On the Streamlights you can also push down rather than pushing forward. Haven't tried an Inforce yet but I don't dislike the Streamlights. I do love how the Inforce lights look though an will get one at some point. Good review!
I actually kinda like the lighting effect of the TLR7 better than the Wild1. The hotspot on the Wild is more defined but the TRL has better spill, which can be useful when searching an area. The wild is also a little too white for my liking
White light will effect another person just a tad bit more. I bought the TLR7 for my brother last Christmas, and played with it a bit. But I was more interested in the paddle design of the Wild1 so I literally just ordered it. I was on the fence for months. As a side note I can't stand Surefire x300 paddle, I have had it for about 3 years on my CZP10F and man that thing is rough.
Probably a bit late on this but after installing it I did a 200 round burn in and all the screws backed out. I retightened it up and after another 400 rounds it was solid.
Here’s the important question… what holster do you go with with that setup. Tier 1 has a solid AIWB option for the standard p365xl/TLX-7sub but having trouble finding proven appendix/mag side car setups for this rail adapter/wild1 setup (as bad ass as it is… ) Help!
You could try emailing him and he may make you one. When I had him make money he said it wasn’t a popular enough option to have on his selection. You could also try divitos customs. Not sure if he makes one but he might
Do you find that the paddle at all interferes with your trigger finger under firing conditions? Whether going from ready position to firing? I have an APLc that is great on my VP9 and considering one of these for the P365 when I receive it.
@@severshoots thanks. That sucks but thanks. I already know I’ll get one but I have multiple tier 1 holsters ( not the cheapest ) that I use daily for the aplc. My favorite controls by far.
@@severshoots no doubt looked a little big. I assume it’ll fit my phlstr since it’ll fit my tlr7a, aplc, and even olight mini only small one I have is the Tlr8 but I usually use that for zeroing anyway every once in a Blue moon. Thanks for the review. Didn’t realize it was out yet.
I'm a SIG guy and a PMM guy. Nice pistols you got there! I just compensated my P365X with the Tactical Dev 1913 rail and am researching weapon lights. I've already got an APLc that I'm considering giving to my P365. Do you know if they will work in the same holster?
They will not. The wild 1 is quite a bit bulkier. Mckinatec can hook you up with a new holster though. He has holsters that work with all the tac dev rails
What the hell is going on with this light? I just looked at the website and it doesn't say it was released, but will let me buy one. And no one else on youtube has reviewed it yet.
@@PD-we8vf it was ANR design but so many other companies had put it out by the time I uploaded the video it wasn’t important. You could find one just from google at that point.
You should never use your trigger finger to operate a weapon mounted light. In a life or death situation, our trigger finger needs to go to work as quickly as possible. We need to train to use our non dominate hand to operate the weapon light.
I dunno about you, but there’s no way I’m thumbing the light on and pressing the trigger at the same time. That’s how you shoot something you weren’t supposed to. It doesn’t matter which finger you press the light with as long as you are identifying before you shoot. Prepping the trigger in the dark is a dangerous road to follow my dude.
@@severshoots I'm in Hawaii and while diving sometimes it can be inconvenient to take your gun off you before going into the water because of a non waterproof light.
QC issues happen to every company. Might wanna try contacting them and some patience before you call it garbage 😂 if you got another one and it also didn’t work then you’d have a case but I guess if you wanna jump to an impatient conclusion, you do you 🤷🏻♂️
@@severshoots Yea, you right. That came from a place of frustration lol, immense frustration. I had a shoot on thurs now the pistol won't be ready. Is what it is. Gonna order another one once the return processes...
@@projenitor2387 you’re good bro! It happens! The first time I ordered the tac dev rail it exploded 😂 second one has been perfect over 2,000 rounds 👌🏻 sometimes it be like that
@@severshoots Question, as you are awesomely responsive, and we run similar kit. The light Wild 1. When the cap/bezel is fully tight, its not supposed to illuminate dimly is it?
I don’t have dealers sending me products. Because of that I only review products I buy and I only buy products I know (or that I’m pretty sure) I’ll like. Loved the aplc, knew I’d love this. If you don’t like the overview of features and the comparison to features of other products, that’s on you dude
TITANIUM! Ha ha You claim the wild 1 is titanium. Ha ha ha. Do you not understand how much that would cost? If you just read the info on the website or the promo info inforce sent to you you would understand It is made from 6061-T6 aluminum with Type III MIL-SPEC hard anodized finish. You are welcome.
@@severshoots calling me Karen. So predictable Chad. Let’s move on. I like your message but your videos are confusing. Please tell us what website you purchased the inforce wild 1.
@@PD-we8vf already replied to your other comment on where to find it. And I’m just messing around 😂 if you take anything I say too seriously….. Let’s just say I wouldn’t do that 🤣
On the Streamlights you can also push down rather than pushing forward. Haven't tried an Inforce yet but I don't dislike the Streamlights. I do love how the Inforce lights look though an will get one at some point. Good review!
Once you go inforce it’s hard to go elsewhere. Be warned 😂
I actually kinda like the lighting effect of the TLR7 better than the Wild1. The hotspot on the Wild is more defined but the TRL has better spill, which can be useful when searching an area. The wild is also a little too white for my liking
White light will effect another person just a tad bit more. I bought the TLR7 for my brother last Christmas, and played with it a bit. But I was more interested in the paddle design of the Wild1 so I literally just ordered it. I was on the fence for months. As a side note I can't stand Surefire x300 paddle, I have had it for about 3 years on my CZP10F and man that thing is rough.
Appreciate the video, just picked up a tac dev rail and looking into the wild one and gave good info thanks my dude!
Probably a bit late on this but after installing it I did a 200 round burn in and all the screws backed out. I retightened it up and after another 400 rounds it was solid.
Great review, thank you! Really like that Wild 1
The Wild 1 is aluminum.. Not titanium.
Good catch! Slip of the tongue
You can press down on streamlight. I am interested in the wild 1.. thanks for the video
I like the light output on the wild 1 very good
Have you tried to shove the wild 1 in aplc holster to see if there is any compatibility?
Here’s the important question… what holster do you go with with that setup. Tier 1 has a solid AIWB option for the standard p365xl/TLX-7sub but having trouble finding proven appendix/mag side car setups for this rail adapter/wild1 setup (as bad ass as it is… )
Help!
Mckinatec holsters has a rig called the KinaFlex. You can use Severshoots as a discount code at checkout and save 15% as well 🤙🏻
Most helpful video I’ve seen by far on this light
Hey have you found a holster for the p365xl with td rail and wild 1. The website you mention does not have a option for this
You could try emailing him and he may make you one. When I had him make money he said it wasn’t a popular enough option to have on his selection. You could also try divitos customs. Not sure if he makes one but he might
@@severshootsthanks
Do you find that the paddle at all interferes with your trigger finger under firing conditions? Whether going from ready position to firing?
I have an APLc that is great on my VP9 and considering one of these for the P365 when I receive it.
I haven’t felt the paddle at all with my trigger finger unless I want to
Hey Sever! Will the wild 1 set up fit the same divito holster you used for your aplc inforce? Thanks God bless!!
Also which holster is it becausr theres multiple variations on tac dev and the one that says wild 1 says "XL rail only"
@@XxL4venderxX hahaha super missed your comment but no, no they do not fit each other at all. New holster required
Can you use the same holster for the wild 1 and the APLc?
Negative sir. The wild 1 is quite the thicc boi compared to the aplc
P320 xcompact? Which holosun do you have on there/ did it require an additional plate or how did you mount that, thanks in advance
Also what holster you rockin with the inforce 1 on there?!
@@ryanberg3284 Mckinatec holsters all the way. And I have the 507k. It direct mounts to the p365xl slide
The Wild 1 is advertising 500 lumens but is only putting out around 200 lumens
It’s definitely putting out more than the aplc. At least mine is. So either the aplc is less than 200 or the wild 1 is significantly more
What and where did you get the picatinny 1913 rail for the Sig P365XL
Tactical development
tactical.dev/collections/all-p365-sas-x-xl-products
Can you just put the light on the rail without the included adapters?
Nope. If it were that simple then Tactical Development wouldn’t have made the rail adapter haha
@@severshoots I am new to firearms so wasn't sure, thank you for responding.
Big question is - are the cross compatible on the holsters ?
Nope! That’s one downside. The upgrade is worth it though.
@@severshoots thanks. That sucks but thanks. I already know I’ll get one but I have multiple tier 1 holsters ( not the cheapest ) that I use daily for the aplc. My favorite controls by far.
@@Edc-Guy growin pains 😂 I had hopes when I first saw the looks of the light but 🤷🏻♂️ what can ya do?
@@severshoots no doubt looked a little big. I assume it’ll fit my phlstr since it’ll fit my tlr7a, aplc, and even olight mini only small one I have is the Tlr8 but I usually use that for zeroing anyway every once in a
Blue moon. Thanks for the review. Didn’t realize it was out yet.
I'm a SIG guy and a PMM guy. Nice pistols you got there! I just compensated my P365X with the Tactical Dev 1913 rail and am researching weapon lights. I've already got an APLc that I'm considering giving to my P365. Do you know if they will work in the same holster?
They will not. The wild 1 is quite a bit bulkier. Mckinatec can hook you up with a new holster though. He has holsters that work with all the tac dev rails
Any idea where to find a owb holster for the 365xl with tac dev rail and wild 1 light on it?
Mckinatec holsters. Use severshoots at checkout for 15% off
Inforce light are good budget options, but the x300 is hands down 100% better dawggg
It’s definitely a personal preference thing. I just hate the switches soooo much 😂 I want everything man
Can I use my current Glock with APLc holster with this light?
The wild 1 is too chonky to fit an aplc holster. Sorry dude!
What the hell is going on with this light? I just looked at the website and it doesn't say it was released, but will let me buy one. And no one else on youtube has reviewed it yet.
I got it from the first company to start selling it on their sight 🤷🏻♂️
@@severshoots what company is that? Might be helpful to let us know.
@@PD-we8vf it was ANR design but so many other companies had put it out by the time I uploaded the video it wasn’t important. You could find one just from google at that point.
@@severshoots what? You bought a wml from a holster company? I can not find it for sale on google. What is the link of where you bought it?
@@PD-we8vf www.anrkydexholsters.com/product/inforce-wild-1/
Will this wild 1 fit a stock p354 xl?
No. You need a rail adapter
Hey bro does the head of the Wild1 fit in the APLc’s body?
I don’t think so. The head of the wild 1 is a bit bigger than the aplc. I’ll give it a try when I get home from church and if it does I’ll update you
@@severshoots nice! Thanks and lmk!
@@y0b0yheartless ya they’re completely different. The wild 1 head is wider and it also isn’t nearly as long as the aplc head
Some of these comments are wee todd edd. Nice review.
Have it and love it! Wild1 FTW! Now help me find a IWB holster for it please!
Mckinatec holsters should have it soon if he doesn’t have it already. Use severshoots at checkout and it’ll save you 15%
Where to buy
I didn’t add a link because I literally just googled it and purchased from somewhere that was in stock at the time
Aplc and wild 1 fit same holsters ?
Their website says no. This one is slightly larger.
You should never use your trigger finger to operate a weapon mounted light. In a life or death situation, our trigger finger needs to go to work as quickly as possible. We need to train to use our non dominate hand to operate the weapon light.
I dunno about you, but there’s no way I’m thumbing the light on and pressing the trigger at the same time. That’s how you shoot something you weren’t supposed to. It doesn’t matter which finger you press the light with as long as you are identifying before you shoot. Prepping the trigger in the dark is a dangerous road to follow my dude.
Is it waterproof?
To a certain depth for a certain amount of time. Is that something that you could see being a problem for you hahaha?
@@severshoots I'm in Hawaii and while diving sometimes it can be inconvenient to take your gun off you before going into the water because of a non waterproof light.
@@dynosaur5291 fair. It should be fine. It has a good seal on it
The Wild 1 is made out of Ti?!!!
I ordered an inforce wild one and day one it doesn't work. The LED stuck in the dim position won't turn off.... GABAGE
QC issues happen to every company. Might wanna try contacting them and some patience before you call it garbage 😂 if you got another one and it also didn’t work then you’d have a case but I guess if you wanna jump to an impatient conclusion, you do you 🤷🏻♂️
@@severshoots Yea, you right. That came from a place of frustration lol, immense frustration. I had a shoot on thurs now the pistol won't be ready. Is what it is. Gonna order another one once the return processes...
@@projenitor2387 you’re good bro! It happens! The first time I ordered the tac dev rail it exploded 😂 second one has been perfect over 2,000 rounds 👌🏻 sometimes it be like that
@@severshoots Question, as you are awesomely responsive, and we run similar kit. The light Wild 1. When the cap/bezel is fully tight, its not supposed to illuminate dimly is it?
@@projenitor2387 depends on your definition of dimly i suppose. But i would assume it should be full power all the time haha
I usually never respond. But this is more of a sales pitch then a review. Another amateur.
I don’t have dealers sending me products. Because of that I only review products I buy and I only buy products I know (or that I’m pretty sure) I’ll like. Loved the aplc, knew I’d love this. If you don’t like the overview of features and the comparison to features of other products, that’s on you dude
@@severshoots ok dude, tell us what website you processed the wild 1. That’s on you dude.
@@severshoots You understand candela at all? not a single number of candela on any light...worthless
@@robertoescalante5767 do a better video 😘 then we can talk
I mean if you're reviewing something and you like it, it's going to sound like a sales pitch
TITANIUM! Ha ha You claim the wild 1 is titanium. Ha ha ha. Do you not understand how much that would cost? If you just read the info on the website or the promo info inforce sent to you you would understand It is made from 6061-T6 aluminum with Type III MIL-SPEC hard anodized finish.
You are welcome.
Woooohhh calm down Karen. Would you like a cookie 😂 my tongue slipped. And it says it on the box haha literally just said the wrong metal
@@severshoots calling me Karen. So predictable Chad. Let’s move on. I like your message but your videos are confusing. Please tell us what website you purchased the inforce wild 1.
@@PD-we8vf already replied to your other comment on where to find it. And I’m just messing around 😂 if you take anything I say too seriously….. Let’s just say I wouldn’t do that 🤣