Obviously, this is not a commercially produced die. It is a very nicely made custom die intended to duplicate a standard JSB pellet shape in 30 Cal. Its nicest feature is that it doesn't use bolts to hold it together, but a tightly fitting steel ring. This makes it much quicker to disassemble and remove the pellets. Die material is stamped on the side, SKD 11, a high carbon, shock resistant, rust resistant die steel. The 12% chrome content officially makes it a stainless steel. Over all, nicely done. And yes, the music... is a distraction.
BC isn't as useful as you would think. You can't trust the BC manufacturers give you, because BC is velocity dependent, meaning your projectile has not just a different BC for each individual airgun, but it's BC changes in flight. It's much better to use real world data. That's why I use an application called Scopeknob, made by Eric Sanders. It uses something called velocity retention factor, which involves you chronographing at the muzzle and then at 10 yards and then dividing the 10 yard velocity by the muzzle velocity, resulting in a figure of less than 1. It's arbitrary, but it doesn't matter if you always use the same procedure. That along with your scope height, velocity, ect will give a pretty good approximation of pellet trajectory. You then take that data to the range, zero at your optimal zero, and then shoot at a close range and a far range, noting how many clicks away from your zero you are on each, compared to what the calculated trajectory is. You then plug the real world numbers into Scopeknob again, and it adjusts everything to line up with the real world data, using the theoretical data as a starting point. Once there, it prints out a tape you can wrap around your elevation turret that has all the distances marked. I've shot field target with this, and hunted with it, and it works.
By the way, the best way to find BC, if you need it, is to calculate it yourself using real world data. I just started using VRF instead because of Scopeknob.
Good night friend. I would like to know where you got it because I'm interested in purchasing a mold like that? If you can let me know where you bought it I would be very grateful.
@@ldkdjhshhdd6269 tem zap ?I cant find anything on buying one. Is there a link ... to buy one. I would like to mold the those pellets like the jsb .81 grain .357 cal
@@ivanonce2713 Nice matrix, but slugs are better. In the comments under your videos about the mold for slugs, scammers give the false mail for ordering. "srarbullet mail.ru"
i think there was a reason why my teachers in school did NOT have music playing during their lectures...
Such aggravating music made this video unbearable to finish watching😞
Absolutely. I could only stand 30sec of it.
No music PLEASE !!!!!!
Yes,its disturbing and can't concentrate on what you are explaining
Obviously, this is not a commercially produced die. It is a very nicely made custom die intended to duplicate a standard JSB pellet shape in 30 Cal. Its nicest feature is that it doesn't use bolts to hold it together, but a tightly fitting steel ring. This makes it much quicker to disassemble and remove the pellets. Die material is stamped on the side, SKD 11, a high carbon, shock resistant, rust resistant die steel. The 12% chrome content officially makes it a stainless steel. Over all, nicely done. And yes, the music... is a distraction.
Def want one of these. Do you have name of the company who makes these
If you call that music
@@markzimmerman7279 100, % with you
Do you have them for .177 ?
Or flathead/wadcutter for all calibers ? 🤔
Looks cool! I wish the background music was at a lower volume or off.
Turn that annoying background music off. Soooo annoying, can’t understand anything you’re saying.
I also came here to write this comment
So where does one obtain such a die and press parts? It looks great.
So where does one obtain such a die
Please give us a link, bro. It's been 2 years and still no link. I really want to set up.
Do you have these ovens for sale?
Where can I buy .177 and .22
Where can you buy that Mol
Does it make a .50 cal slug for Air Rifle.510 BMG ?
How about the lead wire maker?
Hey ivan could you send a link to possibly be able to buy this ??
How much the mold for both 4.5 and 5.5 mm
Are these .30 caliber dies available, and if so how much USD?
I'd love to get one off those kits for.30 pellets.. How do I go about buying one
please tell me where to get that set-up & price. i want one! P.S., your rap music goota go! Not all is into rap music & turn down volume!
@@jvewaboi5714 did you find who makes it ?
@@josephpeters2367 amigo Necesito un molde regáleme su número o Escríbame Necesito un molde un mol de 35
@@albertoluisradaoliveros257 espanol I speak English
Did you make this set up.
I'm interested, where do I buy, who sells these molds?
How can I get one of your molds in .25 cal.?
Hi mate how can I get one off your molds and do you do any other sizes tia
Price mold?
how about .22? May be 4 cavity?
Bro, how is the pellet you are making made of?❤️👌
hi, where can I get this mould plz?
Vende?
Hello great job you made the matrix yourself and could you buy something like this in 9mm
how to get a form like that for making slug pellets?
Can you provide the BC for the pellet or sulg kit? Trajectory calculators would want that input
BC isn't as useful as you would think. You can't trust the BC manufacturers give you, because BC is velocity dependent, meaning your projectile has not just a different BC for each individual airgun, but it's BC changes in flight. It's much better to use real world data. That's why I use an application called Scopeknob, made by Eric Sanders. It uses something called velocity retention factor, which involves you chronographing at the muzzle and then at 10 yards and then dividing the 10 yard velocity by the muzzle velocity, resulting in a figure of less than 1. It's arbitrary, but it doesn't matter if you always use the same procedure. That along with your scope height, velocity, ect will give a pretty good approximation of pellet trajectory. You then take that data to the range, zero at your optimal zero, and then shoot at a close range and a far range, noting how many clicks away from your zero you are on each, compared to what the calculated trajectory is. You then plug the real world numbers into Scopeknob again, and it adjusts everything to line up with the real world data, using the theoretical data as a starting point. Once there, it prints out a tape you can wrap around your elevation turret that has all the distances marked. I've shot field target with this, and hunted with it, and it works.
By the way, the best way to find BC, if you need it, is to calculate it yourself using real world data. I just started using VRF instead because of Scopeknob.
Hello I want to buy it, how much does it cost? where do they sell it thanks
Ivan Once where can i get that .30 cal pellet module i am interested
How many pellets can make in 1 hour?
Very cool This way ! How do i add one of these to lime? 5,5 mm?
Для получения трёх пулек, головняк невероятный
Where can whe buy those molds what is the naam of it
i am opening the sales link you provided, but there is no product inside. I want to buy it. could you help me please
I would like to buy that pellet maker where I can buy that pls let me know
Thanks for the video, it would be great if you could have add some grouping tests to video
is very good 👍👍👍👍like this
perfeck
Good night friend. I would like to know where you got it because I'm interested in purchasing a mold like that? If you can let me know where you bought it I would be very grateful.
Were can you purchase?
Donde puedo comprar ese molde para calibre .22?
where can i order this
It will be helpful if you leave the link to purchase the Pellet Press Kit. We all will Thank you.
man how to buy the whole set up
Can not find any on DHgate?
I'm interested, and vice-versa, who sells these molds?
That's a great question
Tem ZAP
Tem ZAP
@@ldkdjhshhdd6269 tem zap ?I cant find anything on buying one. Is there a link ... to buy one. I would like to mold the those pellets like the jsb .81 grain .357 cal
Hello I want to know if I can make molds for Slug caliber with that and what caliber are they? where can i buy it, thanks friend
Now how a are these pellets?
How much for the set up ?
How do u get one ????
Where can I get that press? I’d love to have one? How much is it? Is it a money saver?
You and me both 🤣
Hi friend are you still working?
Good Morning Do you sell the mold to Brazil? I'm interested, do it on cal 177 and 22
Where can I buy one?
I want one like this, how do I get it?
how much if I buy that?
Hello, I would like to buy this product, also in different calibers 4.51, 4.52, 5.52 mm. Is it possible?
Cetakan yang sangat rapi, ingin punya juga buat pakai sendiri 👍👍👍
Very nice but how to buy the set up
Do you ship via aliexpress I want to buy? this app of yours is very complicated to make purchases
I want to buy this setup please help me I want buy this
How to buy mold
please put the info up
من اين ممكن الحصول علي هذا القالب
Hi I just want to know how to get one for myself. Those were great looking pellets
Does anyone make swaging dies that you can use in a regular reloading press?
Hallo Iwan, kann ich dieses Werkzeug bei Dir kaufen, was ist der Preis ?
onde consigo comprar estes moldes por favor?
Where can i buy this
Where are these available from?
Awesome results 💯🇺🇸💪
how can i get one of this
No details anywhere to buy this if I wanted to buy how and where would be good can it be purchased and sent to England How much for set
That's all great and dandy but nobody knows ware people can buy them at and how much?????
Gental man How order this molt ?
Felicidades q bien quedan, donde consigo esos moldes tienes un link de la página.
I can by it Bangladesh?
how to buy?
Dear where i buy this
Good day do sell the mold in Philippines im interested, just do 22 and 30, and how much it cost in USD? Thanks
А где купить такую пресс форму,или кто изготовитель?кто подскажет?
Vc vende essa forma no calibre 5.5mm de 18grs
Your Products are out of stock
When they will be available for sale ?
And how to contact you ?
Can give order for this mould?
Can you share the design
Idol ivan, what is the purpose of this video if you’re giving us the link where to buy this mold die.
Amazing! Where can I buy one of these?
This mold is not on the market, please wait for one month. You can enter my online store to find other molds.
www.dhgate.com/store/21382661?extId=gmppyndbOH4OaX9PU3dNtc3FZXPq/9/Yrq4TZEvqHT19PZ4AhMrCXg==
@@ivanonce2713
Nice matrix, but slugs are better.
In the comments under your videos about the mold for slugs, scammers give the false mail for ordering. "srarbullet mail.ru"
Hola , tiene envío a Chile ???
@@ivanonce2713 And what is your store? send link please.
Why didn't you provide the name of the pellet maker? My preference is piss on the accompanying music, what is the purpose when talking?
السلام عليكم ورحمة الله أين أجد هذا القالب
Le prix svp merci
Realy awesome! 🙌
Price for model
.177-.30 or more? Looking for big bore pellets or slugs ?
.25 caliber & .30 caliber,both pellets & boat tail slugs WOULD BE BEST!
Price model
Απο που μπορω να αγορασω αυτο το εγαλειο
Well don keep it up ❤
I want one where I can buy
GOOD DAY I AM INTERESTED IN YOUR MOLDS WHERE I CAN ACQUIRE THEM. AND THE MOST IMPORTANT THING YOU MAKE SHIPMENTS TO MEXICO
Hello sir how to order that
Sir I want to buy this palace making medium in Pakistan
How much