What's the difference between a compound and a polish for your car? Chemical Guys
Вставка
- Опубліковано 15 чер 2024
- Are you unsure of which compound or polish to choose for the job? Follow along as we break down the full line up of compounds and polishes to better determine when each should be utilized. Starting with the V-Line you have access to heavy compounds for removing deep defects like scratches and swirl marks, and lighter polishes to restore pure reflection and glossy depth for unbelievably-shiny paint.
Not every car requires a 3-step polishing job. For cars with light to moderate swirl marks, scratches, and defects, VSS is the perfect one-step polish that cuts hard like a compound and then finishes in like a fine polish to restore a lustrous shine and deep reflection in a fraction of the time.
For lighter imperfections try using V4 All In One Polish to refine the finish while adding a protective layer of sealant.
When fiberglass does get scratched, swirled, and faded from UV solar rays, it needs a tough compound to remove swirls and marks that mar the finish. Phase 5 uses a hybrid abrasive compound to cut away deep swirl marks and scratches, then refine the finish to restore deep gloss, pure reflection, and brilliant shine.
Remove swirls, scratches and towel marks with the combination of C4 and P4! C4 is developed for fast cutting paint correction without long work times and is designed and developed for tremendous results in the shortest time possible. P4 polish technology effortlessly produces flawless results with your DA or rotary polisher. The versatile polish is capable of correcting 2000 grit and finer sanding marks without dusting or leaving behind residue.
Headlight plastic is sensitive to harsh UV rays, which fade the plastic, turning it hazy and opaque. Simply rub the refined cream formula into the faded headlight plastic with a buffing microfiber towel until it turns clear.
0:00 Step By Step Polish Guide!
0:50 VSS
1:40 C4 & P4
2:50 V-Line of Compound and Polish
7:00 V4 All In One Polish
8:00 Phase 5 Polish
8:45 Headlight Restorer
11:00 Like! Comment! Subscribe!!
- V - Line:
bit.ly/3L1WEsS
- VSS Scratch & Swirl Remover:
bit.ly/3AtixMN
- Phase 5 Polish:
bit.ly/3AqMlcW
- V4 All In One Polish:
bit.ly/3HdGBHb
- Headlight Restorer:
bit.ly/3LrU7ts
- C4 Clear Cut Correction Compound:
bit.ly/3n454Im
- P4 Precision Paint Polish:
bit.ly/3N8QwBP
-------------------------------------
● Find a Detail Garage Near You: www.chemicalguys.com/storeloc...
● Website: www.ChemicalGuys.com
● Subscribe to our channel: ua-cam.com/users/Chemical...
● Like Us on Facebook: / chemicalguysmfgco
● Follow us on Instagram: / chemicalguys
● Follow us on TikTok: / chemicalguys
#chemicalguys #detailing #paintcorrection #polish #compound - Авто та транспорт
Get these products today! 👇
V-Line Compounds & Polishes
bit.ly/42AczGb
VSS Scratch & Swirl Remover
bit.ly/42jS93O
Phase 5 Fiberglass Polish
bit.ly/42iqkZS
C4 Compound
bit.ly/44pYAEz
P4 Polish
bit.ly/44kEwDn
Love these kind of videos 👍🏼 class is in session
Glad you enjoyed the video!
Thanks a lot for explanation !! This will help me to choose the good product
Enjoy your detailing products!!
Omg thank you for this video! I was so confused by all of these and what to use and when. For the V line, what Do u recommend pairing as a polisher? For example, would I use V36 after cutting with V32?
Love the how to clips, I see an auto stacker behind you❤, use to import Bendpak here is Oz.
😃 That's awesome! Thanks so much for tuning in!!
I have a 1990 jet boat (fiberglass) i had a guy wet sand it and treat with "ceramic coating" but it still looks oxidized. I want to try the phase 5. What do you recommend for a polish and also what can i use to clean after each river trip. I use hot suace right now to get rid of water spots . Thanks and great video
Great info! Thank Joey and CG Crew!
Happy detailing!
Joey I just recently purchased the 17 product unit Torqx and the entire vss lineup however why do I get dried pieces of vss every where I'm confused yes using CG pad lube and so on..thanks man
Lol , you are very thorough on what each product can do. But you should show an example of say a hood for each product that we would need to use. I feel like the C line would work on my car but then when I go and look at it . I start to doubt my self and thing maybe I need the V line lol.
Thanks so much for your feedback!
If I have the c4 and p4 and also the v4, do I need to have the vss? Or I’m okay with those, c4, p4 and v4? Thank you CG
Awesome video, where do C4 and P4 rank in the V line of polishes? For example does C4 fall somewhere in between V32 and V34, does P4 fall somewhere in between V36 and V38? Thanks in advance!
C4 would have a similar cut to something along the lines of V34 and P4 would act as more of an in between V36 and V38.
@@ChemicalGuys So C4 cuts through p2000 sanding scratches?
Thanks
Happy detailing!
So i can just use p4 its basically the same as vss right? Because my paint aint bad i would like to polish it and get it looking real good was thinking of using meguiers compound and then nufinish car polish but dont wanna cut to much clear coat
After I use VSS do I still need to apply a layer of wax to the car?
I have a black honda with minor scratches in some areas, a little deeper scratches in other areas. Which steps would I take to insure that all the scratches will be removed? And what exactly to use for this process and to protect the paint job from the elements for a better shine.
Compound with a microfiber pad
To all of the professionals out there that may read this or anyone that maybe this that has been detailing for quite a while Chemical Guys usually don't reply to any messages that I post now they may do that for you guys but not for me I have a question for this community of detailers
What do you recommend using for paint that is how would you say the clear coat is starting to fade and not be shiny anymore and losing its luster even though you may polish it other compounds but still can't get the luster to be restored rashine
Just took over a detail business and man I been updating everything w your product and man what a difference in a wash 🧼 hoping to work more w you people in future
Super awesome! Stoked to have you part of the Chemical Guys family!
What’s the best supplies for cloth seats, vinyl dash/doors, and rubber?
We would recommend checking out our Nonsense All Purpose Cleaner which is an extremely versatile cleaner which can be used on a multitude of surfaces and can be diluted to provide different levels of cleaning power.
www.chemicalguys.com/nonsense-cleaner/SPI_993_16.html
Love all your products and they do work but what about when your car is outside unused and it rains and when it’s done raining and the sun dries the water on the car you now have water marks.
Water spots from rain aren’t as likely to leave heavy stains in the clear coat, most of those should wipe off with a spray wax or a quick detailer. It’s the hose water and sprinkler water that have high alkaline levels in them, and those alkaline deposits are what dry to the clear coat and are hard to get off. For the water spots that don’t wipe off, try the chemical guys water spot remover gel, it works great!
In order to remove a ceramic coating from a car is V38 with a white pad enough, or would I need to use V36 for some cutting?
Hey! An abrasive is necessary to remove ceramic such as V36 or even a compound like V34.
Do I need to clean my pad after each section? Or do you use the same pad for the whole car then clean?
We recommend inspecting the pad after doing each section to ensure it's still clean. If it get gunked up with product or contaminants then we would recommend washing it in between panels.
Hello - I have a 2013 Ford Mustang GT - the color of the car is black - it has very light scratches and swirl marks. What type of polish would you recommend?
Hi there! Remove light swirls and scratches by machine polishing with a White Hex-Logic Pad and P4 Precision Paint Polish.
What compound will take off embedded bug stains on front of hood…
Can I go from v32 to v38, or should I use v36 before v38?
Hey! It is necessary to refine with V36 before using V38.
What do you recommend for single stage black paint? Medium scratches from some idiot who decided to wipe the winter storage dust off with a dry T-shirt?
Hi there! Try using a light polish such as P4 Precision Paint Polish with a White Hex-Logic Pad.
What happen to loyalty points. There is not a section anymore for them and i had points
Hi there! Please contact our Customer Service team for assistance.
www.chemicalguys.com/sfcc-contact-us.html
Can I ever skip from V34 to V38?
Hi there! It is best to refine V34 using V36 before a final polish with V38.
I think I seen a cracked bumper up there
Thanks so much for tuning in!
Overrated my ass. Ion care what any reviewer says. I love all chem guys products.
You have to follow the steps. And take ur time for great results
I love u guy ❤
Thanks so much for being part of the Chemical Guys family!!