Hi there I've had a bike like this for 2 years now its a roder brand and won't turn on. I've never messed around with it much only a wire that smashed and put it pack and used electric tape to hold it in place as properly as I can. I've tried averting I know to do. Ant advice?
I unlocked mine,I put it back to stock the battery went down so fast even in mode one...Between the speed and range.I liked the range .....Your only getting 4 to 5 mph faster, it`s not worth it ...........And I do carry 2 battery`s and pull a Burley Trailer some time`s when I`m going camping on it and fishing........I LOVE THIS THING...........Old M1P Chris NC..............Have A Good
@@dennis8019 It`s kinda sloppy .I still have to stop and switch plug`s I haven`t figured out how to run them parallel......They do fit on there side`s in the battery hole.I have braced them tying to think of some way to build a box over them that look`s half way good.......Let me no what you think.. E-Bike Chris...............
I have a question. My e chopper mangosteen m1 has a 2pin accu connection. I see on your's that you have a 3pin connection.. Is there a way that i can change my connection port or use an cable that switch the 2pin to 3pin?
Mine has a three pin connector, but the only uses two of the pins the third one is just for location. You could change this to any connected that you like.
I have one more question :) I have a 60v 20ah battery. The fuse that i have inside is an 60a .. can i replace this with a 40a fuse? I saw a comment in the chat saying that he said that a 40a fuse is needed. I just want to be sure if that means from my battery too.
@@HaNsSiEHans I would stick with the 60 amp still in there. I did have a problem with mine on a very cold day going up a steep hill. It pulled a lot more current and blew the original fuse.
Thanks again :) i have set a new 60a fuse in it. But now i have a new question of which i hope you can help me. My battery indicator gives 3 bars left but it shuts down all the sudden and won't turn on anymore.. What could be the problem? Is this telling that i need to buy a new battery?
Hey man i have the m2 and its been sitting for a while today i try to use it but its dead and when i plug the charge in the light is green when i plug the battery like id its on full, but when i plug the bike to the battery it wont turn on.
I bought one of these a couple days ago to get to and from work ..... All of a sudden it just cut out like an EMP hit me is this my problem also and how do I get that connector piece
@@shunmoore2449 mine came with a CE certificate and commercial invoice and all I had to do was show proof of insurance as the tax is zero rated I didn’t have to add any money just pay £150 for first registration fee
why bother with the black connector. just wire it with the connectors that Kev gave you and that would have been job done... (obviously you would have to change the connector on the charger as well, but that wouldn't take long...)
Yes 100% if I have any more problems with it I will. The only reason I didn’t as I didn’t have any more connectors. As I would have to change the connector on the bike and also on the battery charger system. however the black connector has lasted for three years up till now.
i have a question i have the same scooter but it started cutting power while i was driving like it goes and stops and i’ve notice a exclamation mark on the bottle right corner of where the miles are display any info on that @swampthing4x4
glad you got it sorted, let me know if you need another connector!
I will see how it goes, if it plays up more I may do👍
nice job. an interesting problem. Quality should always be preferred. Thanks.
Looking forward to seeing the 2 monster trucks in August amazing garige you have there Tony
Thank you, I love it
Hi there I've had a bike like this for 2 years now its a roder brand and won't turn on. I've never messed around with it much only a wire that smashed and put it pack and used electric tape to hold it in place as properly as I can. I've tried averting I know to do. Ant advice?
It’s hard to diagnose it without seeing it
I unlocked mine,I put it back to stock the battery went down so fast even in mode one...Between the speed and range.I liked the range .....Your only getting 4 to 5 mph faster, it`s not worth it ...........And I do carry 2 battery`s and pull a Burley Trailer some time`s when I`m going camping on it and fishing........I LOVE THIS THING...........Old M1P Chris NC..............Have A Good
Chris
can u share how u put two batteries in that chopper?
@@dennis8019 It`s kinda sloppy .I still have to stop and switch plug`s I haven`t figured out how to run them parallel......They do fit on there side`s in the battery hole.I have braced them tying to think of some way to build a box over them that look`s half way good.......Let me no what you think.. E-Bike Chris...............
I have a question.
My e chopper mangosteen m1 has a 2pin accu connection.
I see on your's that you have a 3pin connection..
Is there a way that i can change my connection port or use an cable that switch the 2pin to 3pin?
Mine has a three pin connector, but the only uses two of the pins the third one is just for location. You could change this to any connected that you like.
@swampthing4x4 oh, that's absolutely great :) Thank you very much for answering!
This is very helpful..
I have one more question :)
I have a 60v 20ah battery.
The fuse that i have inside is an 60a .. can i replace this with a 40a fuse? I saw a comment in the chat saying that he said that a 40a fuse is needed.
I just want to be sure if that means from my battery too.
@@HaNsSiEHans I would stick with the 60 amp still in there. I did have a problem with mine on a very cold day going up a steep hill. It pulled a lot more current and blew the original fuse.
Thanks again :) i have set a new 60a fuse in it.
But now i have a new question of which i hope you can help me.
My battery indicator gives 3 bars left but it shuts down all the sudden and won't turn on anymore..
What could be the problem?
Is this telling that i need to buy a new battery?
I just got one of these. Does the light on the charger change to green when it's fully charged?
You answered my question lol thanks!
How's it holding up?
It is still running fine, thank you for watching the video
Hey man i have the m2 and its been sitting for a while today i try to use it but its dead and when i plug the charge in the light is green when i plug the battery like id its on full, but when i plug the bike to the battery it wont turn on.
If the BMS is damaged on your battery, the charger will not work as it cannot see the battery as the BMS choice to protect it
What is the black connector that you swapped over may i ask.
I’m not sure it’s the same as a UK 13 amp kettle lead
I bought one of these a couple days ago to get to and from work ..... All of a sudden it just cut out like an EMP hit me is this my problem also and how do I get that connector piece
You can get the connectors on eBay or from Amazon
Do you gotta have insurance on it to get it road legal
It is the same classification as a moped and you need a provisional license and a CBT and it will need if not new and MOT and insurance
Hi, what model of connector did you get? Is it a xt60?
Yes it was
Did you have problems registering this ebike?
No I did not.
It came with all the paperwork and just registered it with DVLA
So yours came with a title? Sorry for all the questions. I just got one, and it didn't come with anything
@@shunmoore2449 mine came with a CE certificate and commercial invoice and all I had to do was show proof of insurance as the tax is zero rated I didn’t have to add any money just pay £150 for first registration fee
I have the same exact bike . I didn't have any paperwork. Just printed a billow sale of the internet and was able to register it as a moped
@@jessejohnson7759 I ended up having to return the one I bought unfortunately. The battery and hub motor weren't working properly
I have a question. I'm looking for a controller suitable for my 60 volt 20Ah battery and 400 watt eMoped motor. Thank you. Love your channel.
I have not looked for one but if I was gonna look I would probably look on Aliexpress
Let's see some more of that Viper!!!!!!
Have a look at the lockdown video on my channel
@@swampthing4x4 Will do! Thank you!
There now is a bad ass 4000w version!
why bother with the black connector. just wire it with the connectors that Kev gave you and that would have been job done... (obviously you would have to change the connector on the charger as well, but that wouldn't take long...)
Yes 100% if I have any more problems with it I will. The only reason I didn’t as I didn’t have any more connectors. As I would have to change the connector on the bike and also on the battery charger system. however the black connector has lasted for three years up till now.
JUST STEAL THE CONNECTOR OFF AN OLD PC POWER SUPPLY, IT IS THE SAME.
i have a question i have the same scooter but it started cutting power while i was driving like it goes and stops and i’ve notice a exclamation mark on the bottle right corner of where the miles are display any info on that @swampthing4x4
I have no idea what that is