I have a racing clutch in my rz6000. The spring is a 170 / 330 and I have 60g notched cams. can I switch my cams to unnotched cams and maybe the spring too, so engagement won't be so harsh?
i had my Skidoo clutch spring modifyed for stronger, but its not reving where i want it to take off... can i just drop a stronger spring in or it will afect my top end RPM also ?
@@mudbrats Primary: y had to lurn about sled clutch lol so now i know that i had a 100/290 spring and he put a 160/290 it raise about 3500rpm to 4500, next springs is 200/290 so i guess it will take off around 5000rpm So i ask for the 230/320 and i will add 2-4 grams in my roller cuz of the 320 remplacement from 290 spring... That shoul take off :)
Just rebuilt the clutch on 2016 600 renegade, wish I had ALL of this info before I started. Great vid! Does Adam have a UA-cam channel? Or just on FB? (Alaska)
Great video! I am rebuilding my TRA 3 clutch on my 2016 600 etec. I can't seem to find the torque spec anywhere for the main bolt on the primary... do you know what it is? The manual only mentions the secondary adjustment allen key and the adjustment nut on the primary for positions 1-6 at 89 ft/lbs? Thanks if you can answer!
@ mud Brats ADV when you put the primary back on the crank do you have to line anything up? On some videos I've seen the crank had a white line and they lined up one of the marks on the primary. My 2013 800 ETEC doesn't have a white line on the crank, but if I look very closely it does seem to have a fain scribe line.
Getting into lake cross with my 06 GSX 600 and Im not so much worried about peak rpm, I want the sled to pull harder on the way up, but not too much, because I still ride trails. Would this be done by changing the secondary helix? or can I adjust this with quick clickers and or weights in the roller arm pin?
@@JLBRACING21t That was my wrong doing... I originally thought the Helix and spring were both for the secondary, but the spring was primary and helix for secondary. Adam pulls the apring out of the box and I cut out thew part where we discover it is for the primary -We fired the orignal spring in the secondary with the new helix and I cut that all out but may left some confusion
Another Great video 👍🏼👍🏼 Keep those sled video’s rollin our way till the white gold starts falling again.. ❄️❄️❄️
Sometime Is Now i will - thanks for being here for us!!
Oh ya baby ! Bring it on. Lets race. Great video , nice to watch the pros they make it look so easy.
Mark Bow adam is soooo good - i wont even open my hood anymore
@@mudbrats LOL... Not that when you do open a hood on a newer sled you can actually see anything.. 😂🤣
Sometime Is Now hahaha IKR - my Rev XP is ok... the next generation rev XS has to be the worst! the Rev Gen4 doesnt seem to bad either
What spring didu use
@@JLBRACING21t All parts are in the description
Thank you! Lot's of great info!!
yeah adam is a genius with this stuff!
I have a racing clutch in my rz6000. The spring is a 170 / 330 and I have 60g notched cams. can I switch my cams to unnotched cams and maybe the spring too, so engagement won't be so harsh?
Not sure about this one.... I will leave it for another viewer to answer
i had my Skidoo clutch spring modifyed for stronger, but its not reving where i want it to take off... can i just drop a stronger spring in or it will afect my top end RPM also ?
which clutch, primary or secondary? and is it revving too high or not high enough?
@@mudbrats Primary: y had to lurn about sled clutch lol so now i know that i had a 100/290 spring and he put a 160/290 it raise about 3500rpm to 4500, next springs is 200/290 so i guess it will take off around 5000rpm So i ask for the 230/320 and i will add 2-4 grams in my roller cuz of the 320 remplacement from 290 spring... That shoul take off :)
I’d like to have this guy rebuild my clutches
look him up Back Yard Recreation Adam Furlong on Facebook
@@mudbrats found him. Rite on thanks
Yes keep them sled videos coming!!!! is it winter yet?!?!
That's the plan! Yes it is winter haha
Just rebuilt the clutch on 2016 600 renegade, wish I had ALL of this info before I started. Great vid! Does Adam have a UA-cam channel? Or just on FB?
(Alaska)
just Facebook but he posts daily tips there
Great video! I am rebuilding my TRA 3 clutch on my 2016 600 etec. I can't seem to find the torque spec anywhere for the main bolt on the primary... do you know what it is? The manual only mentions the secondary adjustment allen key and the adjustment nut on the primary for positions 1-6 at 89 ft/lbs? Thanks if you can answer!
i think 89ft lbs what oem spec os for the main bolt . you dont need anything more than that
@ mud Brats ADV when you put the primary back on the crank do you have to line anything up? On some videos I've seen the crank had a white line and they lined up one of the marks on the primary. My 2013 800 ETEC doesn't have a white line on the crank, but if I look very closely it does seem to have a fain scribe line.
yes there is a line machined into the clutches to line up
Getting into lake cross with my 06 GSX 600 and Im not so much worried about peak rpm, I want the sled to pull harder on the way up, but not too much, because I still ride trails. Would this be done by changing the secondary helix? or can I adjust this with quick clickers and or weights in the roller arm pin?
you need helix, springs and then add weights and clickers its a package. Call straightline performance they will set u up with the proper kit
Will a 2010 600 etec clutch work on a 2012 800 etec? If so would the inner components swap over? Thank you.
no it wont
What secondary spring did u put in
i didn’t do the spring in the secondary
Ok you pulled out a new one out of the box that's y i asked
@@JLBRACING21t That was my wrong doing... I originally thought the Helix and spring were both for the secondary, but the spring was primary and helix for secondary. Adam pulls the apring out of the box and I cut out thew part where we discover it is for the primary -We fired the orignal spring in the secondary with the new helix and I cut that all out but may left some confusion