RC unboxing comparison: HS 18301 vs Enoze 9303E - Which is better? Watch my newer videos
Вставка
- Опубліковано 5 вер 2024
- Just got the Enoze 9303E in and plan to run it against the HS 18301. Both 1/18 scale with 380 brushes motors.
Botched my HS unboxing so I decided to combine the two.
Additional feedback after setup:
Enoze - Purchased for $48
Metal dog bone shafts($7-10 upgrade)
Tires - softer with more grip
12mm Wheel hex(plastic)
Includes LED headlights
More flexible plastics
HS RC - Purchased for $38
Better overall feel and finish, but...
Tires - harder and more of a plastic type of rubber
Smaller wheel hex(7mm? plastic)
Plastic dog bone shafts
Not a fan of the screwed in battery compartment... also on the transmitter.
No Throttle trim on the transmitter.
Cut the plastic and routed the charge connector up so I don't have to unscrew the cover each time. Downside is only running one battery at time. Might modify later.
Just my observations, plenty of great videos about the HS. Hoping that the Enoze will be even better.
Both use bushings on the axle carriers, will upgrade to bearings. Prolongs axle cup life and reduces wear causing play in the wheels.
Dear MC & RC, do you think that the monster body could be installed on the Enoze? Then in your opinions which are the pros and cons of both compared each other after testing on the field? Thanks for help
Thanks for watching 🤙! Both are great RCs, but I personally prefer the enoze/pxtoys. I like the design, build quality, and I tend to run them harder. I think they have a monster truck version available too, I have this one, the truggy and the buggy versions with no issues yet.
I had the monster truck, truggy, and new Jeep body versions of the HS. The truggy started grinding at the rear diff.
But... HS does have the brushless version available now.
Hello do you have any idea how to bind a new remote to HS18301?
Your videos have helped me a lot :-) Thank you
Thank you for watching and for the support!! I'm glad they're helpful. Let me know what other types of rc videos you want to see, and I'll do my best to deliver.
Gaz 66 cool.
Thanks for comparison. Enoze have replacement parts availability? Come with lipo, lion, nimh or nicd battery?
Thanks for watching🤙! Enoze and Pxtoys(9302) are same, but rebranded.
I get my spare parts from aliexpress, cheap but can take awhile. Comes with a 2s 7.4v
@@motorheadaddictions2761 many thanks
I read many feedback and see many videos about 18311 and they say it is bullet proof. Enoze is as tough too in chassis, plastic, transmission and so on, based on your experience?
Thanks for watching 🤙! I have both and both are solid. My buddy's diff went out on his HS, mine's still good.
I just prefer the enoze/pxtoys more because bang for the buck. Just my opinion. The enoze 9306 is my favorite, then the pxtoys 9302.
Whichever you get, I recommend oil shocks. Same works both brands. Great upgrade for these.
@@motorheadaddictions2761 Enoze is full bearings? Can you confirm?
good video.
Now is more expensive than 18301 but after seen the following video ua-cam.com/video/9MxsoIba6JI/v-deo.html I'm so scared about bushings vs bearings and plastic dog bones. Enoze is full bearings with metal dog-bones, can you confirm?
Found the pxtoys on sale, link below. But banggood service sucks.
Confirming that Enoze/pxtoys have metal dogbones, but I believe they have bushings too. PXtoys 9302 banggood.app.link/ILcueYSMNhb
@@motorheadaddictions2761 this night I purchased the Enoze 9303e following your suggestion. Unfortunately I think that he has bushings on wheels and not bearings. I'm surfing the web without success to find dimensions of bushings and purchasing loose bearings to replace immediately the bushings. I will search them loose because I'm sure they are standard and I noticed many times that the same part purchased as replacement in an RC shop it cost more than purchasing in a hardware shop
@@bipantera here's a link to the pxtoys (Enoze rebrand 1/18) site where you can reference the bearing size. Also have it on banggood
www.pxtoysrc.com/index.php/pxtoys-9300-upgrade-parts-oil-shock-1012.html
@@motorheadaddictions2761 thank you! I also got these information from FB group dedicated to PXtoys. I wonder how long can I run them with bushings without ruining the axles because the car should be here next week but the bearings delivery forecast is September/October. I also would like to build a cardboard body for my son similar to Max-D and I'm searching all exact dimensions of wheelbase, wheel track both inside outside and so on... so to properly fit in with fenders partially covering the wheels from top view. This would lot more more difficult to find.