How to save radio stations when removing battery/ How to clean

Поділитися
Вставка
  • Опубліковано 18 жов 2024
  • Toyota 4runner

КОМЕНТАРІ • 10

  • @ciaranbracey1050
    @ciaranbracey1050 6 років тому

    Can I do this with a mates car? So if I hook both clamps to his +and- of his battery and then hook the other set of clamps to my +and-? Or will this cause sparks?

    • @irockablobeye6525
      @irockablobeye6525  6 років тому

      +Ciaran Bracey you could do that because it's like your jump starting The car

    • @irockablobeye6525
      @irockablobeye6525  6 років тому

      +Ciaran Bracey slight chance you'll get a little spark as you reconnect them. I would loosen the terminals and connect the clamps to them then remove the connectors from the battery starting with the ground. Just be careful not to touch anything around and hold them carefully not to drop or have the cables come off the connectors and short somewhere

  • @kyleneuhaus2446
    @kyleneuhaus2446 7 років тому

    Is that a 9 volt battery?

    • @irockablobeye6525
      @irockablobeye6525  7 років тому

      Kyle Neuhaus hey you can use pretty much anything that's the same style as that and voltage as long as it's over 5v to make sure it has enough power to keep everything active

    • @irockablobeye6525
      @irockablobeye6525  7 років тому

      Kyle Neuhaus I have to check the exact voltage on that battery and I'll give you axactly what I used

    • @irockablobeye6525
      @irockablobeye6525  7 років тому

      Kyle Neuhaus want to let you know I made sure of the voltage and yes it is 9v square battery

  • @mattka5354
    @mattka5354 7 років тому

    Where can I buy this?

    • @irockablobeye6525
      @irockablobeye6525  7 років тому

      Matt A they sell some at parts stores or you can make your own

    • @irockablobeye6525
      @irockablobeye6525  7 років тому

      If you don't want to make one. Check at oreily or harbor freight tools.