Oh my goodness for the life of me this was what I was trying to find on UA-cam. Trying to remove the overload of towel bars in my bathroom installed by previous homeowners! Thank you so much! I was almost going to rip it out of the walls!
Had a similar problem with my towel hanger…screw was worn out and I could no longer use a screwdriver. Your video stopped me from buying expensive equipment. Many thanks.
BRO!!! You are a life saver!!! I was about to take a hammer to my toilet paper holder but you just saved me a new sink cabinet and a toilet paper holder!!!
I have been trying to figure out how the ones at my sisters house come apart for weeks, one is loose that I want to fix for her. I didn’t want to make it worse. I finally decided to search for a UA-cam video hoping someone else had this challenge 👏👏👏 This is magnificent Thank You 🙏. These are slightly different but, do push up so now I am able to fix this toilet paper holder 🤩
I was searching the internet for about 30 minutes trying to figure out how to remove my toilet paper holder with no set screw. Thank goodness I finally found this video. Toilet paper holder pivot arm not fixed!
THANK YOU! I have a toilet paper holder and towel bar that I want to reuse in my powder room and while the design on its retaining clip is a little different, your removal instructions worked perfectly. Didn't damage the drywall, either! Bless you for taking the time to post this video. 😊
This was so helpful! I haven’t seen this style of bracket before and was stumped on how to remove it. Now I can paint our cabinet without trying to work around it.
Mine ended up have a bracket that you slide the holder up to release or down to engage and lock into place. You helped SO much!! Thank you!!🙏🏼 Awesome video!👍🏼
Thank you for posting! It took me about 30min to find your video for my toilet paper holder. Might want to add “and toilet paper holder” and “spring loaded” to the title for others. So appreciate you!
I had one with no pinhole also and I watched the video and the whole towel bar just lifted off. It was not spring loaded like the one in the video. No twisting and no pinhole. Just a variation on the one in the video.
You push up and the top needs to tilt toward you not away from you to the wall. You pushed it up enough to force it off the bottom spring which let you get it off but much easier and less likely to break the wall to push up and till the top toward you to to get off with less effort.
Yeah i didn’t want to set up my 4k camera and microphone with a gimbal. And give a 3 min introduction on how to fix this. Straight to the point. It did gives a broad idea on how to do it. Thanks for the coment
Dude, you rocked it. I only needed 40 seconds into the video. It was exactly what I was looking for. Don't worry about the rude comments, some people just need to bring other down. Well done & thanks@@ZaMuMx
This video saved me from 3 months of frustration trying to get the towel bar off. Thanks for posting it!
🫡
Right ? Me too
I’ve been trying to take my towel bar off for the last 30 minutes. Found your video and you saved me. Thank you for your help.
Glad it help you. 💪
Oh my goodness for the life of me this was what I was trying to find on UA-cam. Trying to remove the overload of towel bars in my bathroom installed by previous homeowners! Thank you so much! I was almost going to rip it out of the walls!
THANK YOU!! Yours is the only video I could find for this type of hanger! You saved us all!
@@buffalobob121 yep thats why I posted! Thanks for watching
Thank you soooooo much for posting this! I was so frustrated trying to find a video for this type of fixture.”!
Had a similar problem with my towel hanger…screw was worn out and I could no longer use a screwdriver. Your video stopped me from buying expensive equipment. Many thanks.
BRO!!! You are a life saver!!! I was about to take a hammer to my toilet paper holder but you just saved me a new sink cabinet and a toilet paper holder!!!
If it had not been for your video I would have a huge hole in my wall. Thank you!!!!!!
My man! You saved my wall. Thanks brother
I have been trying to figure out how the ones at my sisters house come apart for weeks, one is loose that I want to fix for her. I didn’t want to make it worse. I finally decided to search for a UA-cam video hoping someone else had this challenge 👏👏👏 This is magnificent Thank You 🙏. These are slightly different but, do push up so now I am able to fix this toilet paper holder 🤩
I was searching the internet for about 30 minutes trying to figure out how to remove my toilet paper holder with no set screw. Thank goodness I finally found this video. Toilet paper holder pivot arm not fixed!
😎
THANK YOU! I have a toilet paper holder and towel bar that I want to reuse in my powder room and while the design on its retaining clip is a little different, your removal instructions worked perfectly. Didn't damage the drywall, either! Bless you for taking the time to post this video. 😊
Wow I’d never have figured this out. You rock, thank you!
Thanks for this. I made a big hole in my drywall trying to pull this off. Now i know how to remove the second one lol
This was so helpful! I haven’t seen this style of bracket before and was stumped on how to remove it. Now I can paint our cabinet without trying to work around it.
2 Years later you saved me a lot of frustration. Doing Gods work TY!
@@alott287 teo years??? You been putting it aside?? Haha
Thank You - this saved me hours trying to figure out how to remove an old accessory. 1:50
Thank You so much!!! You just save me so much time of drywall repair 😅! 🙏🏼
Thanks for posting! This was extremely helpful. I think we’re all here for the same reason, frustration!
Mine ended up have a bracket that you slide the holder up to release or down to engage and lock into place. You helped SO much!! Thank you!!🙏🏼
Awesome video!👍🏼
Thanks carnal. I just tapped up from bottom of mount with a paint stick and rubber mallet.
Perfect timing! I’m remodeling my bathroom this weekend. Thanks!
Thanks for posting this! A real life saver.
Thank you for posting! It took me about 30min to find your video for my toilet paper holder. Might want to add “and toilet paper holder” and “spring loaded” to the title for others. So appreciate you!
Helped me as well! Thank you! about 20 different similar Google searches until I could find you!
Thank you. This was driving me crazy. Great video
Wow! Thank you so much!! I almost ripped it out of anger
😂👍
Thanks for the video, exactly what I was looking for!
Dude thanks a million. I'm helping someone Uninstaller these and put new ones thinks. I'm glad God led me here thanks 🙏
Thank you, no other site had what I needed.
Dude. Appreciate you for this!!!
THANK YOU!! I couldn't figure this out, so I appreciate your video post!
This worked for me! I about knocked myself in the head with the bar cause I pushed up so hard. Thank you!
Thank you thank you I’ve been looking for days you are awesome
Omg you are amazing for posting this. I couldn't figure it out for the life of me .🎉
Thank you so much! I was scratching my head on this one.
Mine is a little bit different but pushing up was key. Thank you for posting.
Worked perfectly. Less than 5 seconds to get it removed
Yes! F***! Finally a win on one of these tiny house annoyances. Thank you.
Thank you so much! This video is so simple but saved my life thank you 😂
You saved me!!! Been trying for 45min
Thank you so much for sharing your experience and knowledge!!
Thanks for sharing! It was so easy.
Thank you for the video i have been struggling trying to remove mine that doesn't have the screw.
I had one with no pinhole also and I watched the video and the whole towel bar just lifted off. It was not spring loaded like the one in the video. No twisting and no pinhole. Just a variation on the one in the video.
Thanks so much. You really made my day.
I have this exact toilet paper mount and was wondering how to take it off!!! Thanks!
My girl was talking me into ripping it off the wall, thanks pal
🤣🤣
Thank you for making this how to video!! 🎉
Thank you! This was a lifesaver tip
You kick ass , appreciate the help man
Thanks for posting. I have never seen that setup before.🍺🙂
Thank you very much for posting this!!
does anyone know who makes this towel bar. I have them and they should be outlawed. It should NOT be this hard to remove a towel bar for painting .
Helps a lot, thank you so much.
Great video. but I have to admit I was rooting for the holder for a minute there.
Thank you!!! This was very helpful 😊
That was super helpful!
You just save my life !!!!
Because of this video, I was able to fix the toilet paper holder
hell yeah
THANK YOU!👏🏽
Thanks so much. This really helped me!!
thank you.so much for sharing.
thank you soooo much! worked like a charm!
Thank you!
THANK YOU SO MUCH! YOU ARE A LIFE SAFER!!! :)
Thank you very much for. Posting that!!!
Thank you!!! I almost ripped it off the wall. Lol
You saved me!!!!!! ❤❤❤❤
Thank u! Been killing myself trying figure out😖
You push up and the top needs to tilt toward you not away from you to the wall. You pushed it up enough to force it off the bottom spring which let you get it off but much easier and less likely to break the wall to push up and till the top toward you to to get off with less effort.
Beautiful!! Thank You !!
Thank you!!!
Mine was just a quick “pop up”. It was just hanging in two brackets.
Thank you! You saved me too
Thanks helped me
Life saver!!
Yessssss thank you sooo much!!!!!
Awesome!! Thank you!!
Thank you .
I almost use the saw😅
No broo!!! Haha
Going to try this now.
It worked! Thank you so much.
Thank you so much!!
Thanks!!!
Thank you man
Thank you kind sir
Crazy how idiosyncratic they are. Hope you took the opportunity to put a more normal one on. Thanks for the example.
Thank you 🙏
THANK YOU
THANK YOU!!!!!
Thanks
THaNK YOU
Legend
This doesn’t work with all hole less racks :(
Push up, forward & down.
❤
Ridiculous design.
Weak video. Poor audio poorer demonstration
Yeah i didn’t want to set up my 4k camera and microphone with a gimbal. And give a 3 min introduction on how to fix this. Straight to the point. It did gives a broad idea on how to do it. Thanks for the coment
Dude, you rocked it. I only needed 40 seconds into the video. It was exactly what I was looking for. Don't worry about the rude comments, some people just need to bring other down. Well done & thanks@@ZaMuMx
Worst design on planet earth
Thank you!
Thank you!!!