i did same it as and connection is established also i made rules on both side but still i am not able to access my remote network...., kindly guide....,
I did everything as you explained. Site to site vpn is established. thanky you but from Site A i can't reach devices in Site B and vice versa. What is the problem? I did also the NAT rule on both routers.
Try with dyn dns from mikrotik, provided your ISP is not doing dual nating, and ensure to enable nat traversal, may be I will create a separate video for that
![Palo Alto VPN - Site to Site step by step configuration [2024]](/img/n.gif)
i did same it as and connection is established also i made rules on both side but still i am not able to access my remote network...., kindly guide....,
I did everything as you explained. Site to site vpn is established. thanky you but from Site A i can't reach devices in Site B and vice versa. What is the problem? I did also the NAT rule on both routers.
Potentially also requires a firewall rule to all traffic.
Is it possible to route the internet traffic from branch 2 to exit from branch 1?
I have the same question as well
On branch2 there is no public IP, only on branch1. What have to change in the configuration?
Try with dyn dns from mikrotik, provided your ISP is not doing dual nating, and ensure to enable nat traversal, may be I will create a separate video for that
i can ping from pc-client router A to pc-client router B, but can't ping from router A to router B, it is fine ?
Yeah, the video is not complete. Add a ip/route/ dst. address your remote subnet, gateway bridge or remote site public ipsec ip.
Aula Top