THNAKS . ITS A LOT MORE COMPLICATED THAN MOST BIKES IVE WORKED ON..!!! AND THE 400 BERGMAN IS NO FUN EITHER AS THAT REQUIRES REMOVAL OF THE WHOLE EXHAUST SYSTEM AS WELL...!!
Just bought a Burgman with a car tire on the back and just received the correct tire for the bike. Thanks for the video doesn't look any harder than my old Goldwing.
Glad you are getting the car tire off, darksiding is for idiots. I tell them, if you can show me one tire manufacturer who suggests using car tires on a motorcycle I will give it a try. LOL
Very helpful but I saw a few things that bothered me. Never use a Metal Hammer on the axle. You can and will damaged the threads. Get a nice dead blow hammer or one with rubber or plastic heads. And when working on big parts like these, wear proper shoes. I have nearly lost a few toes because I wasn't wearing proper safety shoes. Yeah the Hot temperatures are nasty but I would rather have sweaty feet than be missing a toe or 2. Other than that great video. It sure saved my day, I have an AN650 on my lift right now.
So instead of using a ball peen hammer to remove the axle use a dead blow or a rubber mallet. If you dont have either loosen the nut 2 or 3 turns but leave it on. place a large dowel or 2x4 against the nut and hit the wood to loosen the axle. Never hit the end of the threaded axle shaft. Why? Who has the correct die for threads if you mash them.
3:53 suspend the Rotor ? It's still on the wheel & still attached by axle on the bike & swingarm, should have wrote Hang the single piston generic Caliper cause that's what it is the brake Disc so-called rotor never gets hanged by anything when removing a rear wheel on any bike.
I would be completely LOST without these videos because no one in my state can work on a Burgman. Thanks LeDude!
Thanks man easy to understand for me this video!
What a bunch of excellent videos you've posted! Thank!
I'm not a total idiot but have had bikes for years, but your videos have saved my ass a few times!! so thanks!
Quite possibly the most useful video on You Tube. So hlpful thank you.
You Have save me a bunch of money dude....awesome
THNAKS . ITS A LOT MORE COMPLICATED THAN MOST BIKES IVE WORKED ON..!!! AND
THE 400 BERGMAN IS NO FUN EITHER AS THAT REQUIRES REMOVAL OF THE WHOLE EXHAUST SYSTEM AS WELL...!!
Just bought a Burgman with a car tire on the back and just received the correct tire for the bike. Thanks for the video doesn't look any harder than my old Goldwing.
Glad you are getting the car tire off, darksiding is for idiots. I tell them, if you can show me one tire manufacturer who suggests using car tires on a motorcycle I will give it a try. LOL
Thankyou sir very helpful John from Australia 👍
Video perfetto!! Good job!!
Very helpful but I saw a few things that bothered me. Never use a Metal Hammer on the axle. You can and will damaged the threads. Get a nice dead blow hammer or one with rubber or plastic heads. And when working on big parts like these, wear proper shoes. I have nearly lost a few toes because I wasn't wearing proper safety shoes. Yeah the Hot temperatures are nasty but I would rather have sweaty feet than be missing a toe or 2. Other than that great video. It sure saved my day, I have an AN650 on my lift right now.
Grazie i tuoi video sono meravigliosi
Wonderful! Thanks a lot.
Great video. THANK you!
Great Job, Thank You!!
Very good video.Thank,s.
THX, THX, THX a lot!
Very, very easy!
Wow easy Lessie, thanks
Any chances you could do a video on securing Bergman on a trailer?
I just did my 2009/10 today and my brake caliper is more under and forward than that. Did they change them up?
Are those safety flipflops?
So instead of using a ball peen hammer to remove the axle use a dead blow or a rubber mallet. If you dont have either loosen the nut 2 or 3 turns but leave it on. place a large dowel or 2x4 against the nut and hit the wood to loosen the axle. Never hit the end of the threaded axle shaft. Why? Who has the correct die for threads if you mash them.
Uh Oh. I have a 2018 650 Burgmnan and I cant get the caliper to clear the wheel to get it off. Anyone know the solution?
Can you do a video on removing tire from wheel and putting a new tire on the same wheel? Thanks
Suggest search Fred Harmon tire mount or NoMar tire mount videos. Not Burgman, but same technique.
I really like you video, but I can not get any volume on my PC or tablet
None of his videos have sound, only video and captioning.
Can you tell me where you bought your steel toe cap flip flops from?
Everyone, please wear proper foot ware when working on your bikes. I kept expecting him to tear off a toenail... :)
Yeah, wear protective gear... unless you're doing a video? WTH??
no sound. I watched many videos, but no sound on this one.
3:53 suspend the Rotor ? It's still on the wheel & still attached by axle on the bike & swingarm, should have wrote Hang the single piston generic Caliper cause that's what it is the brake Disc so-called rotor never gets hanged by anything when removing a rear wheel on any bike.
No volume
THE VIDEOS DON'T HAVE SOUND