How to Fix AlphaRex Hyperflash Issue
Вставка
- Опубліковано 26 вер 2024
- During our latest install of Loki's new AlphaRex Nova series headlights, we ran into the common issue of hyperflash. During our pursuit of correcting our AlphaRex Hyperflash issue, we noticed there was a lot of info addressing hyperflash as a general problem with LED upgraded lights and not much info on how to resolve the issue specifically for an AlphaRex product. with how easy the process was, we wanted to help others with the same issue and help guide them on how to resolve the issue.
click here to check out Loki's original AlphaRex Headlight install - • AlphaRex Headlights In...
To learn more about us and ways to support the adventure
Check out our website: SunshineStateV...
Visit our store: sunshinestatev...
Visit our Patreon: / sunshinestatevikings
Follow us on Facebook and Instagram: @SunshineStateVikings
To keep up with our adventures, be sure to subscribe and hit the notification button.
You would think that for $1200 the company would figure it out so you would have any issues.
Just installed mine and got the hyperflash issue on the drivers side. Waited 65 days to get them and then this. They are sick looking but this shouldn’t happen…
not to mention their customer service is fucking awful
Second gen Tacoma owner. Love these AlphaRex headlights. Hyper-flash issue drove me nuts. Reached out to TacomaBeast and they sent me a pair of resisters. Watched this video and the issue was resolved in less than 20 minutes. Thanks for a quick and easy fix Zach!
No problem! Thanks for leaving a comment like yours, it lets us know we are doing a good job and helps motivate us to keep trying to make useful content like that! ✌️😃 enjoy the lights we still love ours.
Hey man I have the same issue and I need the resistor. How can I order them from Tacoma beast?
Saw this video too late. I had the same issue, contacted alpha Rex about it and they never got back to me. The hyper flash drove me so nuts I stopped using my turn signals all together because it was a constant reminder that my $1000 headlights weren’t working properly lol. Sold the truck a few weeks ago. Thanks for sharing this. Now I won’t hesitate buying alpharex again, loved them.
Oh no! So sorry to hear about your experience, your story is one of the many reasons we try to make content like this. We simply want to help others with information we have learned ourselves!
Yo im doing the same thing your doing! But i still got the truck. Got mine from the retrofit guys and i ask if they can send me the resistors and they said its not going to fix it. But this guy is doin it and it fix it! I dunno man.
@@SunshineStateVikings can you help please.
What's cool is that your Tacoma already has faux vents next to its headlights. Now, they can actually be functional to keep your resistors cool.
very helpful, originally hooked up wires just to drls so had hyperflash at night. its fixed now 😊
Awesome, we are happy our video was able to help!
I would Kill for that Hair ! It either turns loose or turns grey , and mine has done both ..... Thanks for this tip that I probably will encounter after I install mine on my 2007 X-Runner .
Thanks for the video, I just replaced mine on my 2010 Tacoma, and your video made it easy. Do you have any idea how long these resistors last?
For some reason my blinkers don't work at all. High beam and low beam work fine. The rear stock blinkers work fine. I have emailed AlphaRex.
Hi there, I am recently just installed these onto my 2013 Tacoma, and I don't get my DRL's or turnsignals. Everything else seems to run properly. I am have some contact with Alpharex, but nothing has been resolved yet. Do you have any advice? Feeling bummed they are not working properly.
Thank you for this video brotha.
Glad you found this video valuable 😊
I sure hope that I have that already when I bought the Headlights , it comes with 1 DRL Converter , and you buy a pair of Converter Harness kit . I'm guessing maybe of those 3 black boxes , 1 is a resistor >?
If you have LED turn signals on front and rear you can get rid of the resistors and replace your turn signal flasher relay with a LED specific one. More streamline, no worry of resistors burning up, bad connections, and lower voltage consumption. Just a different way of correcting hyper flash.
Thank you for probably the most explained version of the relay fix we have ever received. We will look into that for sure to help guide others with that info as well in the future!
Great info 👍🏽
You going to be at Expo East?
I just installed the resisters is not hyper flashing in the cab but the actual headlights are flashing the turn signal
I just got the pros installed on mine which uses halogen low beams. I’m about to replace them with LED bulbs. Will this cause the hyper flash problem?
It should only be possible if the turn signals are being changed out to LED. If it’s just the low beam it I don’t believe it will affect it.
What LED bulbs did you end up swapping with??
Thx I needed this vid.
Glad you found it, and hope it helped!
in my case, i had both alpharex headlights and tail lights, had hyperflash. They sent me resistors and told me to put them on the tail lights, problem fixed. so i guess adding the resistors on either or works fine 👍(this may or may not be right but I think if you have oem tail lights and you install alpharex headlights you wont have hyper flash issue because there is already resistors built onto the headlight)
That’s interesting, it really seems like hit or miss with this issue. Just recently talked to another individual asking about some other options he found to fix the problem as he wanted to be able to correct them during the initial install. had same situation as you, he installed both new AlphaRex headlights and tail lights however he ended up not even having the problem with either one. I’m sure this is why they don’t just send the resistors initially with the product, they likely only have some that experience the problem and have no way to tell which sets will experience it. Maybe it’s all situational.
Do you know what kind of resistors they sent you? How many watt and ohms?
@@artoli7054 they are un-branded but they are for sure 10 ohm resistors (one for each side)
Hey I have alpharex headlights and they have resistors already and the passenger side has hyperflash any tips to find the issue?
Wouldn't replacing the flasher with an LED flasher be an easier fix for the hyper-flash?
It would normally, but the wiring in the later 2nd gens 2012-2015 is way different. If you change the relay the front light will not flash at all.
The 2nd gen with DRL's have an 18pin box that controls the flashing. It doesn't even use a standard type flasher relay.
I have the same hyper flash issues. I contacted the seller who pointed me to alphare. I contacted alpharex but having difficulties obtaining support/ just spinning my wheels. Can you advise who to contact to obtain the resistor to fix my hyperflash issues?
I just got one of these today sounds like a headache to install
Hey bro, can you send me the link for the resistors? I would like to get some too. thank you
Can you please send me the link to where you bought the resistor? I’m having the same issue.
I had the same issue, make sure all the prongs in the male end of the plugs are straight and not bent. My issue was one of the prongs were bent and not going into the female end correctly making the turn signal to hyperflash. I zoomed in to the video and it kinda looked like one of the prongs were bent
Do you mean that the harness is actually plugged in correctly? I'm having hyperflash when my turn signal is on but they already have resistors and it's only on the passenger turn signal
In my case, one of the metal prongs in the headlight plug was bent over, not going into the holes making the headlight hyperflash. Just look inside the plug and make sure all of the metal prongs go into the holes in the wiring correctly. I did not use a resistor.
@@alfredopeliajr.9229 ok I'll check that cause mine have already resistors attached to the headlights and only the passenger side will hyperflash when turn signal is on
Thanks
Is this only an older car thing? I have a 2023 4runner with this issue and I’m in the middle of communicating with Alpharex and they don’t think this is the issue
i have the same problem with my lights what is that called to fix
I have a problem with the driver side
Don’t blink of all
I have Alpharex in Tacoma 2013
You know how fix
Thanks
Did you get it fixed I have the same issue
@@troygregory4127 I have the same issue. Did you ever find a fix? My right side still hyper flashes
Having the same hyperflash issue, do you know what size resistor you used?
Did you findout?
For your Tacoma when you turn the switch to the off position does your DRL turn off or constantly stay on? Because mine stays on
The AlphaRex DRLs stay on all the time. We just resolved this issue by installing an electronics manager and will have a video come out in the next few weeks that will go into it a little further!
I installed one in my 2014 it was plug and play for me only thing you have to make sure you do is do not install anything in the fuse box in the engine bay install like this guy did in the fuse box next to the steering wheel
We are happy it all went well for you!
Why not install in fuse box in engine bay?
@@mlapl03 because the fuse in the engine bay is tied to the evap system which momentarily turns on while the truck is off. You may see the lights come on during the night or odd times during the day. It also causes the DRL's to flicker during your engine start/crank which could potentially lower the life span of the LEDs.
@@justifiedbyfaith8971 so would it just be better to not put that in or in some other place
@@aharonvazquez3646 The Alpharex DRL and turn signals require the control box to function. You just want to run a wire from inside the cab to the engine bay instead of using the fuse tap inside the engine bay fuse box. Take note that you will need to cut the fuse tap and add on some wire to extend it. 1. Starting at the fuse tap, Cut off about 8" from the fuse tap and wire. 2. Solder an additional 3-4' of 16-18ga wire. 3. Plug the fuse tap into the fuse box inside the cab that is left of the steering wheel. 4. Run the new wire through the firewall. There are 2 grommets in the engine bay firewall that gives you access to the cabin. The top one has interior carpet trim that prevents you from just feeding the wire through. If you take a slim screw driver, you can shove it through. Tape the wire to the screw driver with electrical tape tightly and pull the screw driver back out. This will fish the wire into the engine bay for you. 5. Strip both ends of the old wire and the new wire and use a butt connector or male/female quick disconnects to connect the wires back. The fuse that you can tap into is the radio fuse.
Does one resistor fix the headlight and taillight? Or do you need a resistor for the front and another for the back?
It would fix both bc that’s the only reason your taillight is hyper flashing bc the front one is doing it as soon as you fix the front one it should control the back one
What size are the resistors, I can't find the alpha rex ones anywhere
Did you find out??
where do I exactly buy the resistors for my truck?
We recommend reaching out directly to AlphaRex!
What year is your Tacoma? I just installed the same headlights to my 2015 Tacoma Limited and I didn't have the hyper flashing turn signal, because I have a led bulb on my rear turn signal which I have installed the resistors for that reason 😅 maybe since they are powered by the same line that's why I didn't have that issue when I installed my Alpharex NOVA Series.
Loki is a 2014 TRD Off-road, we’ve been getting a lot of mixed reports of others either getting hyper flash or not with a variety of situations. Some have had it just installing the tail lights and some have had no issues at all with the same headlights and taillights installed just like us. From what we gather and based off talks with AlphaRex customer support it’s just random as to wether or not it will happen between the product and the truck itself. But either way it’s awesome to hear about your experience and that you didn’t have to hassle with the resistors for your install, it wasn’t bad to do just another step and added stuff is all. Thanks for sharing!
On your 2015 tacoma can u turn off the DRL with your switch or does it constantly stay on ?
@@Th33Oth3rGuy unfortunately the DRL switch is disabled so the surrounding light is constantly on. Other than that it’s all good 👍 I love my alpha rex light 😀
Was this only on passenger side for you as well?
No, both our driver side and passenger side lights were hyper flashing.
Does adding 1 resistor fix all hyperflash? Or they go individually to each one that has hyoerflash?
Each light will get its own resistor, it’s basically to look like the bulb for each side
Do your drl stay on after locking the truck?
For a short time yes, I believe the intention is to leave some light on the ground for walking away Convenience.
how the heck should I be doing all that on a 800 bucks headlights 🤷♂ since they are so expensive then they need to do two versions.
Did you ever find the part number to the resistor kit need for the headlights? Having the same issue with mine
I did! The package is actually a 2 piece set of 10 ohm resistors. The O in ohm is too close to the 10 so I read it as 100 ohm. They are in fact 10 OHM resistors.
Part number listed on the package is just as follows AHL-LR-10OHM-2PC
There is nothing listed physically on the actual resistors.
If you have an alpha Rex product, I recommend giving them a call as I don’t think they have it on their site for sell. They will either send them to you for free or I think can send them for I think $15 if they weren’t the original seller to you.
I hope this info finds you well and helps you fix your issue!
@@SunshineStateVikings I tried looking up that part number on Amazon and Google but didn't get any results. I've been told by someone that any resister will work, even 6 Ohm resisters.
Alpharex sent me resistors for my taillights but no instructions
It certainly is frustrating that they do that. Which is precisely why we made this video to help others navigate the installation. We hope the video helped you install them 👍
Second gen Tacoma owner. Love these AlphaRex headlights. Hyper-flash issue drove me nuts. Reached out to TacomaBeast and they sent me a pair of resisters. Watched this video and the issue was resolved in less than 20 minutes. Thanks for a quick and easy fix Zach!
Does it matter what resistance they are? Does 50watt/6ohm resistors fix the hyper flash?
I have a 11 Tacoma with the factory DRL and the 12-15 front conversion. I already have the alpha Rex tails. Curious to see if I will have hyper flashing or not when I get my headlights
Did you have the issue or they already fix it?!!!
Can you provide the part number of the provided resistors and confirm what their resistance is? I thought you said they were 100 ohm which sounds pretty high as I've heard others that had to install resistors on their LED headlights only needed 5 to 6 ohm resistors.
We are currently away from home but as soon as we get back we can confirm that for you. They are definitely 100 ohm from I remember. I also am not sure if they sell it. All we had to do was let them know we had the issue and they sent them out to us
@@SunshineStateVikings hi, any luck finding out the specific model/ohm of resistors you used? Thx!
Intael everything as you show in the video, but now it doesn't start, my tacoma is a 2008 model, do you have a solution, thank you
hello, the hyper flash happens on the driverside for me. Do i just tap it in the same wires you did but on the drivers side?
Yes, that is all that should need to happen. Just be sure to confirm that your wires your about to tap are the turn signal leads just like we showed in the video, you are merely adding resistance to that circuit so your computer thinks the incandescent bulb is still there. Hope this helps, and feel free to ask any other questions you might have!
It totally sucks that There’s this “issue” with the headlights AND with the Tail lights as well.. Alpharex AND Tacomabeast should make sure the Resistors come WITH the products they sell…. I now need a pair of resistors and Tacomabeast is all out of stock .. so I have ordered some off of Amazon and will have to wire them in myself . 👎🏼
We totally agree it would make it easier if the resistors came with the product. Otherwise the lights are a solid product and we still love ours. Hopefully you get your issue resolved. We also recommend contacting AlphaRex directly about the issue.
I was able to install the resistors I got from Amazon in about 20mins.. was super easy and fast to do… but still having to drive around with my lights all twacked out for a week sucked.. but it is now fixed and working perfectly. 👍
@@mauiazn32 happy it all worked out 💪
What was the link for the Amazon resistors
Great video. I currently have a similar problem on my F-150 Alpha Rex send me a pair of harnesses and supposedly should solve the issue, but it didn't work, yet they sent me a new set of headlights, but the issue persists. Do you think I have the same problem you had?!