Thanks. I just used your video to help me replace the charge port board. It went very smoothly. To be fair, I've been fixing stuff for a lifetime, but I think anyone with a bit of fixit in their blood will have no major issues.
Thank you! That was VERY clear, and step-by-step. I used to be a garden-variety helpdesk person at one time, and have wrestled with desktop and laptop cards. Aside from using tweezers and a bit of glue, this was very similar. You saved this seasoned citizen a lot of $$$ today.
@@DIYGeardo i got a new board and that failed. must be the motherboard. thanks for the video it made changing mine easy even though that was not the fault
I have a question, perhaps you can help me: my Samsung Galaxy a51 has a black screen but still loads and can be reset (vibrates). The screen gradually became worse and suddenly stopped working, but sometimes it worked again once I bent the phone a bit. I was too stupid to get a new one but now cannot access my dear pictures! So I had the screen replaced, which changed nothing. The guy will also replace the Flex Cable now. Could it be the logic board?? Because oddly enough, the sound didn't really work nor did it load without the slight bending. As I understood, those are all things which are controlled by the logic board? Would be very kind to get some help!
Hello, I have a question. I have the same samsung a51 phone and it is still working because it still vibrates if I try to boot it up. However, there is no light showing in the screen so I bought a new lcd. The lcd was tested by the shop so I know it is working. But upon installing it on my phone, it still stays black after trying to boot it. Can the charging board cause the issue and not the lcd since the lcd is new and working fine upon testing? Thank you!
I recently had this procedure done, now when phone is put on a the charger and error message comes up saying the battery temperature is too low, charging paused. I've tried multiple different chargers but the same message occurs. The phone and battery have been inside where it's a steady 70 degrees fahrenheit so I do not see how it could be too cold. Any help would be appreciated, thank you
I think my A51 charging port got some sand from the beach ,it gets to start and stop charging continuously, also the fast charging is gone...any advice please how to fix. Thank you❤
Well I think first let it dry first, not sure any moisture is inside or not. After that try to charge if not first step will be replacing a charging port.. then u need to to see the outcome
@@DIYGeardo Hello ,Thanks for the response, i used a hair dryer for the socket ,that was like 4days ago...current situation is like it's charging but the Fast charging is not showing up in display ,but yeah,the phone is charging, what you suggest me next to do? Also,thanks for the response, really appreciate it❤🤗
Hey bro, i think i accidently twisted my headphone jack inside the phone jack and it damaged my jack even though i use different headphones. How do i fix this
Excellent step by step guide. I was able to change a port in under 10 minutes. Thank you!
Glad to hear ✌️
Thanks. I just used your video to help me replace the charge port board. It went very smoothly. To be fair, I've been fixing stuff for a lifetime, but I think anyone with a bit of fixit in their blood will have no major issues.
BRILLIANT! Fixed my phone easily thanks to this video. Thank you.
Glad it helped!
I followed the instructions on my galaxy a51 and everything worked perfectly, thank you very much for making this video
Happy to hear.🙏
Thank you! That was VERY clear, and step-by-step. I used to be a garden-variety helpdesk person at one time, and have wrestled with desktop and laptop cards. Aside from using tweezers and a bit of glue, this was very similar. You saved this seasoned citizen a lot of $$$ today.
Glad to hear that 🙏
thank you! I just fixed my phone charging port now, thanks to your tutorial! cheers mate!☺
Glad it helped
Excellent guide. Thanks for saving me 70 bucks!
Great to hear!
Thank you, I used this video for a successful charger port replacement.
Great
Do you have a link for the board? Thanks in advance
is this board the reason the usb just stoped working for pc connections? it still charges
Yeah most likely
@@DIYGeardo i got a new board and that failed. must be the motherboard. thanks for the video it made changing mine easy even though that was not the fault
I have a question, perhaps you can help me: my Samsung Galaxy a51 has a black screen but still loads and can be reset (vibrates). The screen gradually became worse and suddenly stopped working, but sometimes it worked again once I bent the phone a bit. I was too stupid to get a new one but now cannot access my dear pictures! So I had the screen replaced, which changed nothing. The guy will also replace the Flex Cable now. Could it be the logic board?? Because oddly enough, the sound didn't really work nor did it load without the slight bending. As I understood, those are all things which are controlled by the logic board?
Would be very kind to get some help!
Hello Geardo
How about the fast charging feature, is it still working?
which glue do you recommend to attach for the back cover? thanks for the step by step gideline.
B7000 is good, if not double sided adhesive. i would recommend b7000
Hello, I have a question. I have the same samsung a51 phone and it is still working because it still vibrates if I try to boot it up. However, there is no light showing in the screen so I bought a new lcd. The lcd was tested by the shop so I know it is working. But upon installing it on my phone, it still stays black after trying to boot it. Can the charging board cause the issue and not the lcd since the lcd is new and working fine upon testing? Thank you!
Helo sir my mobile it gets very hot after change charging connector board heat while charging what I do sir plzz tell me the solution 🙏
It can be few things, Maybe Charging Cable /Adapter issue, Charging Board issue / battery or maybe even the main board. Needs to diagnose one by one
@@DIYGeardo ok sir thank uh from 🇮🇳 india♥️
I recently had this procedure done, now when phone is put on a the charger and error message comes up saying the battery temperature is too low, charging paused. I've tried multiple different chargers but the same message occurs. The phone and battery have been inside where it's a steady 70 degrees fahrenheit so I do not see how it could be too cold. Any help would be appreciated, thank you
I followed step by step but my phone won’t boot. It stopped working several weeks ago and I wanted to give it a try. Any suggestions?
will this make fingerprint not work with the new security updates?
So far no issues, it should work
Thanks for the great video!
Glad you liked it!
I'm thinking I will test the charging port before I glue the rear cover on.
For any repair, the best practice is to test the functionality before closing the device
Can this potentially solve network and calling issues?
maybe , it depend on the issue, to start this is a good place.l
no
If I don´t have a heat gun, can I do this with a hairdryer?
Yes
I think my A51 charging port got some sand from the beach ,it gets to start and stop charging continuously, also the fast charging is gone...any advice please how to fix. Thank you❤
Well I think first let it dry first, not sure any moisture is inside or not. After that try to charge if not first step will be replacing a charging port.. then u need to to see the outcome
@@DIYGeardo Hello ,Thanks for the response, i used a hair dryer for the socket ,that was like 4days ago...current situation is like it's charging but the Fast charging is not showing up in display ,but yeah,the phone is charging, what you suggest me next to do? Also,thanks for the response, really appreciate it❤🤗
@@g2bullet try with a different wall adapter and cable. Make sure fast charging option is turned on..
@@DIYGeardo sure,thanks man❤ I'll update you ❤❤🤗🤗
Are samsung galaxy a21s charging port and aux port come as one unit?
Yes
Possible to change LCD connector Samsung a51
Yes possible. Seek a guy who works in board level
Wouldn't it make more sense to test the new charging port BEFORE putting whole thing back together??🤔🤔🤦♀️
Always, you have to test if you have done any repair.
Hey bro, i think i accidently twisted my headphone jack inside the phone jack and it damaged my jack even though i use different headphones. How do i fix this
You need to open the phone and use a pin or something to push the port..go with his guide and you will be ale to do it..
@@DIYGeardo can i just push from the hole without opening the phone?
@@DIYGeardo do you mean pushing it inside deeper or like pulling it outside
@@hannansabran9236 I can say exactly, but I think the safest way is by opening the device.
Thanks phone is back to charging. Any reason why my screen is getting hot now?
Check the connections, if not i feel a bad charging Port or some issues with an IC
ty
Thanks for your feedback..
music is distracting to me.
Sorry about it
Then turn your volume off and hum to yourself.
What is the price of the charging port whole circuit?
I would say less than $15
Indian rupees ma batao
Thanks
Welcome
would it still be waterproof after this
NO, unless you go for the service centre for the repair..
But it worked, my phone is charging.
There are 13 screws!
Why the noisy useless background racket
Thanks for your feedback..