LAPD Federal Signal Aerodynic Lightbar

This is a real LAPD lightbar , The flash patterns are different since I had to replace the old flasher, but I plan on changing it back to the LAPD patterns. The red front facing light would have been steady burn, When doing the repairs to make the lightbar work again, I forgot to make the red light steady burn, I plan on fixing this in the future. I spent 5+ hours re-wirering it since the last owner had done a very bad job at it.
I'm also missing the center seal but replacements cost way too much so I put a strip of electrical tape. good enough for shelf/show.
Its in really nice shape, and a really cool find.

[@happyjack880]

If this were an LAPD lightbar the red and blue "flashers" would be steady burn. The red steady burn is required by California law.

[@FTAfiretrucks]

If you had read the comments you would have seen that I had to re wire the lightbar and I added the flashing, the original flasher was burned out, and wiring was messed up, it is an LAPD, it even still has the tags. I'm aware of the steady red, I plan on fixing that someday.

[@localsheriff]

As a foreigner I'm still aware CA requires steady burn red light, but is there any specific reason as to why??

[@capitolemiproducer]

A steady red is more visible day or night. And yes it's true. When I see A code 3 in progress I see the steady red more than flashing or revolving lights.Some itty in Nevada, such as Henderson also have steady red

[@thebakerman1]

Finest halogen bar ever made.

[@billmcstafford1996]

Need the red to be a steady burn.. :-)

[@derrickw3021]

And the blue

[@gabegalicia]

Cool 😎 police 🚔 light bar is amazing

[@robertsanchez1563]

Beautiful lightbar. I recently sold one jus like that.

[@lawdog490]

nice

[@johnmoore5505]

Not LAPD unless it has steady burning red light.

[@FTAfiretrucks]

I had to re wire it to get it to work and I hadn't made the red light steady burn by mistake. It is LAPD.

[@FTAfiretrucks]

I wrote about it in the description.

[@TexasMan77]

When did the lapd use these?

[@FTAfiretrucks]

Mid 90s early 90s

[@Jsuttar]

Not lapd if there’s no steady burn

[@FTAfiretrucks]

Again. I get so many of the same comment. The lightbar was rewired to make it function. I forgot to make the red steady burn. I mentioned it in the description and in 10 other comments just like this. It is a real LAPD!

[@Jsuttar]

@@FTAfiretrucks no mention of a steady burn red in your description at all

[@FTAfiretrucks]

@@Jsuttar it says "The flash patterns are different since I had to replace the old flasher, but I plan on changing it back to the LAPD patterns." but fine I will change it.