I need a motor to be able to rotate fairly accurately a swivel chair with a 200lbs person in it about it's axis. It needs to be able to do a 180° rotation within 3 seconds and this needs be repeatable ~twice per minute for eight hours! Would this motor be suitable for such a task?
@@tronicgr like how much... Does your move 10:1 and what if I use 20:1 for nema 34 4.6nm . I need to rotate it with motors power off so that I can take potentiometer readings for robotic arm
@@tronicgr please let me know sir. As it is very expensive I don't want to waste money . So please help me know if it can be rotated when power is off. Would b of great help sir. ❤️❤️❤️❤️❤️
Hello, is it necessary to use the RS 232 cable for the safety of the CNC machine to work with the Mach3 program or is it only used to show the values? Please help and thank you very much
@@tronicgr I though its this servo. So 8 arcmin backlash is high or no? Im not sure this backlash on your video is from mounting point or its from gearbox
Hello, may i ask what is the torque of your stepper motor ? And what is the deaign of the gearbox used ?Thanks
What is the accuracy/return clerance with the planetary reducer?
Wow 👏👏👏great video
how much weight NEMA34 can rotate or move when leadscrew is attached between load and motor
1:15min... backlash its scarry
terrible backlash
I need a motor to be able to rotate fairly accurately a swivel chair with a 200lbs person in it about it's axis. It needs to be able to do a 180° rotation within 3 seconds and this needs be repeatable ~twice per minute for eight hours! Would this motor be suitable for such a task?
dr evil chair? damn dude that actually sounds like a fucking beautiful use of your free time
@@notastone4832 It would be for comfortably and smoothly filming drag racing!
@@TheAndyroo770why don't you just attach the camera to the motor?
Am thinking about building a machine, will hold both plasma and router head , are nema 34 motors are good, or will be heavy to them to handle
I have used 23 on small machines 1.2 by 1.2 on 1605 ball screw and have had no problems on the lowest hold setting
What is the diameter of motor shaft ?
So that i can decide which coupler will be needed !
very strong
Great!
and whats the peak consumption and average consumption?
Not sure yet, I'll do some loaded measurements soon
@@tronicgr TY!
Hi what's the shaft dia please
This would work beautifully on a metal cnc machine o.o
Can you give me any online store link of this product ?
Me gustaría que explicaras como lo haces. Saludos desde colombia
I want buy this planetary reducer
Pls guid me
Depending on the type of gearbox you might never be able to backdrive it.
Planetary, you can backdrive them easily. Worm type, no...
@@tronicgr evet
@@omerfarukkutay2012 bombo biba kafat morov booba
Muy interesante eso para mi proyecto que estoy realizando. Pero no se ve como lo haces ni como lo instalas.
❤❤❤❤❤❤
Like
1:23 Is there a gap in the gear wheels in the gearbox?
Just low quality gearbox with lots of backlash...
What is the model and specs for the motor?
Sorry I meant what's the shaft dia on the motor please, just incase you reduced it thru the gearbox
14mm
great
Where can I purchase the long arm/lever that has a keyway in it please ?
Its machined part, not something that is off the shelve to buy. sorry.
thank you
What is schemes ?
hello brother, can I do this without the gearbox?
Sure, but it won't be able to hold much weight...
Did you build the lever or found in the market?
Someone machined it for me and I had to 3D print adapter to fit it on this diameter axle...
hi.. is it possible to control it through arduino
Not like that...
Can we rotate the link with hand if the steppers are powered off...
If the gearbox is low ratio, yes
@@tronicgr like how much... Does your move 10:1 and what if I use 20:1 for nema 34 4.6nm . I need to rotate it with motors power off so that I can take potentiometer readings for robotic arm
@@tronicgr please reply sir ❤️
@@tronicgr please let me know sir. As it is very expensive I don't want to waste money . So please help me know if it can be rotated when power is off. Would b of great help sir. ❤️❤️❤️❤️❤️
From where did you buy the gearbox?
It was gift actually but you can find similar on Aliexpress or ebay
We all came here to watch you break your fingers, very disappointed.
😂
Sorry, I don't use it for speed, so no ninja slicer demonstration 😂
Is it precise?
Of course, its closed loop with encoder. But unfortunately too noisy for use with motion simulator...
@@tronicgr im building a Cnc, but the axes are taking a good load on the motors. Perhaps it solve my problem.
how can you do that sheeshh?
Had to. To show how is not suitable... 😅
Hello, is it necessary to use the RS 232 cable for the safety of the CNC machine to work with the Mach3 program or is it only used to show the values? Please help and thank you very much
The RS232 is to adjust parameters only... not needed in normal operation...
What is the precision with such servo speed?
You want precision and speed? Don't look at stepper motors, looks for real servomotors like AASD-15A...
@@tronicgr I though its this servo. So 8 arcmin backlash is high or no? Im not sure this backlash on your video is from mounting point or its from gearbox
What do you think if I make a big CNC. 1500mmx3200mm. Which engine should I use? step ? Servo? hybrid?
In English please?
Servo is better .reducer needs more speed motor
Backlash??
Well, I used 3D printed joint adapter for the arm... 😅
Descripción
Nice. Can i get the schematic?
what engine is this?
Hasta podríamos negocias uno de esos motores y todos esos circuitos que lo hacen mover
purchase link send me
Link for what? All I have is here: www.thanos-motion.com
OMG Its like 1inch..backlash
Yeah, that 3D printed adapter was not strong enough for loads