3D-printed RC car Chassis 1/10 - INEXPENSIVE & adjustable for - ANY - Body Kit!
Вставка
- Опубліковано 27 тра 2024
- How To Make Fully 3d Printed VolksWagen mk.2 Golf Remote Controlled Car?
In this video my Bro and I will show you how to make a VW mk2 Golf rc Car Using a 3D Printer.
Use 3D Printer make a great radio controlled car. How to make an rc car ? Watch the video to find out now!
Fully Customizable, 3D-printable, Low Cost, Radio Controlled Car CHASSIS
Scale: 1/10
Proudly created by Model FACTORY / mfactory33
DESTINY is fully adjustable to any 1/10th sports/passenger car BODY KIT!
Originally ON-Road, but prospers as an OFF-Road RALLY car as well!
The Chassis in this video is our 3rd generation!
Follow our journey towards the "UNDESTROYABLE" RC car Chassis
Our Website and where you can DOWNLOAD DESTINY
www.mfactory33.com/3rd-genera...
Video Chapters:
00:00 - Intro
00:12 - What we do
02:11 - Steering Assembly
03:46 - Front HUB Assembly
08:02 - Custom DESTINY Explained
09:36 - Front Rocking Arms
11:51 - Frontal Shock Absorber Holder
12:26 - Frontal Frame
12:42 - Our Printing Information
13:48 - Front Suspension
17:06 - Frontal Frame Base
17:14 - Servo Installation
20:57 - Steering Sides
21:56 - Frontal Turnbuckles
23:00 - Assembly of the Rear Section
25:11 - Drive Unit
27:43 - Rear Turnbuckle Holder
28:07 - Rear Turnbuckles
28:22 - DogBones
30:18 - Rear Suspension Holder
30:44 - Rear Suspension
31:23 - Motor
32:03 - FORUM
32:41 - Installing the Motor & Assembling Mid-Frame
33:10 - Connecting Part
34:05 - Frontal Mounting
37:06 - Middle Mounting
39:35 - Wheel Installations
39:58 - Motor Controller and its Bracket
40:55 - Basic 3D Designing
42:35 - Typical Printing Settings
43:12 - Transmitter Receiver Installation
43:37 - Battery Fixing
44:04 - Cheap Composition Settings
44:46 - Download of DESTINY
45:22 - TESTING
47:07 - Outro
▶ SUBSCRIBE OUR CHANNEL : / @mfactory33_builds
#rccar #rccars #3dprinted #3dprinting #vwgolf #rcenthusiast #rccommunity #modelbuilding #modelcars #rcadventure #rcmodellbau - Навчання та стиль
I'm telling everyone in every FB group I'm in about this video, car, and company!
I'm just so impressed!!!!
What a deep dive into the technical details of your chassis! Invaluable insights for anyone considering to bild this on their own or make further improvements. Great video, I love it!
Thank You Daveeeee :DDD
That is awesome guys.
Thanks Ufuk!
Congratulations on the project and documentation. Very nice video!
Thanks Bro ;) I am finishing the next one, so stay tuned!
How do you only have 7 subs?!?!?!? Your channle is so good! keep it up! I know your going places!! :DDDD
Newly born channel on the 1st of January in the Lord's year: 2024 :D
I have some experience in editing and I kinda squeezed all of it into this!
Thanks for your kind wishes!
We really want to do this so I'd like you to be our prophet ;)
Amazing video!
Köszi Ottó!!!
Thanks my dearest Friend 😅😂🤣
chassis mounting proposition:
I actually had the same problem with my project I found it really time consuming to join the car cover and chassis so I asked a mechanical engineering student he prosed to add clips to the bottom outer edge or center
Could you send a picture pls? Get the email from our channel's about page. Thx
or get to the forum and post it. We would very much appreciate your contribution! Peace!
I liked this video, thanks for sharing it !
Glad you enjoyed! Build it well :)
Why don’t you sell them as a kit for those who don’t have 3d printers. I think you guys are amazing! I would deffo buy a chassis kit and body kit from ya’s.
Hey Darrengar,
That is not out of the question! We would very much like to get there one day :D
It is just we are so poor right now that I am not heating the flat I'm sleeping&working in. And you know the apartment is not in Honolulu where February(ies) kinda lukewarm. Here in Central Europe they are more of the chilly kind, if you know what I mean ;) But don't feel sorry for me I'm a tough moth*af*cka! ;)
😂.I’ll tell you what you are…. artists. The video is so entertaining and funny. How are you guys not millionaires? I would distribute your kits in the UK no problem👍🏻🙂
Thanks for that :D
Well I don't really like being boring, so it warms my now soppy heart (:D) if you find us entertaining!
You know there's a good saying kinda popular in Hungary: "those who don't start won't arrive" Well we kinda just started with this kind of editing and content creating.
You cannot imagine how much pressure I had to take from Bro for doing this vid for 6 months. It kinda looks though my "stubborness" don't feel any pressure and boundaries. :D
You can check our other/starting channel where we had a beginning in 2020: www.youtube.com/@mfactory33
Thanks for your Kind support!!!
Great project. But when do people realize W40 is not for lubrication? But I want to print this now
I'm an economist originally so whada expect?? 🤣😆
WOW, nice video! :O
Kössz Atesz! az "I like this" upgrade-je :D
Nice work. Is this available to print? I have a a lot of old rc cars that i can use for parts for this build .
Great video can't wait for your next project great job.
Thanks for your kind words!
Another mod That you may consider is the use of body clips for those who wish to use a Lexan Body, magnets don't tend to hold up well during hard driving.
yep thats we wanna do!
What is the exact size of the aluminium profile? Is the thickness 1mm?
I have a small printer bed 150x150 will the new destiny fit on it?
Really amazing design. Congrats
Hey Eavar,
the aluminium U-profile based system was used only in our first generation Chassis. We left it, because was not available in many countries. DESTINY is our third generation and does not contain any U-profiles. All parts of DESTINY should fit in any printer! We designed it such a way that all printers should print it without any problems.
Thank you very much!
We're glad you like it!!!
@@mfactory33_builds ok thx. I will go for the destiny. I have allready downloaded it. Great job. Respect 😀
Thanks Again@@everardg1954
We hope it brings you much Joy :)
What are the partnumbers of the dif and tamiya axle?
axle tamiya 50823
dif 50602
? :)
Hey Mate!
scroll down on this one! There should be no information you could miss :)
www.mfactory33.com/3rd-generation-rc-car-chassis-v-x-3-destiny/
How idiot of me... thanks. Started printing and parts are ordered.
Looking great so far!!
@@everardg1954
Happy building Mate!
If any new idea appears regarding the chassis design you can share it on the forum on our website!
nagyon tuti ez a video (mosolyt csalt az arcomra parszor 😂 )
tudtok csinalni 1:43 meretben is drift alvazat?
Szevesz Laci! Magyarok előreeee :D
Örülök hogy tetszik a videónk! Igyekeztem olyat csinalni ami nem nagyon van még építősbe!
Sajnos nem tudunk egyenlőre más méretben csinalni semmit, mert eléggé felemészti minden időnket az életben maradás :( De nem adjuk fel! Ha el is jutunk, oda hogy mást is bedobjunk az majd az 1/8 as méret arány lesz, (ez a terv)
Printing the Model but cannot find the Rear Hub for big bearings. File 32 seams to be the Inside. Any Chance to get the new file?
Thanks for spotting this issue for us!
You were right! If you download again you should be able to find everything in there!
Please do not hesitate for correction if another anomaly rises !! ;)
@@mfactory33_builds THX for the Update. Found another Issue. Printed file "07_Body_holder_front" already two times. Ones 99% and still the M3 holes are too big.
@@arrgument123 Thanks for noting!!! we prnited it with ABS, and that did not uncover this issue. In a few minutes we are changing the file!
Me either. Printing all parts in black eSun ABS+. Also the M3 Nuts are loose and do not stay in place like yours from the Video, but doesn’t care. If I didn’t have almost all parts already, I would print all Parts in 98% on my printer.
First of all, very good professional work, I just regret not seeing the total price of the manufacturing? and how many kilos of filament?
Thanks Mate!
Chassis needs around half a kilo of filament.
Servo, motor, battery, controller you have to get and you have so many options so cost varies a lot.
I'd say, if all parts obtained (even pistol grip controller) and a fully built chassis would be around 100-120 USD
But there is the option where you could build it with printed dogbones and drive system... Then cost drops further...
@@mfactory33_builds Thank you for your answer
Where can I get the cad models
We have those. I'm sorry man we are not to give those away... Is anything you'd like to be modified on it? Write it down and my bro creates it and then I update destiny's files so you can have it!
1/10 truck frames soon?
Never say never, although I'd say we're quite far from that right now :(
For the parts that aren’t printed, is there a list available or a link to a compatible kit? I’m new to this, and a list of non-printed parts would be very helpful.
Hey Lev,
Go to our website and click on the chassis picture on the front page
www.mfactory33.com
That's cool
But I don't have a 3d printer I wish I had it so I can make the bmw m3 gtr
Hey Mate,
price of 3D-printers have fallen greatly. They used to be very expensive. Nowadays, you can buy a great one for around ~220 US dollars. I hope soon you can afford one!
@mfactory33_builds well you maybe don't know that I'm from Egypt 😅 but I will save money and buy one for me
Hey@@biscuits. You know, Never say Never!!! I'm currently not heating my flat for 2 years, because I wanna do this :) Right now I'm rather chilled if you know what I mean :D Never give up!
@@mfactory33_builds thank you 😊
Big congrats for you guys. The design nailed it. I printed the frame and build it last days. I had a quick run today and it was amazing to drive. Had to stop as my carson 70A esc was giving issues with brake and reverse.
I really had a lot of fun building it. No issues what so ever😊😊😊
Any update on download able files? I keep trying to download them from the website but they never finish. It keeps saying internet connection error even though I can download other much larger files around the same time too.
Hey Victor,
I tried to look into the issue, unfortunately I do not know what is causing it :(
Many people seem to have no problems at all downloading it, but for some its happening...
@@mfactory33_builds could I get an email to reach out to you for the file? I just tried again right now and it's still giving me the same issue.
@@victorruiz7288 okay
give your e-mail here
and I send you via wetransfer!
@@victorruiz7288 hey victor
send me your email and I share the files via wetransfer!
@@mfactory33_builds hey! UA-cam keeps taking down my comment. Vcicrrp510
Could it be made into a drift chassis?
If you build it with the simple bevel gear system, get the special tires and set the wheels angle I'd say can be done. Although we never had the chance to test it!
Sorry but I keep getting this message can't download network issue.
Someone else also reported this issue. Im gonna look right into it! Any other download is slow? Or wonderfully just this?
I have just done something could you please check it again and tell how it works? Thnx
@@mfactory33_builds Thanks for the quick response I've been away from computer for the last couple of days and download works great now. It's great to see someone build a chassis for RWD as not all cars are 4WD Just so you know I'm 84 and I'm looking forward to building and running this chassis.
Too bad download on your page is not working... 😢
Everything works fine Mate I just checked it!
1. Add to basket
2. Place order
3. Then download with the generated link
I know. That is what I did but the download allways failed half way. I finaly managed to complete the download after 50 times... Ready to start printing now. How many perimiters did you use to print the parts?
@@andrejl8185 I try to look into it. Webpage caching may corrupt downloading I suspect. Thanks for noting this issue! Although, it is pretty strange not happening to every single download. May I ask, that you experienced a similar issue at other website downloads as well ?
What do you mean perimiters? Infill and layer height pretty much are the same everywhere except at the parts highlighted in the video. I knew it, I told my lazy ass brother that we should do something about this, because most of you guys will ask for a very detailed part by part exact settings. The half-wit said and silenced me that everybody who will build DESTINY would be engineers / mechanically gifted people who would know all these questions. Well I was stupid enough to listen to him...
If something is not clear how to print in case of an exact part, ask it here! I'll do my best to convey the message to you as I am not the engineer, but the video guy you know ;)
Amazing work! This will (probably) be my first 3d printed rc car if I dare to start. :) One question: where can I find the model for the rim? (shown here ua-cam.com/video/gocSfy8zPko/v-deo.htmlsi=i8bM-rGEbgMAxsuV&t=2675) My intention is to go cheap first by printing everything and then later upgrading parts. Many thanks.
Good strategy!! Thanks ;)
It is on our website mfactory33.com
Either separate or I think it is in included into DESTINY s files
WD40... NOOOOOOOOOOOOOOOOOOOOOO.
WD40 is NOT a lubricant !!
Yepp, I guesss we are not perfect! :D
We get your notice a lot, so don't worry, we learn :)