneer on some other backing material? anyways thanks for the lesson!
I'm sorry I took so long to answer your question, Joachim. You've probably found an answer by now, but in case you haven't, I would avoid veneers. George Hanlon and others caution that veneers have a high possibility of developing cracks or seams. The problem with plywood, in general, is that the layers are contracting at different rates and directions, which causes the other layers to crack. If possible, stick with solid panels historically known to have the strongest resistance to warping and cracking. Or, at least, glue some canvas onto the panel so that if it cracks you can move the canvas to a new panel. Another option for your watercolor paper studies is Gamblin's PVA size - it is waterproof, and you can paint directly on top of it with oil paint without needing gesso.
My friend who has a phd in organic chemistry (so I trust his knowledge) says styrene butadiene is rubber. car tyre component. the info on plastisizers do come out earlier than later is real. Not a good idea for painting. thanks for the wonderful video
Thank you so much for sharing your extended knowledge and thank you for encouraging all of us!
You're very welcome! I've studied a lot, but still feel like I know so little. I'm an artist, not a scientist, so figuring some of this out is daunting. I'm grateful artists are sharing their experiences so we can all learn from each other.
Thank you for taking the time to put together this video. I'm noticing when looking at abs sheets the word haircell which somehow means texture would that be the same as sanding?
I use a oil or Acrylics based primer for my MDF from Home Depot called Gripper . I also can purchase here all my MDF in Idaho pure none of boards have chemicals what’s so ever .
No problems !!! I can texture my boards, or roll with cabinet roller super smooth . I go out side or the garage and do lots of boards at one time different sizes . My paint is never matte . I love painting on MDF is a lot less expensive than hundreds of dollars. Yes I have a handy hubby that is able to cut them .
But my lumber yard that carry’s the MDF will cut them for me if hubby’s fishing .
Thank you SO much for all this great information!
Super information. Thanks for sharing your knowledge.
Wow! Thank you for this great info, you answered alot of my questions!
Thanks for doing this video. I think will stay clear of all mdf and other wood by product manufactured supports now. Even for making linen glued panels. Am sticking with the tried and true stretched linen, rsg, and either titanium or lead oil primer. It may still have issues after many decades but if my work takes on such unexpected notoriety after I am long dead, some future conservation artist can repair it. And most interesting it takes acrylic gesso longer to dry. Good to know. Thanks
Just found this out. Acrylic paints also have formaldehyde. So, probably that and acrylic gesso has it in it as well as any pva glue. Food for thought.
Great comments, thanks. Have you considered Gamblin's PVA size instead of RSG? My research says that Gamblin's PVA size is superior to RSG because it dries waterproof and remains flexible. It does not contain formaldehyde or any other VOCs, and Gamblin says you can paint straight onto it without primer. I prefer lead or oil primer on top of the PVA because the paint glides better, but the PVA is an excellent sealer and easy to work with.
I looked at an MSD of Golden's acrylic products, and only 3 of them contained formaldehyde, none of which we would want to use with oil paints. Their acrylic paints did not contain formaldehyde. Did you see something that suggests differently? Also, Gamblin's PVA does not contain formaldehyde or anything else that would cause VOCs.
What sorts of problems can cradling cause for boards? (Thanks for this extremely informative video!)
What is the problem with cradled plywood panels? I recently bought several sheets of 5x5 Baltic Birch and 4x8 Red Oak, 1/8" thick. With panels that thin, anything larger than 10" to 12" needs to be cradled to not bend. Also, I'm working now with some really cheap plywood and using exterior grade oil based polyurethane to finish off the back, front and sides, which should be an airtight seal. I've done one painting directly on the ployurethane and the paint seems to adhere well. But am also going to try using rabbit skin glue and authentic gesso over the polyurethane. I also have some 1/4" thick panels, but even 18x24 will require cradling. What is your objection to cradling?
Hi Bill, Thank you so much for taking the time for such a thorough and detailed explanation. At this point in my
nascent painting career, I very much doubt that my work warrants the expense of the aluminum or abs plastic supports.
I had also heard that the reason that old paintings can be removed from their support is that they are on either canvases
or panels where the support is first coated with rabbit skin glue, then authentic gesso and/or lead white primer.
Apparently, slightly heating the work softens the rabbit skin glue allowing the painting to be peeled off of the support
and to then be applied to a new, more enduring support. I'll re-research that and see if I can find out how long before the
plywood starts to degrade and add conservation instructions to the certificate of authentication when I start selling work,
until I can start getting the type of commission to make the better supports viable for me.
Acrylic take about two full weeks to "stabilize" or go from green, to fully cured, and even after that the acrylic shrinks as it ages... This is the main reason old house paint will crack after about 20 years... yes latex is actually cheaper grade acrylic base with plasticizers...
Thank you for sharing your experience and advice on using these supports. Have you had any experience using synthetic canvas, such as polyester?
I have heard great things from several pros about how great polyester is to oil paint on...if u can get some for decent price, I say ur golden! So does Virgil Elliott from "Traditional Oil Painting" book/FB group/forum
Bill, have you tried the Rublev lead oil paste ground? Did you have to thin it? Do you know what the difference is between the Rublev lead oil ground (not paste)? Thanks.
MUCHÍSIMAS GRACIAS por Responderme!!!!! Lo aprecio Mucho!!!! Muchas Gracias!!!😀😀😀
Masonite is sold with and without treatment, oil treated to prevent water damage.
And there is a wide range of hardboard products, from those without any residual oils to those with an oil-rich surface.
Google talks about abs panels and said paint will peel off without preparing the surface
Do you use the lead primer straight out of the can or do you thin it down and what would you thin it with?
I love the Grumbacher Gesso
Can I ask how long does it take your paintings to cure in Indiana? Here in maine it’s humid but also cold. My first oil painting is not showing signs of curing after a few days
This is amazing information! Thank you.
Great video - learned a lot
Can you put lead primer on top of acrylic gesso or would there ever be a situation where that might be preferred? Thanks for the great videos. By the way, OMG there's so much information in this video!!! I've watched it like 5 times. :)
Yes, I highly recommend adding a layer of either lead or oil ground to acrylic gesso for oil painting. You will love the surface. It is so much easier to paint on lead or oil ground than on acrylic gesso because they are less absorbent and the paint glides smoothly. One layer should be all you will need. I'm glad to hear you enjoyed the video!
Exactly the video I needed! Thank you!
Excellent info! Thanks
I had an MDF panel stored in my studio (garage) that in just a few weeks, got covered in a green and black mold coat.. it was truly scary to see it happen as I've just moved to a very humid region. I wonder how should I prime the back of my MDF panel, in order to prevent all my future work from deteriorating? 😪
Wow, that's not something I've encountered. I have MDF panels in my studio that are at least 10 years old and haven't had problems. The ECOS primer I mentioned in the video should help with something like that, but I'm not experienced enough with mold to know for sure. It sounds like the type of mold that comes from excessive moisture, and I'm not sure anything will prevent that entirely except for keeping the panels in a less humid area. Please let us know if you learn anything about the cause and cure.
The "Eucaboard" hardboard Home Depot sells says no formaldehyde added. It is so cheap it is tempting to buy ($8.87 for 4ft by 8ft!) I don't know how it compares to other kinds of MDF or plywood, though.
I’ve been using this for 15 years. Never had any issues with it. I have them cut it into four 2ft by 4ft pieces so it’s easier to transport. Then I cut it into desired panel sizes at home. I think I get around 30 panels out of one sheet, so it’s definitely the most economical solution I’ve found.
@@arachosia Great! Thanks for the feedback. I may try it. I was planning on getting into painting after Christmas, after I get more supplies.
Another drawback of MDF is that you must be VERY careful not to breath the dust when cutting it. A lot of people take the saw to it without realizing it’s not like wood dust. It’s extremely dangerous to breathe the fine dust. They won’t cut the big sheets at my local Home Depot because of that.
That's a great point, thank you for cautioning us about that!
What do you think of Arches oil paper for oil painting?
Hello, excellent video!!!!! But get me out of a DOUBT I don't want to paint on a frame, nor on a board. I want to paint on canvas just like It Comes. What happens if I don't "STRETCH" the canvas to Paint? Is it so NECESSARY to "STRETCH IT"? Is it so IMPORTANT to STRETCH IT? Will it affect you over the years? I want my paintings to last as long as possible in Time!!! I must forcefully STRETCH IT!!!! 😀 Thank you very much 😊😊😊
Thank you so mch for sharing! There is moisture resistant MDF, would that be a better choice?
THANK YOU SO MUCH FOR THIS!
Thanks for this! Much appreciated.
Hi! You mentioned that there could be a problem with cradled panels. I have used Ampersand cradled panels for years and I have never had a problem with them. I felt they prevented the wood from warping. What type of problems have you seen with them? thank u.
Excellent question Peter. I haven't personally had any trouble with them, maybe because I've only used one of their cradled panels years ago. I added that caution based on reports from conservators about cradled panels in general, not Ampersand in particular. The cradle tends to expand and contact at different rates from the panel and causes issues with the painting. If they are working for you, my personal opinion is to keep moving forward with what you like to use. George Hanlon from Natural Pigments has some great information about it, and Mitra I believe, but it's been a few years since I studied it, so I will need to revisit it to refresh my memory. I study from so many conservator sources, I don't remember off hand the best research on the topic.
I make my own cradled panels: gluing Masonite to 1x2 common pine. It’s worked great for panels under 36” on any side for over 45 years. Acrylic over gesso after sealing panel front and back with PVA. However, most recently a 48x78” panel warped significantly! I back-primed panel and pine with shellac, front of panel with gesso and painted acrylic art over!
you should debate Stephen Bauman about the plastic canvas I'd LOOOOOVE to learn from that debate!
Hahaha yess! :) Stefan would make me laugh, with his dramatic passionate stance. And the best vests lol
Great information!! Txxx
Excellent job 👏 well said, and agreed. Fellow oil painter here in Indiana north of Indy. Bout the try some lead ground from Rublev, got a big roll of oil primed linen but I keep hearing about how much better quality lead primer is. I have a bunch of aluminium as well, but its not ACM. its just sheet aluminium(I'm a tig welder) u think oil or lead primer, or linen, would mount well on regular aluminum sheets? Thanks bud for all the info!
Sorry for the delayed answer. As far as I have read, as long as you seal the aluminum, it will work well. Lead has advantages over oil ground, but oil ground is still an excellent primer for oil painting. Supposedly, lead particles will migrate from the primer into the paint layers over time, making them more flexible and stronger. If you like the oil ground for painting on, I wouldn't worry about covering it with lead - it's still a strong primer for oil paints. Save the lead for those times when you get an acrylic primed canvas or panel. But, if you paint on the lead and find you like it more, then cover all of your surfaces with it. It's a toss-up for me - they are both wonderful surfaces to paint on. What I changed with the oil ground is applying it more thinly and using only one or two coats. That seems to keep it from getting overly slick.
@masteroilpainting thanks lol ya I've dialed in what I like by now. 1 thin coat of lead primer rolled on with roller. Just enough to make the oil primed slickness have a slight tooth which, for whatever reason, I prefer. Thanks for the response! Lead primed linen ACM panels have been my favorite/cost effective way to have fun and make quality products. Good luck@
Thankyou so much for such useful information. I am looking for a surface for commission purpose and need to post it from Australia to India (via a friend) . I really like the idea of painting on Aluminium panel. However how do we frame it? Can it be done after I have painted over it? Coz I would prefer posting it without the frame to avoid the added weight to the parcel.
How would you hang the ACM panel on a gallery wall? Would you have to frame them?
Nice followup.
No solvent no turpentine , but what we wash out brush with ?
Do you recommend 'Talens' for the acrylic gesso? :)
Talens and Liquitex Pro make really good gesso. I discovered oil ground awhile back and absolutely love the smoother texture, not as absorbent as gesso.. also I bought a bag of fredrix marble dust from Jerry's Artarama for $10 to add to the primers to make them adhere better to the canvas/panel, and add little more tooth to the primer. Anyway, good luck and happy painting!
This was great. Thx
Excellent!
I’ve been buying oil prime linen boards, do I need to still gesso?
No! You can't put gesso over oil primed linen.
@@Tonal236 lol 😆 hopefully u caught him in time, before he ruins his perfectly good linen panel!
I'm using arteza canvas and what oil paint gloss.? Primer
OK so no turpentine or Odorless turps , how do you clean your brushes then????? That’s all I use it for .
I use Linseed oil too thin my paint down whenever I need it .
Thanks for the great info!
Glad it was helpful!
the thickness of abs panel is 3 mm ?
What about solid wood. What kind of primer can be used on solid wood
With oil paint you don't have to prime it - oil paint can be used directly on the wood. You might want to seal the wood though to protect it from moisture that might affect it over time. Oil paints rot plants like linen and cotton, but not wood - oil is used to condition wood. I'm no longer a fan of painting directly onto a panel though, I am now adhering canvas to panels so that if the panel is damaged the painting can be removed and attached to a different panel.
So if you're an oil painter, how do you avoid turps? Cleaning brushes etc
Walnut oil for cleaning up brushes or white out the paint and use Murphys oil soap
Super informative and helpful. It is quite long and it would be good to put some topic time stamps
That's a great idea. Thank you for the suggestion!
Where in Indiana do you get your ABS plastic, and what exactly do you ask for? (I'm in Indiana too)
I get mine from Regal Plastics - regalplastic.com, 8227 Northwest Boulevard, Suite 240, Indianapolis, IN 46278
😂 Too much information to fast. I'll have to watch a few times more my brother. Thank you for your time & resurch. I'm just being my journey but in a short time (from last November) I'm learning a lot from vids like yours Alhumdulila. 🤔✌️😆🥴🤣💥🌞 oh yes we use oils and now inks acrylics & oils on top.
What about 'Gatorboard' ?
Hola , Excelente Vídeo!!!!! Pero Sácame de una DUDA No quiero pintar sobre Bastidor, Ni sobre tabla. Quiero pintar sobre lienzo así como Viene. ¿Qué pasa si no "ESTIRO" el lienzo para Pintar? Es tan NECESARIO "ESTIRARLO"? Es tan IMPORTANTE ESTIRARLO? Le afectará con el paso de los Años??? Quiero que mis pinturas perduren lo más que pueda en el Tiempo!!! Debo forzosamente ESTIRARLO!!!! 😀 Muchísimas Gracias 😊😊😊
Puedes pintar sobre lienzo como viene, pero luego que se seque la pintura y quieras estirarlo en bastidor corres el riesgo que la pintura se cuartee o agriete. La solución sería pegar el lienzo a un panel (si es pequeño) o exhibir la pintura con argollas como una tapete de pared.
masonite does not have formaldehyde, that is medium density fibreboard which is usually lighter color, masonite is glued thanks to its own lignin that with steam and high pressure becomes liquid flows and glues things together, lignin does degrade more than phenol formaldehyde (the one with urea in the place of phenol is the water soluble crap) and can be eaten by termites, anyways we are talking of years of bad conservation
Brilliant info 😊😊😊
We live in Rochester IN!!!!!
You say that hardboard will leak out oils and draw in moisture so it is not good to use for a painting. So priming these boards with GAC 100 or good quality Gesso, before you paint on it, doesn't prevent this?
Wondering about GAC 100 and then adding oil ground after it dries
Hi! Not all hardboards even contain oils. As for GAC 100, it can be used to create a barrier layer between the wood and an acrylic primer to prevent the lignin and tannin from migrating into the ground, but won't be an effective, long-term moisture blocker. The easiest way to avoid issues is to keep the work in a consistent environment. If you still have concerns, pigmented shellac (on the side edges and back) can block moisture.
WOW! THANK YOU !!!!
Thank You 🖌️
Viewers should know that the most dangerous thing to do with a lead primed surface is to sand it. Lead is most hazardous when airborne. If left intact, however, it presents a little danger.
With all due respect, you shouldn't be claiming that lead ground is non toxic. It's incredibly toxic and banned in Europe for this reason.
Oh please. It's only dangerous if you sand it or eat it. Any artist that is serious enough to use lead white ground will absolutely know the risks. I guarantee you that human beings' daily habits are doing far more damage to the environment than artists' use of lead white.
what thickness ABS do you use?
@@masteroilpainting thanks Bill ill go for a sheet of 6mm (1/4 inch)
I think less plastic is better were we dont need them.
No doubt. I love the 'indestructible' nature of ABS, but the overabundance of plastic in the world does keep me searching for better alternatives. Lately, I've been attaching canvas to ACM (aluminum) panels. That way if the panel is dropped I can transfer the painting to another panel. Although, ACM still has a plastic middle, so it doesn't reduce the use of plastic. I wish there was a perfect art panel or substrate, but alas, they all have fatal flaws.
Wait cradling is bad? I thought it was important to cradle boards. Explain yourself! 😁
nothing against china? mmm