WE GOT A TRACTOR! 1965 Massey Ferguson 202

Поділитися
Вставка
  • Опубліковано 9 лют 2025
  • Red Head Garage obtains a much-needed addition to the shop. A 1965 Massey Ferguson 202! The old Massey gets a tune-up and some much-needed maintenance. This old tractor runs but has no brakes, leaky hoses, poor electrical, and who knows what else!

КОМЕНТАРІ • 16

  • @jaykotulak2739
    @jaykotulak2739 19 днів тому +1

    I have a 1965 work bull 202 with a 200 loader. The guy I got it from hadn’t used it in 6 years, the fuel tank is full of rust. I’ve got most of rust out of the tank, so come Spring I’ll start working on it again. I don’t have a shop 😢

  • @ACF6180T
    @ACF6180T 11 місяців тому

    Thanks for the video guys; I didn't f f the video; I'm going to be doing all the gauges on my 1959 M-F 50, & the only one that's working is the oil pressure gauge. Mine doesn't have a fuel gauge, & it never had lights in the gauges, & the new ones do which I think will be neat once I'm done doing it. I like the humor in the video as well as the content. I rewired mine about 23 years ago when I put in a Pertronix electronic system but never did the gauges. I find your video very helpful. I'm going to sub. just to see the videos on the M-F 202 gasser. Thanks for doing this video.

    • @redheadgarage
      @redheadgarage  10 місяців тому

      Glad to hear it! Make sure to check out our follow up video! ua-cam.com/video/vwlOp9ce5WU/v-deo.html

  • @mick2383
    @mick2383 Рік тому +1

    I have a MF 1959 Gas Special, just finished replacing rear axle seal and rear brakes along with rebuilding the hydraulic pump. Replaced hydraulic fluid with 15w40. A must, replace your shifter boots people if you want to keep the water out of you hydraulics.

  • @OldF1000
    @OldF1000 2 роки тому +1

    Had the same problem with a 1958 Massy 65 steering wheel had to use a cutoff wheel to slice it off

  • @cattoorsxsvlogs1239
    @cattoorsxsvlogs1239 Рік тому +1

    I got a 64 and need to know what to do to replace the clutch. I’m in a program that I have a shop with 12 bays that are open to me and need to know what to do

    • @redheadgarage
      @redheadgarage  Рік тому

      We have yet to replace the clutch in any tractor. However, the basics of it is it needs to be split in half typically. I would recommend looking for other videos out there such as this one ua-cam.com/video/-86G5YOik-Q/v-deo.html We wish you the best of luck!

  • @Feilding8187
    @Feilding8187 2 роки тому +1

    Nice project. Never seen a petrol engine in one. Here in UK they are all diesel engines. Didn't even know MF used a petrol engine in those models. Must use a lot of fuel. 😱

  • @philcovert1513
    @philcovert1513 Рік тому

    Do you have another video on how you finished everything? I have to rewire mine as well.

    • @redheadgarage
      @redheadgarage  Рік тому +2

      Yes we do! In our follow up video we get the tractor back together and working. Also as part of an update since we got it back together: The tractor has been working great for a few months now with no issues!

  • @mick2383
    @mick2383 Рік тому +1

    MF 1959 TO35 Gas Special

  • @JamesLee-ig3bu
    @JamesLee-ig3bu Рік тому

    Question is how much it will cost one of these in bought today ? Does anyone know ?

    • @redheadgarage
      @redheadgarage  Рік тому +2

      We bought ours for $900 of Facebook Marketplace.