Hi sir Jeremiah. I hope you will recognise my comment. Actually im following what your doing right now of what you said in you "How i become sortware enginneer Pt. 1 and 2. So im doing self thought right now and trying to connect with poeple who can help me or to mentor me on my Journey. This is my 3rd day and prakticing 6 hrs a day. Wew! Thanks for your videos.
@@JeremiahPeoples right now this is my 1 month attending in uplift bootcamp, im having a hardtime in javascript, but im still fighting and i will never quit. i keep watching youir videos as my motivation. thanks sir.
Im kind of lost on how to do cable management with my standing desk, so your video is super helpful for ideas! How is the Gorilla Tape holding up for you? I thought about screwing down some velcro straps instead, but the velcro didnt seem very strong! 😂
nice job man! lucky that you only needed a single exposed plug going to the wall otherwise standing desks can be tough. Two of my monitors have those super heavy brick power adapters so I had to get real creative mounting them to the desk legs. I can't tell you how many times I'd get my cables set up, raise the desk and have half my cables get ripped out 😂 I used to use Gorilla tape, but it's super tough to move and you're right, if it's on something that heats up, it leaves behind some residue or even drips. Using stick-on Velcro works great for this, and you can easily re-position things, I picked up a roll that's about the same width as that gorilla tape and rated for 20 lbs
one thing about the adhesive strips on power bricks, is that the bricks generate heat, which can weaken the strength of the adhesive. Now i bought some random ones, so im not sure if high quality ones (or heat resistant) would work around that. One of my monitor power bricks uses adhesives fine, the other unstuck and so now im using a this under-desk laptop tray that i just fashiioned to work to hold a power brick. seems to work
omg this channel is so underrated like 600 likes on a video like that is wild and 25k views walahi man if u kept it up you're going to be the greatest+new subscriber
I just built a PC to sit alongside my Macbook on my standing desk, and even with a KVM all the cables are a total mess! This video could not have been recommended at a perfect time. Love the setup! Question: how do you switching between your PC and your Mac? do you take output from the Anker hub and switch to the PC when you want to switch devices, or do you hvae some sort of a switcher? Finding a switch that worked with both was more challenging than I expected so curious what you are rolling with!
You should consider getting a monitor arm with built in cable management like a VIVO Premium, also a 90 degree USB C cable to laptop so it's not sticking straight out. If you got the monitor stand you'd be able to put a desk shelf on there too so you could hide the other stuff on your desk easier
Great concept, I’m going to use some of these suggestions. But, I was wondering, if you are doing video ( LOVE, LOVE THE BIG MONITOR)!!! Why are you using an HDMI instead of Display port?
Hello good sir, So my question to you is on the gorilla double sided adhesive, when you stick it onto a wood surface when peeling it off the surface does it damage the surface or does it peel off easily?
My frustration is finding a tray that can be mounted BEHIND the desk. My new desks are small and have a back panel so the back of the desk is a flat surface. I'm looking for a 24-32" x 4" tray to hold everything that is mounted to the vertical plane. Everything I find is mounted to the bottom of the table top,the horizontal plane, and that doesn't work for me. Any ideas?
Hi. Very good video. I have some questions: Do you need the Anker docking station "only" for the MacBook or is the docking sttaion also connected to the pc? Which eyboard are you using? I'm very interest how to work as a developer with this BIG monitor ;-) Thanks
Question before I go and replicate this, does that gorilla tape allow for removal of the product without causing damage? I know gorilla glue is super strong I just dunno if there’s a method of removal for the tape
It's only a few months since you posted this video. Did the Anker unit showed signs of falling off or it still stuck in place?? I t hink this is your Anker model A8396. I see there is a model A8392? Which one is better? Where I am from, the A8396 (used) cost just as much as the A8396(new).
by the way can your ultra wide do pip and pbp ? i use a 49 inch monitor that i can use my two pcs my gaming and streaming pc on the right is my gaming and left is the stream pc on my 49 inch ultra wide . allot of ya people that own ultra wides dont know you can do this pip and pbp feature dang ya is underutilizing your monitors
but sticking things with 3M tapes suck cause they are a pain to remove. I usually just velcro hold all of my stuff even if it looks 5% uglier than with the 3M tapes
So, literaly all the dust and hot air blow out from a Desktop through the back panel, goes and fly away to the monitors, desk and to the user. Nope, thanks.
guys..... who let bro cook? my macbook is on fire!👌
This was a broil at best 😅
thx for the pin bro
Love the fact that you drew it out. Such an engineer thing to do 😂
This is the way
Wow, I tensed up when that lens fell over as if it was my own :)
Wooo cable management! Dad would be proud.
I love that you keep the bloopers in 😂😂
Have to to keep it real!
Love the humor, it really makes the video super engaging!
Love the comment, super fun to read lol
Such a great video, thank you! Now to find someone to watch it and do this all for me 😸😸🤞
lol
Hi sir Jeremiah. I hope you will recognise my comment. Actually im following what your doing right now of what you said in you "How i become sortware enginneer Pt. 1 and 2. So im doing self thought right now and trying to connect with poeple who can help me or to mentor me on my Journey. This is my 3rd day and prakticing 6 hrs a day. Wew! Thanks for your videos.
Hows the journey coming along?
@@JeremiahPeoples right now this is my 1 month attending in uplift bootcamp, im having a hardtime in javascript, but im still fighting and i will never quit. i keep watching youir videos as my motivation. thanks sir.
@@markjasonlaotolibaslao9927hop in my discord and @ me. I’ll explain any JS concept you have questions about
@@JeremiahPeoples yes sir. i will. thanks
Im kind of lost on how to do cable management with my standing desk, so your video is super helpful for ideas!
How is the Gorilla Tape holding up for you? I thought about screwing down some velcro straps instead, but the velcro didnt seem very strong! 😂
Gorilla tape is working perfectly!
nice job man! lucky that you only needed a single exposed plug going to the wall otherwise standing desks can be tough. Two of my monitors have those super heavy brick power adapters so I had to get real creative mounting them to the desk legs.
I can't tell you how many times I'd get my cables set up, raise the desk and have half my cables get ripped out 😂
I used to use Gorilla tape, but it's super tough to move and you're right, if it's on something that heats up, it leaves behind some residue or even drips. Using stick-on Velcro works great for this, and you can easily re-position things, I picked up a roll that's about the same width as that gorilla tape and rated for 20 lbs
Beautiful! Gave me so many ideas
Awesome video-- mind sharing what brand/model that dope standing desk is??
Very nice 🎉🙂 good job! Now I’m inspired.
one thing about the adhesive strips on power bricks, is that the bricks generate heat, which can weaken the strength of the adhesive. Now i bought some random ones, so im not sure if high quality ones (or heat resistant) would work around that. One of my monitor power bricks uses adhesives fine, the other unstuck and so now im using a this under-desk laptop tray that i just fashiioned to work to hold a power brick. seems to work
0:36 nice save man! that was about to be 20 minutes picking up keycaps lmao
@JeremiahPeoples, thank you for the video! I am curious where you got those acoustic wall panels.
omg this channel is so underrated like 600 likes on a video like that is wild and 25k views walahi man if u kept it up you're going to be the greatest+new subscriber
Hey as long as you’re watching in good fam 🫡
I have a question should we power on the extension board all the time?
Youre a brave man using adhesive for the powerbrick on the underside of the desk. How has it held up?
Perfectly.should have used Velcro tho
Hey Jeremiah, just saw you on a plane in Italy!! 🇮🇹 Amazing content brother! Can’t wait to see more!
Likewise mate!! I’m looking forward to your next video 👀👀
Very clean thanks for the ideas
fo sho
I’m down for a video breakdown on your monitor
Bet
What cable are you using from your PC to connect ton your dock ?
How do you switch from laptop to pc? Is that with the anker?
I just built a PC to sit alongside my Macbook on my standing desk, and even with a KVM all the cables are a total mess! This video could not have been recommended at a perfect time. Love the setup!
Question: how do you switching between your PC and your Mac? do you take output from the Anker hub and switch to the PC when you want to switch devices, or do you hvae some sort of a switcher? Finding a switch that worked with both was more challenging than I expected so curious what you are rolling with!
You should consider getting a monitor arm with built in cable management like a VIVO Premium, also a 90 degree USB C cable to laptop so it's not sticking straight out. If you got the monitor stand you'd be able to put a desk shelf on there too so you could hide the other stuff on your desk easier
I thought about it but I wouldn’t use the desk space… but thanks for the recommendation, I’ve been having trouble finding a arm that can support this
Fantastic video! These suggestions are super helpful :D
Glad you think so!
Awesome video brother. Cheers from Melbourne, Australia
thanks mate
Great concept, I’m going to use some of these suggestions. But, I was wondering, if you are doing video ( LOVE, LOVE THE BIG MONITOR)!!! Why are you using an HDMI instead of Display port?
Hello good sir,
So my question to you is on the gorilla double sided adhesive, when you stick it onto a wood surface when peeling it off the surface does it damage the surface or does it peel off easily?
the anker will drop off definitely
I think I accidentally welded it up there. lol I should have used Velcro
@@JeremiahPeoples nice
My frustration is finding a tray that can be mounted BEHIND the desk. My new desks are small and have a back panel so the back of the desk is a flat surface. I'm looking for a 24-32" x 4" tray to hold everything that is mounted to the vertical plane. Everything I find is mounted to the bottom of the table top,the horizontal plane, and that doesn't work for me. Any ideas?
Do you have a link to the type of desk you have? Thnx
Mmm I can never link the configuration properly.
I think it s a 70”
Walnut
Looks clean. I approve. ✅🫢
Appreciate it
Hi. Very good video. I have some questions: Do you need the Anker docking station "only" for the MacBook or is the docking sttaion also connected to the pc? Which eyboard are you using? I'm very interest how to work as a developer with this BIG monitor ;-) Thanks
I use an external mic, a streamdeck, and a mirrorless camera as my webcam.
The anker allows me to easily use them with either my mac or my PC
Where did you get your standing desk from, length and width? I have a dual motor standing desk but I made a mistake and got a small desktop.
Nevermind! Saw the most recent video! Thank you!
fo sho
Awesome setup! That monitor looks dope; you should review it.
Say less!
Can you just tell me what monitor it is
@@lucasblanc11 lg 49” ultra wide
What Macbook stand do you use? Nice video, thx in advance :)
MacAlly
www.amazon.com/shop/jeremiahpeoples/list/36CSADD2LLDWP?ref_=aip_sf_list_spv_ofs_mixed_d
Did you plug the cable PC into the extension cable?
yup
Which desk legs are those ?
Is that Anker power station to plug all your USB devices into? Then from the station to the pc?
I plug in everything but my pc. So I can quickly switch between my work Mac and personal Mac
It looks good bro 👌
Thanks fam
Couldn’t see a link for that Anker Hub?
Heyo It’s in my Amazon storefront
great job...👍👍👍👍👍
Thanks!
Haha, just in time. I’m doing my brother’s setup and was gonna wait to do cable management later, but this convinced me to do it now
It’s honestly not as bad as I thought
What’s the best program to learn for Software engineering?
Js
Do you share the DLSR camera as a webcam to both Desktop and Mac? If so, are you using any sort of KVM?
Pc is only for gaming. My camera works with whatever is plugged into the usbc which is usually either my work laptop or my content creation laptop
Question before I go and replicate this, does that gorilla tape allow for removal of the product without causing damage? I know gorilla glue is super strong I just dunno if there’s a method of removal for the tape
if I were to do it again I would use Velcro for the docking station
What desk do you have and what size is that wooden top?
Thanks for the video =)
My pleasure!
What table top do you have?
Walnut
Nice one!
Thanks!
Please review the monitor :)
Say less
where are speakers or sound system?
I usually just use the laptop speakers. I have a google home for music
It's only a few months since you posted this video. Did the Anker unit showed signs of falling off or it still stuck in place?? I t hink this is your Anker model A8396. I see there is a model A8392? Which one is better? Where I am from, the A8396 (used) cost just as much as the A8396(new).
No problems with the melting anker. The model I have should be in my Amazon shop
Nice vid
I appreciate it!
I love your vids ❤ u should post ever day just a hit
It 👀 really good 👍, but I was nervous about how permanent gorilla tape makes things though 😅.
You and me both! I’ll let you know if my whole station comes crashing down
Nice!
Thank you! Cheers!
I just want-to know the size of table top
80x30 Walnut
where is that desk from
UpLift
by the way can your ultra wide do pip and pbp ? i use a 49 inch monitor that i can use my two pcs my gaming and streaming pc on the right is my gaming and left is the stream pc on my 49 inch ultra wide . allot of ya people that own ultra wides dont know you can do this pip and pbp feature dang ya is underutilizing your monitors
It sure can to. PBP/PIP . Its such a slept on feature
but sticking things with 3M tapes suck cause they are a pain to remove. I usually just velcro hold all of my stuff even if it looks 5% uglier than with the 3M tapes
Ahhh Velcro! I didn’t even think of that!
You're adorable!! I was literally just looking for some cable management ideas - I didn't expect to be entertained and laughing!! New subscriber!
I got to do the same but im so lazy
its overhyped
So close to a 100k, at 99.9k
Almost there!!!
@@JeremiahPeoples can’t wait to see the 100k UA-cam award
Bro we have the same effing tabletop. (American walnut i think)
I live in germany 😂
Best desk I could find! It’s been great so far
I tried snapping, my cables still look like crap... Unlucky
Idell dude maybe try clapping
MONITOR PLS?
Can you please help me by saying your desk lenth and width. 😅
My next video I talk about it
Those wires hanging from the monitor. Please hide it behind the monitor stand.
I need a different monitor arm lol I couldn’t bend them far enough
You look so much like killmonger 🙃
You mean to tell me, you didn’t have to spend 1,000$ on a desk that comes with cable management? Lol
So, literaly all the dust and hot air blow out from a Desktop through the back panel, goes and fly away to the monitors, desk and to the user. Nope, thanks.
This could have been a short.
whats a short