MUTE - The Clean $3000 H400i Build!
Вставка
- Опубліковано 29 сер 2024
- Pushing the NZXT H400i to its limits.
Check prices below
NZXT H400i: geni.us/fGRv
Intel i7 8700K: geni.us/ydAMhfA
Asus Z370-G ROG Strix: geni.us/UVLP
EVGA GTX 1080 Ti SC2: geni.us/w2emd4k
TeamGroup Dark Pro 32GB Memory: www.teamgroupi...
Corsair RM650X PSU: geni.us/AIlUw
Samsung 250GB 960 EVO NVMe: amzn.to/2LbHeX6
EK Vardar EVO 140mm: geni.us/3rGs4u
EK Vardar EVO 120mm: geni.us/l75SguD
EK Coolstream 280mm: geni.us/2gY9v
Primochill Vue: geni.us/BGmiKtF
NCASE M1 Mods: optimumtechmed...
Current gear!
Sony a6300: geni.us/IrGrgYY
Sigma 16mm f/1.4 DC DN: geni.us/kBcA5VN
Sigma 19mm f/2.8 DN ART: geni.us/zUCgeLp
Sigma 30mm f/1.4 DC DN: geni.us/OqYZS
Sony OSS 16-50mm f/3.5-5.6: geni.us/pbto
Twitter: / optimumtechyt
Instagram: / alisayed3
As an Amazon Associate I earn from qualifying purchases.
Thanks for watching!
If you enjoyed this one, you might like my most recent build here - ua-cam.com/video/34UFtj5_-4o/v-deo.html
Nice sleeving and tubing! At 3:52, isn't the TIM quantity well over requirements ? Either for a CPU (shown later in the clip) or a GPU, the same principles should apply. Or is there a specific reason for this ?
eeew white water looks like you filled it up with warm milk.
Computers like milk?
Looks great, what waterblock did you use for the GPU? I struggled to find one which would fit My SC2
Молодец чувак,ты крут!!!!
I have respect for people who use acrylic tubes instead of flexible ones. But when you sleeve your own PSU cables, damn man, that's another level of respect.
He said in some video a few months back that he does it because the cables are truly custom as you can do so much more with them as just ordering a custom length is one thing but he said most made to order cables are not specific to the whole of your system they are only made to work with your PSU and are just rough estimates whereas this way you can cut the exact lengths without even measuring them (just run the the cables through and then cut it when you feel it is long enough) and you can make the inside wire of each cable shorter where the bends are as it puts pressure on the whole cable if it is bent but if on one side there is excess cable
@Omniscient that is nothing the MOST SUBSCRIBED PC water cooling enthusiast JayzTwoCents does that and I have seen it in other youtubers videos too also a pro bending kit can cost like $200 which is not even part of your PC
@Omniscient theirs sharpie marks on tube were he bends so im sure he measured :D
@@owzmo ...lol. In which case I would use angle fittings rather than trying to bend glass ;). Or Acrylic rather than PETG tubes, since acrylic has a neater glass look and can be bent more easily than glass. Else, for a "real thing" I'd go with copper tubing and call the plumber :)...
I'm an applications engineer and I've made industrial grade harnesses with sealed connectors and such, to bring with me on field works. I can tell you that the craftsmanship in this sort of tings is nothing more than using the right materials with the right tools in the right way. Once you got used to making them it becomes pretty tedious and a lot less glamorous than shown in this video, I can personally attest to that.
finally a perfect gaming setup for the average dairy farmer
Thanks
😂😂😂😂
Just what I need
Moooo!!
I would actually tell people it runs on milk
Black, no RGB, no sound, great hardware, good cable management. The dream pc I want and this is perfection
Good luck having to drain and clean the loop every 2 months. I know from experience, and colored liquid is annoying and after the first 6 months, I just went with distilled water and no color additive.
@@blewyd PT nuke and distilled with EK-ZMT.
@@rizzy6087 no
good cable? management? make-ment more to say!
@@blewyd Or you could go with good old air cooling.
"Only took me 3 months to fill it up with my own.."
3 months ago
3days ago
3 weeks ago
Tried it but it doesn't cool that good :(
*Sweet Jesus.*
He puts in the milk so the processors get their recommend calcuim
Optimum Tech Tips
At least you spell it if it leaks
@@user-xq2fz5tz9t lmao
@the summon No the milk would get spoiled and it'd be nasty
Lol
When I realised he was doing his own cabling my jaw dropped, holy shit this was amazing to watch, it is beautiful
G L O P
L
O
P
F L O P
L
O
P
F A P
A
P
What even
h
a
t
e
v
e
n
Let's be honest, this is what we all expected on our first builds
you don't wanna look at my build, totally a mess
Well im about to have my first build
Inevitable me 2
Far from it, I juts hoping it would post
I put the I/O shield on backwards
this dude made his own cables. thats another level.
@@cybermechid9181 I have no clue where he got the components for the cables. I imagine he may have gotten them from the company who makes cables like that already. I don't really know.
It's cool to see how fast tech has evolved in just 3 years, a 250 M.2 SSD used to be high end. Now 2TB is high end.
now 8tb is high end
And now 2tb nvme is normal
Imagine you do all of this and then realize you forgot to install the I/O sheild
Sapta Tech Enthusiast fuuuuuuck 😂
F
Yeah... I did that on my most recent build. I completely finished everything then I stepped on something. I looked down and it was my I/O shield. At least I was using an AIO and not hardline.
@@PapaJuan I'm happy that the most better motherboards have integrated I/O shields... xD
I don't install the I/O shield anymore actually, too much risk of breaking the motherboard.
Those custom PSU cables.. you deserve some serious credit for that. Outstanding build.
I think he needs a padded cell.
Probably the only $$$ PC build video online showing off the PSU cables
ehhh. if your going to custom make psu cables at least route them perfectly sized.. it's like he didnt even measure just did it for looks. the whole build has bunching cables and cables falling out of place.. when
I custom make cables for the level of effort involved it's done once and looks flush to all surfaces
I was so impressed. I didn't even know that could be done. Yes call me a noob ;)
+darkNemesis25 So upload a video and show us your work :)
Shopping list for the pc:
motherboard … check
graphics card … check
fans … check
Heatblower for tubes … check
10 liters of processor milk from grass fed cows! … be right back!
My dad still isn’t back from getting the milk. I wonder whats taking him so long.
@@SmileyTheDuck51 Your dad is getting you a custom loop pc with a 3090 and a R9 5950x! he just still hasn't found the coolant aka milk yet
when you have enough money to make custom watercooling
but you dont have money for coolingliquid so you just put milk in it
Can't you see , it makes him cheese while he plays csgo
THATS WHAT I WAS THINKING TOO XDDDDDDDDDDD
KrabsGotCake I would have made chocolate milk looks cleaner
Sorry to be the cloud over your party but that's what actually industrial grade cooling fluids look like. They have an oily kind of feel to them and yeah, look like milk.
@@diegobahena1274 r/iamverysmart
RGB has left the chat
Almost, but the motherboard has one at 6:57
:(
Shut up with that left the chat shit, peenoise
@@brenlouissurio2404 Can't take a joke but can insult a person. Salty people getting salty for no reason, get some sugar.
@@karlchristianbognot1842 Tell that bitch
Who needs RGB when ur computer is powered off milk
Finally, a youtube build that doesn't look like a cheap carnival ride. 👍
amen.
taipeitaiwan10 it makes me turn off the rgb lights :(
but it sure SOUNDS like a cheap carnival ride!
That's why RGB sucks
That's the truth
I see you have done some plumbing on your PC ...nice :)
nice ark videos im also subbed :D
Who directed this video? James Cameron ?
The level of everything in this video is unbelievable.
My salute for the creator.
Yeah
No RGB makes it seem more “modern.”
Can't tell if you're using modern as negative or not xD
Yeah but it still needs enough lights around it to make it look more beautiful
Like UK..it always doesn't look like in the video if not kept right
There's enough light when the blinds are open ;)
But yeah, the only thing I'd do is add white LEDs with brightness on fairly low.
RGB for kids
Its all good and well but why did you fill it with milk
that is exactly what i said, like word for word. lol
It's cooling liquid, it's white so it looks like milk
"Cooling liquid" just call it what it is 2% gamers always gotta have funny names
exafuckingtly
welcome to the joke @@karlareichenbach4516
5 year's later, and it's still one of the most beautifully built pc's on this platform.
No rgb lights? Thank you ❤
I don't personally like rgb, I feel like it looks gaudy on a PC. Less is more. Pc should look clean, simple, with clutter free wiring and a dual color theme or triple. My favorite combinations black with gun metal grey, black with electric blue, or white with grey.
Agreed RBG makes me sick too, just prefer pure red
ROG logo on the motherboard
You can choose a estatic color whit RGB if u want (and change it whenever you want to) you dont need to nessecary have 100 colors lighting up the rig at the same time ...
Title says clean, not riced out bud
Mom: Leon where's all the milk?
Me: 😐
Not funny
@@deputybluevein93 who asked
Gliese 581c your profile pick checks out
Leon gang !
Dude yo are u that same guy that commented about the hello kitty build on Joey Delgado build
*Walks up to the pc I built*
"I'm sorry I wasn't better for you..."
You forgot the main thing,to turn off the music and let us hear how quiet was it.
it sounds like a squeaking horse
*it was
just hit mute for a similar effect
It's called mute because of the lack of colour
Xoth 😂😂😂😂
Bro mad respect for sleeving your own cables.
Shalitha Jayaratne but it is milk
An anwesome looking build! Really appeaciate the cable sleeving. 99% of youtubers just throw in extensions or order custom cables.
Don't get me wrong, nothing wrong with that. But doing everything yourself is just far more statisfying.
I think I have watched every video since I found this channel, top quality stuff. Small PC's, custom sleeving and watercooling - three things that I like doing myself.
Would love to see you put your Ncase under custom loop.
I’ll second that... I tried custom sleeving cables to length on my last build and just ended up destroying a bunch of pins and connectors before ordering custom lengths.
I'd have to agree, I have watched and done many computer builds and that's the part that stands out to me most. You just don't really see it often.
The smaller your pc the bigger your d**k guys...
Jayz2Cent: Beer cooled pc is the pinnacle of the master race
Optimum: Hold my milk
Life of boris: hold my vodka
what kind of milk should i be using for my H400i?
skim or 3.25%?
@Vishnu Kallurime too, was jsut checking to see somethign had thought it first before i typed "milk cooling system" ahhaha
Almond
3.25 cause if you have extra it taste beater
Full fat 👍
Chocolate
Very cool man! Super build, well done!
-D.
When I clicked this vid I genuinely thought I was watching your channel lol.
same
This is the build that you guys should have done on your no-RGB build!
The bubbles tho
Except the coolent color white wasn't the best pick matte black would have been perfect
5:19 damn. thats a lot of money for a coffe machine
coffee machines are actually more expensive than this build.
JJIT lol what tf are you talking about??? No they are not
@@barrass6337 yes they are. some people take coffee extremely seriously and some of the good coffee machines (not an automatic coffee machine, espresso machines) will cost way more than 3000. those espresso machines you see in some cafes are more expensive than this computer
@@nathanphillips7486 of course there are SOME coffee machines that are more expensive. and no shit the huge ones in cafe's cost over 3000. The average cost of coffee machines range from 500 dollars to 2500 dollars so actually coffee machines ain't more expensive since that guy said only "coffee machines" in general.
@@barrass6337 here in Italy most bars have professional coffee machines that cost even more than 3k. So yeah, it's even below average than the price for a decent one here in IT. And you can trust me, no 500 bucks machine will ever make a coffee even half as decent as the real deal. On the other hand coffee machines for personal use at home start at 60€ but most people drink coffee (espresso) at the bar since it's 1€ or even less sometimes. So actually you can say the expensive ones are the most used. Things change drastically out of Italy though.
I would have used red die and told grandma it runs with my blood
lol
and guess what she would even believe it to be true
Dye*
This pc just told Me im broke in 90 different languages
@David Hyde ahahahahaha lad
@David Hyde You need money to be creative. You can't just pull resources out of your ass.
r/Wooosh
Void361 stfu
Rizzy Playzz shut your bitchass up and go play fortnite
I like this so much more than Rgb stuff.
I could not agree more!
Neah rgb it's much more superior.
Fortricity fortnite channel, you’re probably 12yo
@@bigbadslimee no i'm actually 16 but pls stop judging people based on the games they play there are a lot of people older then me that are playing fortnite so it doesen't mean that i'm 12 if i play fortnite.
Fortricity he’s not judging you based on the game you play. He’s judging you on the fact you made a fortnite gaming channel. Otherwise I would back you up because I am 22 and play Fortnite.
The way he managed to cram all inside this box is so beautiful and the clean manual wiring setup that he made was pleasant.
Sure this is one of the most satisfying build videos to watch.
i still come back from time to time to watch this video. this is one of the greatest builds of all time and I distinctly remember this being one of your most viewed videos on the channel at the time. I'm so happy that the quality of this channel has only continued to improve and the sub and viewer count better reflect your hard work!
When you are too poor to build a computer so you watch these videos to gain some form of satisfaction.
🙂🙂 Are you willing to work for me from Home and I'll send you one like that one
Work like?
It's kinda like watching unboxing videos
@@TheThugzman You'll learn how to code in javascript,html,css,python & thn I'll start you 25/h
@@youricadet1557 I am interested, but I would I have to learn those languages first. For starter I have knowledge in C programming only.
I am so confused? He installed an air cooler and put the gpu in just to completely remove the cooler later and take the gpu out again for the water blocks?
@alan2021233 Protect it how? :o
who knows, probably just to test if all the components work and weren't shipped dead on arrival. if he would have gone straight to watercooling and is gonna test it for the first time and it doesn't work, then he would have to first drain the system before he can remove and replace the parts. on the otherside it could also be so he can measure the cable length for his custom work. but all in all... even if it was going to be air cooled it still looks amazing.
maybe test the part 1st?
Test the fitment since he still had to sleeve his cables.
maybe to show a simple version of the build without water cooling
*That milkshake bring all the boys to the yard.*
damn right, it better than yours
I can teach ya, but i have to charge
The most underrated comment lol
Netflix: are you still watching?
Somebody’s daughter: 5:21
I've had an air cooled AMD FX-8350 for the past 5 years and I'm so ready for something that's not about to take off
exact same situation over here. Try to record music production tutorials with that noise floor, I dare you!
@@elblopex a 60 dollar noctua cooler beats a 150 dollar corsair water cooler in temps and dB
@@tokage933 true
@@tokage933 actually it's the other way around, water coolers are better for burst applications as they have a thermal mass and therefore wont get heat saturated for longer, the tradeoff is they also dont dissipate heat as quickly.
I never understood the whole trend about using milk for watercooling...
edit: I love your build, it is so amazing and inspiring! Keep up the amazing work!
i have a feeling that says i see you commenting on every build video, or maybe it's yr profile pic
ya know when u are eating breakfast cereal at yo pc having a milk pump is so useful
No sure :D there's lotta bob rosses out there!
Well better then ones that use blood
its a cheese machine
wow the build is so cool the fact that you made the cables and the tubes by your self is astonishing, came out really good
that beat drop at 5:50 wes so good
"Clean" goes without saying. Everything is clean on this channel. Nice work
The comments actually made me think that was milk lol
Is it a milk shake machine.???
ravi gupta how else is it going to bring all the boys to the yard?
Yes🥛
omg i remember watching this when i was a teenager and loving it! now im 25 and ive been looking for it forever. i finally remembered toccata, and i had to search toccata overwerk pc build to find it. thank you for sparking my interest in pc's! i now have built 4 pcs and im looking to build a 4080 soon. i have the graphics card already just nothing else lol
Perfect for Minecraft.
LOL
omg hahhaha....
if you think about it. Java is actually bloated so it would be perfect
Even better for minesweeper.
So fucking true. What a garbage engine.
Damn even though I can't afford this for some reason it makes me happy and relaxed when someone builds pc that are really expensive nice video
who else cringed a bit when he attached stock cables only to be blown away seconds later at manually sleeving and reattaching cables to connectors... damn nice job!
maybe to do a test to check whether all the components are actually working perfectly fine, cuz imagine you're doing all the sleeving and then the water cooling, but something ain't working...
I'm not even halfway through the video and I can tell this is going to be the cleanest cable build i've ever seen in my life. The fact that you wen through the time and hassel to make your own cable lengths is truely amazing. Thumbs up from me!
Bro you even manual the power supply cables look at that savage level.
2:43, he is watching a tutorial for it
I've always wanted to see a nice neutral black and white build and holy goodness this is perfect!!
Me: looks at bank account
Bank account: Don’t even think about it.
LMFAO!!!
Just astounding - mind blowing. I am in awe of your professionalism and talent to create such a sci-fi beast. It is July 2020 and I've just seen this 2018 vid for the first time - way ahead of its time. Congrats to the builder and than you for sharing it. Just BEYOND amazing!!
Video starts and Overwerk comes on...
"Oh this is going to be a good one!"
This is the video of someone who has their life set straight.
I’m watching a guy build a pc while he watches a video of a guy building a pc. I call it:
incePCtion
im gonna make sure i film myself watching this next time i build a pc
I'll never stop admiring the amount of skill and artistry that went into creating this build. That said, the impact probably wouldn't be even half of what it is, if it weren't for awesome video production and editing, coupled with an awesome tune. This video really is PC enthusiast's dream. I keep coming back from time to time, just to enjoy this audio-visual PC building masterpiece.
Who else thought of Dracula dancing during this music
Funniest comment ever.
It's a remix of Bach Toccata and Fugue
Chicken Games HD yeah i did
Who else when reading this comment automatically pictured the count from sesame street?
U are burned!!
The fact that the resavoair isn't full and you can see the big air bubble really triggers me
the best cable management ever. I don’t regret liking this video
This is the video that made me subscribe to your channel and I re-watch it every now and again.
This is amazing. Perfect sleeving and bends. One of your best build videos!
The white coolant will do a good job at hiding the white coolant gunk you get after running water cooling for a while.
All jokes aside absolutely beautiful, Keep up the good work.
Why you pour milk in your beautiful loop?? 😂😂. But on a serious note, the primochill vue fluid is said to leave residue inside the loop. What do you think about that?
@Nikea Gamer I'm guessing you didn't read the second part of his comment?
Just saw that EK makes these opaque white ones now too. Anyone knows about whether they stain too? #milkshakepc
@@icehawk3442 Yes they do according to a video from Jay I saw recently. I believe it's second one where he cleans out all the shit it leaves behind.
@Nikea Gamer It was a joke
@Nob0dy whoooosh
after literally making perfection in a standard layout case this man decided he could go even harder and went all the way down the ITX rabbit hole
"Hey guys today were going to make an amazing system, good hardware, good looks, and were gonna cool it all with *MILK* "
Soundtrack name: toccata by OVERWERK
You're welcome
Interesting, how much did they pay for using this track))
the track is mentioned in the description. This comment is useless
@rvidal0001 btw they have many awesome stuff!
Zhexun Ong nobody asked tho
I knew it was it was OVERWERK by just listening those fat synth notes.
I also can't believe you did all this in just over 7 minutes. Very Impressive lol
That is such a great build for the time. It is out shadowed with the most recent CPUs and GPUs these days, but given the time that it was made, that is a really respectable build. The amount of effort put into making the cables and the custom loop is amazing. Incredible build!
This is hands down, one of the coolest build videos I've ever seen, and that's saying something, me being a LTT fan and all. Subscribed!
Sooo clean, finally a build these days that lack those ugly RGB-fest
The remix from Bach was also epic AF
And those bends daaamn, one of the best looking builds I've seen so far
ah yes. the milk cooled pc.
Perfect music, perfect timing, great editing, i turn this on while working out lol
Very neat build. Almost as nice as the Overwerk soundtrack.
It resembles a classic piano song... What is it called!?
@@houssamalucad753 Overwerk - Toccata. Or you wanted J. S. Bach's Toccata and Fugue in D-minor? :)
Caernon Jenkins Nice to see I wasn’t the only one that thought it!
Awesome build and the lack of RGB looks great.
Thanks to this video for showing me an amazing track (OVERWERK - Toccata).
is just a stolen remake of big room edm
Emanuel Golaj What a nonsensical comment
@@-SUM1- this is a stolen song what an dumb idiot are u
My dude you sleeve your own cables...BOSS 💪💪💪! And, I enjoy the music as well 👍!
5:19 Skynut revolution starting in 3.. 2.. 1..
3:52 I think it needs more thermal paste
How can he be so good at building this PC and recording it but puts soooo much paste??
Lol. The dude does his own wiring but puts on WAY too much thermal paste what gives?
@@Tony-nl6pf That's a GPU die which is not like a CPU IHS; missing any coverage can cause overheating hotspots. Excess thermal paste is expelled out of the sides by the mounting pressure. Compare it to 1:03 where he puts an amount people are more familiar with on the CPU IHS.
@@jdmmxbth I know, you put a tiny bit, spread it around to insure complete coverage then put it back together, take it apart and check if you really need to. Putting a bunch makes a mess. Anyone who replaces that paste down the line will question his skills.
@@Tony-nl6pf Fair, but I still got slightly better thermals with more thermal paste on my GPU die than I got when I was being considerate. Cleaning the paste is not such a big deal anyway, and getting 1-2 degree lower temps may be a difference between getting higher boost clocks without getting thermal throttled.
Slightly better than the new Verge PC build
1080Ti was such a chad card. I got six or seven years out of mine, and it still worked perfect when I removed it.
okay we get it you have crazy good cable management😂
Just found your channel, so amazed by the content! This build is my idea of perfection, i hope one day i'll learn all the stuff you can do :D
I never saw someone doing those stuff to the cables, but so cool!
Why not be a computer engineer
Dam, what happened to that gray coolant at the start of the video
that is the gray coolent, he added more contents to like half of and thats why it looks like milk white, its for better cooling or a longer lasting solution
I’ve got a lot of different tech channels in my feed and I’ll often watch videos without checking who they’re from. But with you, I always know in the first 10 seconds, your quality is a cut above the rest. Keep up the amazing work!
3:52 holy fuck, that is A LOT of paste yiiikes. But love the video and music!
This was no Verge $2,000 pc build.. but still ok I guess.
Nothing can match the PC they built
LackingPotatoes nothing can match the way they built it
for the single specs, you are right, but for the liquid cooling system, the tubes, the pump, the personal cables and all that, we are around 3k i think?
What about Jäger or Montagne next time?
this needs more likes
I came back to this video after telling my brother about.
Seriously. Dopest build video ever.
Video card & Motherboard Manufacturer's, if you're reading this... We need you to finally put the pci-e power connectors for your video cards towards the bottom of the cards 180 degrees... (facing down, towards the motherboard), and a hole in the the motherboard to bring that pci-e cable up from the reverse side of the motherboard, and into those video card power slots.
Too many a cable management job looks almost flawless, except for the nice, HUGE bundle of pci-e power connectors staring at us in the face, right on top of those cards where we can only do our best to route them without making things look like a cable waterslide into the darkness of our cases.
or they can just make the power connector extend out using flexible cables that allows you to change it's position.
Maybe look for a pci-e power cable with a 90 degree connector?
Evga powerlink if you’ve got an evga gpu. Can hardly the cables on mine at all now
No RGB? *TAKE MY MONEY*
I know you guys are amazed, so dont forget to like this video! It deserves it
The $3000 PC build just 2 years ago is no less than $1000 right now, and the $3000 PC build right now is 10x better performance. *flies away*
Most intense build ever. Buddy wasn’t joking around with the fire eh.
I’m a true hacker now #PC
lol
reddit.com/r/masterhacker
3:53 does it really need so much thermal paste?
@@yo7opp lol what?! the size of the die matters, not the type of die
Not anywhere close to correct. Too much paste can cause heat dissipation issues. Dude didn't just go overboard, he went straight insane with that paste.
@@dsexton1055 fuck! well I guess I need to take my computer apart now. I spread the paste :( you're saying thats bad?
@@Rezurekt it's best to just put a pea sized bit in the middle and press down on it with a heatsink to spread the paste, it will fill out the gaps it needs to by itself.
@@Rezurekt Did you put paste the size of a chihuahua shit on your processor like Optimum Tech did?
when I saw 1080 ti: wtf???!!!
when I saw the date: ok
I could watch these videos for hours nonstop. Please do more!