How to set up your water cooler with Tribeca Beverage Company Please watch this video prior to set up. Please feel free to contact us with any questions 973-913-4568 tribecabeverag...
Thanks so much for the tip on the labels on top of the bottles! I didn't know what they were talking about "no spill" because I was spilling it all over the place!
Thanks for the time to make the video. I learn faster, visually, than reading the manual that came with the cooler. I think this is something the manufacturer of the coolers (Nestle) should have done in this day but I am grateful someone decided to make one.
This was an awesome thank You 🤠..I wasn't sure exactly how to make it work. The first dispenser leak for a whole day😂 This help to not make the same mistakes 🙏🏿💞💞💞
Literally just got one , when I put the jug on it, the jug started draining and bubbling into the dispenser . I started freaking . Didn’t know it was normal
Hello, I got the new Frigidaire cooler. The hot switch is on. When I press the hot switch I am not getting any hot water, instead it's dispensing cold water. Do you know what I missed during the setup?
Any tips for getting the hot water side to dispense water? I removed the faucet and it works under a water faucet. It flows and stops so I know it works it just won’t dispense water on the hot water side from the cooler.
What happens if you plug in the machine and then pour the water in? Cuz I thought it was so easy that I just plugged the machine in and then I put the water on top. Does that mean I remember the machine but it is working fine then I'm getting cold. I haven't tested though hot water yet but now it's pouring out to the hot water so I have. But I just turned on the switch so but what happens if you plug the machine in the wall first and then the other after?
Quick question. If I don´t really care much about the temperature of the water, and I just want to use the device to get my water comfortably, can I still use it unplugged from the wall? I mean, I think this works with gravity, right?
You don't want air to get into the hot and cold water tanks. If you drain it completely before changing the bottle, you will need to bleed the air out by running the water for a few seconds.
I applied for your route driver position. I also started my own business and this email is from that account. You can email or message me through this or any other profile. Thank you. - Jason Feinman
wtf u thought yall would have wound up here from searching “water cooling” for computers. this is awesome
Not really the handiest person so I appreciate you guys taking the time to make this video really helped me set up my water cooler.
This man loves his life. You can tell. Just pay attention. Somewhere. Deep, deep down. He loves his life. Yes.
😂
Just want to add a thank you!!! I was able to trouble shoot my "no hot water" problem and figure out that the outlet was tripped.
Thank you for helping me show my husband I was right that the whole cap does NOT need to be removed
I wish I had watched this video before I pulled my cap completely off and made a huge mess 🤦🏾♀️
Im sure there’s another side to this story woman.
@@evilredBoristhere isn’t
Thanks so much for the tip on the labels on top of the bottles! I didn't know what they were talking about "no spill" because I was spilling it all over the place!
Thanks for the time to make the video. I learn faster, visually, than reading the manual that came with the cooler. I think this is something the manufacturer of the coolers (Nestle) should have done in this day but I am grateful someone decided to make one.
Glad it was helpful! Where are you located we might be able to help deliver?
@@waterexpertstribecabeverage East Hartford, Connecticut.
@@teknerd we don't deliver there yet but we are pretty close
I love my Tribeca water cooler. The video has provided me with some great tips and features I didn’t realize I had access to on the cooler.
Thanks so much and glad to hear
The 1:37th minute really helped me thank you.
Thanks brother!! This video was better than the darn instructions given to me!
i work for Culligan Water Co and i just brought a cooler home from work today so i had to look up how to set it up
God bless you.This was very helpful.
This was an awesome thank You 🤠..I wasn't sure exactly how to make it work. The first dispenser leak for a whole day😂 This help to not make the same mistakes 🙏🏿💞💞💞
Excuse me kind stranger did you cooler come with foam inside ? Are you suppose to remove that before using it?
Update no you keep it on
Thanks for the info. Everything works like a charm now.
excellent video. was wondering why my hot water wasnt dispensing. thank you
Thanks bro.. the tips is really helpful
Step 1 should be to run diluted vinegar through it. 6 cups hot water and 2 cups vinegar. Let sit for 20 minutes then flush out several times.
Thank you! I did this with my PC and it's now very cool but won't turn on though...
Do you have too buy a new bottle each time ? Or can the bottle be refilled
Thank you all your information was very helpful
I learnt something, thank you.
What about the syrofoam in the back? Do I remove the back/coils to take this stuff out?
very informative! Thanks!!
Thanks I did this with your video. Great video!
I have a slow water flow, it pours then it stops then it sucks water from the bottle then pours at the same time. How to fix?
Me toooo
What is the hot water is not working?
idk
THIS IS JUST WHAT I NEEDED
Literally just got one , when I put the jug on it, the jug started draining and bubbling into the dispenser . I started freaking . Didn’t know it was normal
Hello, I got the new Frigidaire cooler. The hot switch is on. When I press the hot switch I am not getting any hot water, instead it's dispensing cold water. Do you know what I missed during the setup?
thank you so much
Any tips for getting the hot water side to dispense water? I removed the faucet and it works under a water faucet. It flows and stops so I know it works it just won’t dispense water on the hot water side from the cooler.
Hot water success 🙌🏼
I'm wondering how to switch the cooler and heater mode on an old neverfail dispenser
I’m in setup. Hot water isn’t coming out but it is in cold water. Says don’t plug it in until hot water comes out!?
Thank you I appreciate your video!
Thank you!
What if you removed that tag 🏷 and the thing that get punctured?
I jave sonar K9c water dispenser. When i place water bottle on top it bubbles then water start flowing out of dispenser through the bottom
What happens if you plug in the machine and then pour the water in? Cuz I thought it was so easy that I just plugged the machine in and then I put the water on top. Does that mean I remember the machine but it is working fine then I'm getting cold. I haven't tested though hot water yet but now it's pouring out to the hot water so I have. But I just turned on the switch so but what happens if you plug the machine in the wall first and then the other after?
is it possible to replace the plastic bottle with glass?
Love my water its soooo good im upgrading to 5 bottles a month
Thanks so much!
can you emaill us at support@tribecabeverage.com
Mine has a part of the cap floating inside the water,is that okay?
Quick question.
If I don´t really care much about the temperature of the water, and I just want to use the device to get my water comfortably, can I still use it unplugged from the wall? I mean, I think this works with gravity, right?
Yes, I believe that power is just for hot water. The system works on gravity.
What about the white plastic thing in the middle, do we take it out?
Mine says replace bottle even with full tank of water ... What's the issue ?
You don't want air to get into the hot and cold water tanks. If you drain it completely before changing the bottle, you will need to bleed the air out by running the water for a few seconds.
What if i remove the white cap on top of the can?!!
Thank you
Just got this water cooler from Oasis and the hot water is not working nor is there a hot water on and off switch!! Help, no hot water!!!!
Ok. So I'm confused. How does the water come out of the spout without a tiny chimpanzee?
Thanks for the help cutie🥰
Does that outlet need to be GFCI protected.
Thankyou😊
Do you have to take the sticker off? I’ve done it without taking it off and it still works I don’t know if it’s bad for the machine or me though
There's a chance that the sticker will not get punctured and will float in the water inside the jug. If that doesn't happen, it's fine.
Is there an inner plug under the security seal?
my water dispenser is missing the stem ? is it useless ?
What brand is the water cooler
Thanks
Thanks bro, now my pc is not working :)
Did it use socket
Can I use coke there
How do you remove the tank?? It keeps getting stuck and I can't remove the tank
We will probably do a video for that
How to clean fillter
Is not helpful because it's not shown from the unboxing stage. It's already unboxed -- from thereon you already know
Elio Genao
Paterson NJ
Mike DAmelio Wantage NJ
I applied for your route driver position. I also started my own business and this email is from that account. You can email or message me through this or any other profile. Thank you. - Jason Feinman
Thanks for applying I will reach out
Y7K AO0 kV =( mulk kneel )
Thank you
Just got this water cooler from Oasis and the hot water is not working nor is there a hot water on and off switch!! Help, no hot water!!!!
It could be a cold only water cooler. Was it labelled a cook and cold?